linux-kernel - [PATCH 05/17] pmdomain: bcm: Move Kconfig options to the pmdomain subsystem

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [day] [month] [year] [list]
Message-Id: <20230914111721.586543-1-ulf.hansson@linaro.org>
Date:   Thu, 14 Sep 2023 13:17:21 +0200
From:   Ulf Hansson <ulf.hansson@...aro.org>
To:     Arnd Bergmann <arnd@...db.de>, Olof Johansson <olof@...om.net>
Cc:     Ulf Hansson <ulf.hansson@...aro.org>, linux-pm@...r.kernel.org,
        linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
        Florian Fainelli <florian.fainelli@...adcom.com>,
        Ray Jui <rjui@...adcom.com>,
        Scott Branden <sbranden@...adcom.com>,
        linux-mips@...r.kernel.org, linux-rpi-kernel@...ts.infradead.org
Subject: [PATCH 05/17] pmdomain: bcm: Move Kconfig options to the pmdomain subsystem

The Kconfig options belongs closer to the corresponding implementations,
hence let's move them from the soc subsystem to the pmdomain subsystem.

Cc: Florian Fainelli <florian.fainelli@...adcom.com>
Cc: Ray Jui <rjui@...adcom.com>
Cc: Scott Branden <sbranden@...adcom.com>
Cc: <linux-mips@...r.kernel.org>
Cc: <linux-rpi-kernel@...ts.infradead.org>
Signed-off-by: Ulf Hansson <ulf.hansson@...aro.org>
---
 drivers/pmdomain/Kconfig     |  1 +
 drivers/pmdomain/bcm/Kconfig | 46 ++++++++++++++++++++++++++++++++++++
 drivers/soc/bcm/Kconfig      | 42 --------------------------------
 3 files changed, 47 insertions(+), 42 deletions(-)
 create mode 100644 drivers/pmdomain/bcm/Kconfig

diff --git a/drivers/pmdomain/Kconfig b/drivers/pmdomain/Kconfig
index 55a9ca191849..a0569a44ff4b 100644
--- a/drivers/pmdomain/Kconfig
+++ b/drivers/pmdomain/Kconfig
@@ -4,5 +4,6 @@ menu "Power Domains Support"
 source "drivers/pmdomain/actions/Kconfig"
 source "drivers/pmdomain/amlogic/Kconfig"
 source "drivers/pmdomain/apple/Kconfig"
+source "drivers/pmdomain/bcm/Kconfig"
 
 endmenu
diff --git a/drivers/pmdomain/bcm/Kconfig b/drivers/pmdomain/bcm/Kconfig
new file mode 100644
index 000000000000..a4ee960b4749
--- /dev/null
+++ b/drivers/pmdomain/bcm/Kconfig
@@ -0,0 +1,46 @@
+# SPDX-License-Identifier: GPL-2.0-only
+menu "Broadcom Power Domains"
+
+config BCM2835_POWER
+	bool "BCM2835 power domain driver"
+	depends on ARCH_BCM2835 || (COMPILE_TEST && OF)
+	default y if ARCH_BCM2835
+	select PM_GENERIC_DOMAINS if PM
+	select RESET_CONTROLLER
+	help
+	  This enables support for the BCM2835 power domains and reset
+	  controller.  Any usage of power domains by the Raspberry Pi
+	  firmware means that Linux usage of the same power domain
+	  must be accessed using the RASPBERRYPI_POWER driver
+
+config RASPBERRYPI_POWER
+	bool "Raspberry Pi power domain driver"
+	depends on ARCH_BCM2835 || (COMPILE_TEST && OF)
+	depends on RASPBERRYPI_FIRMWARE=y
+	select PM_GENERIC_DOMAINS if PM
+	help
+	  This enables support for the RPi power domains which can be enabled
+	  or disabled via the RPi firmware.
+
+config BCM_PMB
+	bool "Broadcom PMB (Power Management Bus) driver"
+	depends on ARCH_BCMBCA || (COMPILE_TEST && OF)
+	default ARCH_BCMBCA
+	select PM_GENERIC_DOMAINS if PM
+	help
+	  This enables support for the Broadcom's PMB (Power Management Bus) that
+	  is used for disabling and enabling SoC devices.
+
+if SOC_BCM63XX
+
+config BCM63XX_POWER
+	bool "BCM63xx power domain driver"
+	depends on BMIPS_GENERIC || (COMPILE_TEST && OF)
+	select PM_GENERIC_DOMAINS if PM
+	help
+	  This enables support for the BCM63xx power domains controller on
+	  BCM6318, BCM6328, BCM6362 and BCM63268 SoCs.
+
+endif # SOC_BCM63XX
+
+endmenu
diff --git a/drivers/soc/bcm/Kconfig b/drivers/soc/bcm/Kconfig
index f96906795fa6..406617aa3056 100644
--- a/drivers/soc/bcm/Kconfig
+++ b/drivers/soc/bcm/Kconfig
@@ -1,27 +1,6 @@
 # SPDX-License-Identifier: GPL-2.0-only
 menu "Broadcom SoC drivers"
 
-config BCM2835_POWER
-	bool "BCM2835 power domain driver"
-	depends on ARCH_BCM2835 || (COMPILE_TEST && OF)
-	default y if ARCH_BCM2835
-	select PM_GENERIC_DOMAINS if PM
-	select RESET_CONTROLLER
-	help
-	  This enables support for the BCM2835 power domains and reset
-	  controller.  Any usage of power domains by the Raspberry Pi
-	  firmware means that Linux usage of the same power domain
-	  must be accessed using the RASPBERRYPI_POWER driver
-
-config RASPBERRYPI_POWER
-	bool "Raspberry Pi power domain driver"
-	depends on ARCH_BCM2835 || (COMPILE_TEST && OF)
-	depends on RASPBERRYPI_FIRMWARE=y
-	select PM_GENERIC_DOMAINS if PM
-	help
-	  This enables support for the RPi power domains which can be enabled
-	  or disabled via the RPi firmware.
-
 config SOC_BCM63XX
 	bool "Broadcom 63xx SoC drivers"
 	depends on BMIPS_GENERIC || COMPILE_TEST
@@ -42,27 +21,6 @@ config SOC_BRCMSTB
 
 	  If unsure, say N.
 
-config BCM_PMB
-	bool "Broadcom PMB (Power Management Bus) driver"
-	depends on ARCH_BCMBCA || (COMPILE_TEST && OF)
-	default ARCH_BCMBCA
-	select PM_GENERIC_DOMAINS if PM
-	help
-	  This enables support for the Broadcom's PMB (Power Management Bus) that
-	  is used for disabling and enabling SoC devices.
-
-if SOC_BCM63XX
-
-config BCM63XX_POWER
-	bool "BCM63xx power domain driver"
-	depends on BMIPS_GENERIC || (COMPILE_TEST && OF)
-	select PM_GENERIC_DOMAINS if PM
-	help
-	  This enables support for the BCM63xx power domains controller on
-	  BCM6318, BCM6328, BCM6362 and BCM63268 SoCs.
-
-endif # SOC_BCM63XX
-
 source "drivers/soc/bcm/brcmstb/Kconfig"
 
 endmenu
-- 
2.34.1