[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <SN6PR11MB26245C44E84C37C1B551260EF4F6A@SN6PR11MB2624.namprd11.prod.outlook.com>
Date: Fri, 15 Sep 2023 05:31:25 +0000
From: "Xu, Even" <even.xu@...el.com>
To: srinivas pandruvada <srinivas.pandruvada@...ux.intel.com>,
Kai-Heng Feng <kai.heng.feng@...onical.com>,
"jikos@...nel.org" <jikos@...nel.org>,
"benjamin.tissoires@...hat.com" <benjamin.tissoires@...hat.com>
CC: "linux-pm@...r.kernel.org" <linux-pm@...r.kernel.org>,
"linux-pci@...r.kernel.org" <linux-pci@...r.kernel.org>,
"Lee, Jian Hui" <jianhui.lee@...onical.com>,
"Zhang, Lixu" <lixu.zhang@...el.com>,
"Ba, Najumon" <najumon.ba@...el.com>,
"linux-input@...r.kernel.org" <linux-input@...r.kernel.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>
Subject: RE: [PATCH] HID: intel-ish-hid: ipc: Rework EHL OOB wakeup
Hi, Srinivas,
Sure, I will test it.
As long term not working on EHL, I doesn't have EHL board on hand right now, I can test this patch on other ISH related platforms.
From the patch, it's focus on EHL platform, I assume Kai-Heng already verified the function on EHL board.
I don't think it will take effect on other platforms, anyway, I will test it on the platforms I have to provide cross platform verification.
Thanks!
Best Regards,
Even Xu
-----Original Message-----
From: srinivas pandruvada <srinivas.pandruvada@...ux.intel.com>
Sent: Friday, September 15, 2023 12:11 AM
To: Kai-Heng Feng <kai.heng.feng@...onical.com>; jikos@...nel.org; benjamin.tissoires@...hat.com
Cc: linux-pm@...r.kernel.org; linux-pci@...r.kernel.org; Lee, Jian Hui <jianhui.lee@...onical.com>; Xu, Even <even.xu@...el.com>; Zhang, Lixu <lixu.zhang@...el.com>; Ba, Najumon <najumon.ba@...el.com>; linux-input@...r.kernel.org; linux-kernel@...r.kernel.org
Subject: Re: [PATCH] HID: intel-ish-hid: ipc: Rework EHL OOB wakeup
Hi Even,
On Thu, 2023-09-14 at 12:18 +0800, Kai-Heng Feng wrote:
> System cannot suspend more than 255 times because the driver doesn't
> have corresponding acpi_disable_gpe() for acpi_enable_gpe(), so the
> GPE refcount overflows.
>
> Since PCI core and ACPI core already handles PCI PME wake and GPE wake
> when the device has wakeup capability, use device_init_wakeup() to let
> them do the wakeup setting work.
>
> Also add a shutdown callback which uses pci_prepare_to_sleep() to let
> PCI and ACPI set OOB wakeup for S5.
>
Please test this change.
Thanks,
Srinivas
> Fixes: 2e23a70edabe ("HID: intel-ish-hid: ipc: finish power flow for
> EHL OOB")
> Cc: Jian Hui Lee <jianhui.lee@...onical.com>
> Signed-off-by: Kai-Heng Feng <kai.heng.feng@...onical.com>
> ---
> drivers/hid/intel-ish-hid/ipc/pci-ish.c | 59 +++++++----------------
> --
> 1 file changed, 15 insertions(+), 44 deletions(-)
>
> diff --git a/drivers/hid/intel-ish-hid/ipc/pci-ish.c
> b/drivers/hid/intel-ish-hid/ipc/pci-ish.c
> index 55cb25038e63..65e7eeb2fa64 100644
> --- a/drivers/hid/intel-ish-hid/ipc/pci-ish.c
> +++ b/drivers/hid/intel-ish-hid/ipc/pci-ish.c
> @@ -119,42 +119,6 @@ static inline bool ish_should_leave_d0i3(struct
> pci_dev *pdev)
> return !pm_resume_via_firmware() || pdev->device ==
> CHV_DEVICE_ID;
> }
>
> -static int enable_gpe(struct device *dev) -{ -#ifdef CONFIG_ACPI
> - acpi_status acpi_sts;
> - struct acpi_device *adev;
> - struct acpi_device_wakeup *wakeup;
> -
> - adev = ACPI_COMPANION(dev);
> - if (!adev) {
> - dev_err(dev, "get acpi handle failed\n");
> - return -ENODEV;
> - }
> - wakeup = &adev->wakeup;
> -
> - acpi_sts = acpi_enable_gpe(wakeup->gpe_device, wakeup-
> >gpe_number);
> - if (ACPI_FAILURE(acpi_sts)) {
> - dev_err(dev, "enable ose_gpe failed\n");
> - return -EIO;
> - }
> -
> - return 0;
> -#else
> - return -ENODEV;
> -#endif
> -}
> -
> -static void enable_pme_wake(struct pci_dev *pdev) -{
> - if ((pci_pme_capable(pdev, PCI_D0) ||
> - pci_pme_capable(pdev, PCI_D3hot) ||
> - pci_pme_capable(pdev, PCI_D3cold)) && !enable_gpe(&pdev-
> >dev)) {
> - pci_pme_active(pdev, true);
> - dev_dbg(&pdev->dev, "ish ipc driver pme wake
> enabled\n");
> - }
> -}
> -
> /**
> * ish_probe() - PCI driver probe callback
> * @pdev: pci device
> @@ -225,7 +189,7 @@ static int ish_probe(struct pci_dev *pdev, const
> struct pci_device_id *ent)
>
> /* Enable PME for EHL */
> if (pdev->device == EHL_Ax_DEVICE_ID)
> - enable_pme_wake(pdev);
> + device_init_wakeup(dev, true);
>
> ret = ish_init(ishtp);
> if (ret)
> @@ -248,6 +212,19 @@ static void ish_remove(struct pci_dev *pdev)
> ish_device_disable(ishtp_dev);
> }
>
> +
> +/**
> + * ish_shutdown() - PCI driver shutdown callback
> + * @pdev: pci device
> + *
> + * This function sets up wakeup for S5 */ static void
> +ish_shutdown(struct pci_dev *pdev) {
> + if (pdev->device == EHL_Ax_DEVICE_ID)
> + pci_prepare_to_sleep(pdev); }
> +
> static struct device __maybe_unused *ish_resume_device;
>
> /* 50ms to get resume response */
> @@ -370,13 +347,6 @@ static int __maybe_unused ish_resume(struct
> device *device)
> struct pci_dev *pdev = to_pci_dev(device);
> struct ishtp_device *dev = pci_get_drvdata(pdev);
>
> - /* add this to finish power flow for EHL */
> - if (dev->pdev->device == EHL_Ax_DEVICE_ID) {
> - pci_set_power_state(pdev, PCI_D0);
> - enable_pme_wake(pdev);
> - dev_dbg(dev->devc, "set power state to D0 for ehl\n");
> - }
> -
> ish_resume_device = device;
> dev->resume_flag = 1;
>
> @@ -392,6 +362,7 @@ static struct pci_driver ish_driver = {
> .id_table = ish_pci_tbl,
> .probe = ish_probe,
> .remove = ish_remove,
> + .shutdown = ish_shutdown,
> .driver.pm = &ish_pm_ops,
> };
>
Powered by blists - more mailing lists