linux-kernel - Re: [PATCH v2 05/17] pmdomain: bcm: Move Kconfig options to the pmdomain subsystem

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <71ab660c-bee3-038f-665c-cda04f18cf6d@broadcom.com>
Date:   Fri, 15 Sep 2023 09:30:58 -0700
From:   Florian Fainelli <florian.fainelli@...adcom.com>
To:     Ulf Hansson <ulf.hansson@...aro.org>,
        Arnd Bergmann <arnd@...db.de>, Olof Johansson <olof@...om.net>
Cc:     linux-pm@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
        linux-kernel@...r.kernel.org, Ray Jui <rjui@...adcom.com>,
        Scott Branden <sbranden@...adcom.com>,
        linux-mips@...r.kernel.org, linux-rpi-kernel@...ts.infradead.org
Subject: Re: [PATCH v2 05/17] pmdomain: bcm: Move Kconfig options to the
 pmdomain subsystem

On 9/15/23 02:19, Ulf Hansson wrote:
> The Kconfig options belongs closer to the corresponding implementations,
> hence let's move them from the soc subsystem to the pmdomain subsystem.
> 
> Cc: Florian Fainelli <florian.fainelli@...adcom.com>
> Cc: Ray Jui <rjui@...adcom.com>
> Cc: Scott Branden <sbranden@...adcom.com>
> Cc: <linux-mips@...r.kernel.org>
> Cc: <linux-rpi-kernel@...ts.infradead.org>
> Signed-off-by: Ulf Hansson <ulf.hansson@...aro.org>
> ---
>   drivers/pmdomain/Kconfig     |  1 +
>   drivers/pmdomain/bcm/Kconfig | 46 ++++++++++++++++++++++++++++++++++++
>   drivers/soc/bcm/Kconfig      | 42 --------------------------------
>   3 files changed, 47 insertions(+), 42 deletions(-)
>   create mode 100644 drivers/pmdomain/bcm/Kconfig
> 
> diff --git a/drivers/pmdomain/Kconfig b/drivers/pmdomain/Kconfig
> index 482d9e970e14..ddc05d6af100 100644
> --- a/drivers/pmdomain/Kconfig
> +++ b/drivers/pmdomain/Kconfig
> @@ -4,5 +4,6 @@ menu "PM Domains"
>   source "drivers/pmdomain/actions/Kconfig"
>   source "drivers/pmdomain/amlogic/Kconfig"
>   source "drivers/pmdomain/apple/Kconfig"
> +source "drivers/pmdomain/bcm/Kconfig"
>   
>   endmenu
> diff --git a/drivers/pmdomain/bcm/Kconfig b/drivers/pmdomain/bcm/Kconfig
> new file mode 100644
> index 000000000000..9311e90b7707
> --- /dev/null
> +++ b/drivers/pmdomain/bcm/Kconfig
> @@ -0,0 +1,46 @@
> +# SPDX-License-Identifier: GPL-2.0-only
> +menu "Broadcom PM Domains"
> +
> +config BCM2835_POWER
> +	bool "BCM2835 power domain driver"
> +	depends on ARCH_BCM2835 || (COMPILE_TEST && OF)
> +	default y if ARCH_BCM2835
> +	select PM_GENERIC_DOMAINS if PM
> +	select RESET_CONTROLLER
> +	help
> +	  This enables support for the BCM2835 power domains and reset
> +	  controller.  Any usage of power domains by the Raspberry Pi
> +	  firmware means that Linux usage of the same power domain
> +	  must be accessed using the RASPBERRYPI_POWER driver
> +
> +config RASPBERRYPI_POWER
> +	bool "Raspberry Pi power domain driver"
> +	depends on ARCH_BCM2835 || (COMPILE_TEST && OF)
> +	depends on RASPBERRYPI_FIRMWARE=y
> +	select PM_GENERIC_DOMAINS if PM
> +	help
> +	  This enables support for the RPi power domains which can be enabled
> +	  or disabled via the RPi firmware.
> +
> +config BCM_PMB
> +	bool "Broadcom PMB (Power Management Bus) driver"
> +	depends on ARCH_BCMBCA || (COMPILE_TEST && OF)
> +	default ARCH_BCMBCA
> +	select PM_GENERIC_DOMAINS if PM
> +	help
> +	  This enables support for the Broadcom's PMB (Power Management Bus) that
> +	  is used for disabling and enabling SoC devices.
> +
> +if SOC_BCM63XX
> +
> +config BCM63XX_POWER
> +	bool "BCM63xx power domain driver"
> +	depends on BMIPS_GENERIC || (COMPILE_TEST && OF)
> +	select PM_GENERIC_DOMAINS if PM
> +	help
> +	  This enables support for the BCM63xx power domains controller on
> +	  BCM6318, BCM6328, BCM6362 and BCM63268 SoCs.
> +
> +endif # SOC_BCM63XX

That is confusing, SOC_BCM63XX remains defined in 
drivers/soc/bcm/Kconfig, but we now made BCM63XX_POWER's visibility 
conditional upon a Kconfig symbol defined elsewhere, I would just drop 
the "if" condition completely.
-- 
Florian


Download attachment "smime.p7s" of type "application/pkcs7-signature" (4221 bytes)