Message-ID: <fed0bbb0-9c94-7dac-4956-f6c9b231fc0d@loongson.cn>
Date:   Fri, 15 Sep 2023 14:58:25 +0800
From:   zhaotianrui <zhaotianrui@...ngson.cn>
To:     Huacai Chen <chenhuacai@...nel.org>
Cc:     linux-kernel@...r.kernel.org, kvm@...r.kernel.org,
        Paolo Bonzini <pbonzini@...hat.com>,
        WANG Xuerui <kernel@...0n.name>,
        Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
        loongarch@...ts.linux.dev, Jens Axboe <axboe@...nel.dk>,
        Mark Brown <broonie@...nel.org>,
        Alex Deucher <alexander.deucher@....com>,
        Oliver Upton <oliver.upton@...ux.dev>, maobibo@...ngson.cn,
        Xi Ruoyao <xry111@...111.site>
Subject: Re: [PATCH v21 00/29] Add KVM LoongArch support


在 2023/9/15 下午12:11, Huacai Chen 写道:
> Hi, Tianrui,
>
> On Fri, Sep 15, 2023 at 9:50 AM Tianrui Zhao <zhaotianrui@...ngson.cn> wrote:
>> This series adds KVM LoongArch support. Loongson 3A5000 supports hardware
>> assisted virtualization. With cpu virtualization, there are separate
>> hw-supported user mode and kernel mode in guest mode. With memory
>> virtualization, there are two-level hw mmu table for guest mode and host
>> mode. Also there is separate hw cpu timer with consant frequency in
>> guest mode, so that vm can migrate between hosts with different freq.
>> Currently, we are able to boot LoongArch Linux Guests.
>>
>> Few key aspects of KVM LoongArch added by this series are:
>> 1. Enable kvm hardware function when kvm module is loaded.
>> 2. Implement VM and vcpu related ioctl interface such as vcpu create,
>>     vcpu run etc. GET_ONE_REG/SET_ONE_REG ioctl commands are use to
>>     get general registers one by one.
>> 3. Hardware access about MMU, timer and csr are emulated in kernel.
>> 4. Hardwares such as mmio and iocsr device are emulated in user space
>>     such as APIC, IPI, pci devices etc.
>>
>> The running environment of LoongArch virt machine:
>> 1. Cross tools for building kernel and uefi:
>>     https://github.com/loongson/build-tools
>> 2. This series is based on the linux source code:
>>     https://github.com/loongson/linux-loongarch-kvm
>>     Build command:
>>     git checkout kvm-loongarch
>>     make ARCH=loongarch CROSS_COMPILE=loongarch64-unknown-linux-gnu- loongson3_defconfig
>>     make ARCH=loongarch CROSS_COMPILE=loongarch64-unknown-linux-gnu-
>> 3. QEMU hypervisor with LoongArch supported:
>>     https://github.com/loongson/qemu
>>     Build command:
>>     git checkout kvm-loongarch
>>     ./configure --target-list="loongarch64-softmmu"  --enable-kvm
>>     make
> When I build qemu, I get:
> [3/964] Compiling C object
> libqemu-loongarch64-softmmu.fa.p/target_loongarch_loongarch-qmp-cmds.c.o
> FAILED: libqemu-loongarch64-softmmu.fa.p/target_loongarch_loongarch-qmp-cmds.c.o
> cc -Ilibqemu-loongarch64-softmmu.fa.p -I. -I.. -Itarget/loongarch
> -I../target/loongarch -Isubprojects/dtc/libfdt
> -I../subprojects/dtc/libfdt -Iqapi -Itrace c
> In file included from ../target/loongarch/loongarch-qmp-cmds.c:11:
> ../target/loongarch/cpu.h:351:14: error: duplicate member 'CSR_CPUID'
>    351 |     uint64_t CSR_CPUID;
>        |              ^~~~~~~~~
> ninja: build stopped: subcommand failed.
> make[1]: *** [Makefile:162: run-ninja] Error 1
> make[1]: Leaving directory '/root/qemu/build'
> make: *** [GNUmakefile:11: all] Error 2
>
> Huacai
Sorry, I have submitted patch to fix this error, you could git pull to 
update it.

Thanks
Tianrui Zhao
>
>> 4. Uefi bios of LoongArch virt machine:
>>     Link: https://github.com/tianocore/edk2-platforms/tree/master/Platform/Loongson/LoongArchQemuPkg#readme
>> 5. you can also access the binary files we have already build:
>>     https://github.com/yangxiaojuan-loongson/qemu-binary
>> The command to boot loongarch virt machine:
>>     $ qemu-system-loongarch64 -machine virt -m 4G -cpu la464 \
>>     -smp 1 -bios QEMU_EFI.fd -kernel vmlinuz.efi -initrd ramdisk \
>>     -serial stdio   -monitor telnet:localhost:4495,server,nowait \
>>     -append "root=/dev/ram rdinit=/sbin/init console=ttyS0,115200" \
>>     --nographic
>>
>> Changes for v21:
>> 1. Remove unnecessary prefix '_' in some kvm function names.
>> 2. Replace check_vmid with check_vpid, and move the functions
>> to main.c.
>> 3. Re-order the file names and config names by alphabetical
>> in KVM makefile and Kconfig.
>> 4. Code clean up for KVM mmu and get,set gcsr and vcpu_arch
>> ioctl functions.
>>
>> changes for v20:
>> 1. Remove the binary code of virtualization instructions in
>> insn_def.h and csr_ops.S and directly use the default csrrd,
>> csrwr,csrxchg instructions. And let CONFIG_KVM depends on the
>> AS_HAS_LVZ_EXTENSION, so we should use the binutils that have
>> already supported them to compile the KVM. This can make our
>> LoongArch KVM codes more maintainable and easier.
>>
>> changes for v19:
>> 1. Use the common interface xfer_to_guest_mode_handle_work to
>> Check conditions before entering the guest.
>> 2. Add vcpu dirty ring support.
>>
>> changes for v18:
>> 1. Code cleanup for vcpu timer: remove unnecessary timer_period_ns,
>> timer_bias, timer_dyn_bias variables in kvm_vcpu_arch and rename
>> the stable_ktime_saved variable to expire.
>> 2. Change the value of KVM_ARCH_NR_OBJS_PER_MEMORY_CACHE to 40.
>>
>> changes for v17:
>> 1. Add CONFIG_AS_HAS_LVZ_EXTENSION config option which depends on
>> binutils that support LVZ assemble instruction.
>> 2. Change kvm mmu related functions, such as rename level2_ptw_pgd
>> to kvm_ptw_pgd, replace kvm_flush_range with kvm_ptw_pgd pagewalk
>> framework, replace kvm_arch.gpa_mm with kvm_arch.pgd, set
>> mark_page_dirty/kvm_set_pfn_dirty out of mmu_lock in kvm page fault
>> handling.
>> 3. Replace kvm_loongarch_interrupt with standard kvm_interrupt
>> when injecting IRQ.
>> 4. Replace vcpu_arch.last_exec_cpu with existing vcpu.cpu, remove
>> kvm_arch.online_vcpus and kvm_arch.is_migrating,
>> 5. Remove EXCCODE_TLBNR and EXCCODE_TLBNX in kvm exception table,
>> since NR/NX bit is not set in kvm page fault handling.
>>
>> Changes for v16:
>> 1. Free allocated memory of vmcs,kvm_loongarch_ops in kvm module init,
>> exit to avoid memory leak problem.
>> 2. Simplify some assemble codes in switch.S which are necessary to be
>> replaced with pseudo-instructions. And any other instructions do not need
>> to be replaced anymore.
>> 3. Add kvm_{save,restore}_guest_gprs macros to replace these ld.d,st.d
>> guest regs instructions when vcpu world switch.
>> 4. It is more secure to disable irq when flush guest tlb by gpa, so replace
>> preempt_disable with loacl_irq_save in kvm_flush_tlb_gpa.
>>
>> Changes for v15:
>> 1. Re-order some macros and variables in LoongArch kvm headers, put them
>> together which have the same meaning.
>> 2. Make some function definitions in one line, as it is not needed to split
>> them.
>> 3. Re-name some macros such as KVM_REG_LOONGARCH_GPR.
>>
>> Changes for v14:
>> 1. Remove the macro CONFIG_KVM_GENERIC_HARDWARE_ENABLING in
>> loongarch/kvm/main.c, as it is not useful.
>> 2. Add select KVM_GENERIC_HARDWARE_ENABLING in loongarch/kvm/Kconfig,
>> as it is used by virt/kvm.
>> 3. Fix the LoongArch KVM source link in MAINTAINERS.
>> 4. Improve LoongArch KVM documentation, such as add comment for
>> LoongArch kvm_regs.
>>
>> Changes for v13:
>> 1. Remove patch-28 "Implement probe virtualization when cpu init", as the
>> virtualization information about FPU,PMP,LSX in guest.options,options_dyn
>> is not used and the gcfg reg value can be read in kvm_hardware_enable, so
>> remove the previous cpu_probe_lvz function.
>> 2. Fix vcpu_enable_cap interface, it should return -EINVAL directly, as
>> FPU cap is enable by default, and do not support any other caps now.
>> 3. Simplify the jirl instruction with jr when without return addr,
>> simplify case HW0 ... HW7 statment in interrupt.c
>> 4. Rename host_stack,host_gp in kvm_vcpu_arch to host_sp,host_tp.
>> 5. Remove 'cpu' parameter in _kvm_check_requests, as 'cpu' is not used,
>> and remove 'cpu' parameter in kvm_check_vmid function, as it can get
>> cpu number by itself.
>>
>> Changes for v12:
>> 1. Improve the gcsr write/read/xchg interface to avoid the previous
>> instruction statment like parse_r and make the code easy understanding,
>> they are implemented in asm/insn-def.h and the instructions consistent
>> of "opcode" "rj" "rd" "simm14" arguments.
>> 2. Fix the maintainers list of LoongArch KVM.
>>
>> Changes for v11:
>> 1. Add maintainers for LoongArch KVM.
>>
>> Changes for v10:
>> 1. Fix grammatical problems in LoongArch documentation.
>> 2. It is not necessary to save or restore the LOONGARCH_CSR_PGD when
>> vcpu put and vcpu load, so we remove it.
>>
>> Changes for v9:
>> 1. Apply the new defined interrupt number macros in loongarch.h to kvm,
>> such as INT_SWI0, INT_HWI0, INT_TI, INT_IPI, etc. And remove the
>> previous unused macros.
>> 2. Remove unused variables in kvm_vcpu_arch, and reorder the variables
>> to make them more standard.
>>
>> Changes for v8:
>> 1. Adjust the cpu_data.guest.options structure, add the ases flag into
>> it, and remove the previous guest.ases. We do this to keep consistent
>> with host cpu_data.options structure.
>> 2. Remove the "#include <asm/kvm_host.h>" in some files which also
>> include the "<linux/kvm_host.h>". As linux/kvm_host.h already include
>> the asm/kvm_host.h.
>> 3. Fix some unstandard spelling and grammar errors in comments, and
>> improve a little code format to make it easier and standard.
>>
>> Changes for v7:
>> 1. Fix the kvm_save/restore_hw_gcsr compiling warnings reported by
>> kernel test robot. The report link is:
>> https://lore.kernel.org/oe-kbuild-all/202304131526.iXfLaVZc-lkp@intel.com/
>> 2. Fix loongarch kvm trace related compiling problems.
>>
>> Changes for v6:
>> 1. Fix the Documentation/virt/kvm/api.rst compile warning about
>> loongarch parts.
>>
>> Changes for v5:
>> 1. Implement get/set mp_state ioctl interface, and only the
>> KVM_MP_STATE_RUNNABLE state is supported now, and other states
>> will be completed in the future. The state is also used when vcpu
>> run idle instruction, if vcpu state is changed to RUNNABLE, the
>> vcpu will have the possibility to be woken up.
>> 2. Supplement kvm document about loongarch-specific part, such as add
>> api introduction for GET/SET_ONE_REG, GET/SET_FPU, GET/SET_MP_STATE,
>> etc.
>> 3. Improve the kvm_switch_to_guest function in switch.S, remove the
>> previous tmp,tmp1 arguments and replace it with t0,t1 reg.
>>
>> Changes for v4:
>> 1. Add a csr_need_update flag in _vcpu_put, as most csr registers keep
>> unchanged during process context switch, so we need not to update it
>> every time. We can do this only if the soft csr is different form hardware.
>> That is to say all of csrs should update after vcpu enter guest, as for
>> set_csr_ioctl, we have written soft csr to keep consistent with hardware.
>> 2. Improve get/set_csr_ioctl interface, we set SW or HW or INVALID flag
>> for all csrs according to it's features when kvm init. In get/set_csr_ioctl,
>> if csr is HW, we use gcsrrd/ gcsrwr instruction to access it, else if csr is
>> SW, we use software to emulate it, and others return false.
>> 3. Add set_hw_gcsr function in csr_ops.S, and it is used in set_csr_ioctl.
>> We have splited hw gcsr into three parts, so we can calculate the code offset
>> by gcsrid and jump here to run the gcsrwr instruction. We use this function to
>> make the code easier and avoid to use the previous SET_HW_GCSR(XXX) interface.
>> 4. Improve kvm mmu functions, such as flush page table and make clean page table
>> interface.
>>
>> Changes for v3:
>> 1. Remove the vpid array list in kvm_vcpu_arch and use a vpid variable here,
>> because a vpid will never be recycled if a vCPU migrates from physical CPU A
>> to B and back to A.
>> 2. Make some constant variables in kvm_context to global such as vpid_mask,
>> guest_eentry, enter_guest, etc.
>> 3. Add some new tracepoints, such as kvm_trace_idle, kvm_trace_cache,
>> kvm_trace_gspr, etc.
>> 4. There are some duplicate codes in kvm_handle_exit and kvm_vcpu_run,
>> so we move it to a new function kvm_pre_enter_guest.
>> 5. Change the RESUME_HOST, RESUME_GUEST value, return 1 for resume guest
>> and "<= 0" for resume host.
>> 6. Fcsr and fpu registers are saved/restored together.
>>
>> Changes for v2:
>> 1. Seprate the original patch-01 and patch-03 into small patches, and the
>> patches mainly contain kvm module init, module exit, vcpu create, vcpu run,
>> etc.
>> 2. Remove the original KVM_{GET,SET}_CSRS ioctl in the kvm uapi header,
>> and we use the common KVM_{GET,SET}_ONE_REG to access register.
>> 3. Use BIT(x) to replace the "1 << n_bits" statement.
>>
>> Tianrui Zhao (29):
>>    LoongArch: KVM: Add kvm related header files
>>    LoongArch: KVM: Implement kvm module related interface
>>    LoongArch: KVM: Implement kvm hardware enable, disable interface
>>    LoongArch: KVM: Implement VM related functions
>>    LoongArch: KVM: Add vcpu related header files
>>    LoongArch: KVM: Implement vcpu create and destroy interface
>>    LoongArch: KVM: Implement vcpu run interface
>>    LoongArch: KVM: Implement vcpu handle exit interface
>>    LoongArch: KVM: Implement vcpu get, vcpu set registers
>>    LoongArch: KVM: Implement vcpu ENABLE_CAP ioctl interface
>>    LoongArch: KVM: Implement fpu related operations for vcpu
>>    LoongArch: KVM: Implement vcpu interrupt operations
>>    LoongArch: KVM: Implement misc vcpu related interfaces
>>    LoongArch: KVM: Implement vcpu load and vcpu put operations
>>    LoongArch: KVM: Implement vcpu status description
>>    LoongArch: KVM: Implement virtual machine tlb operations
>>    LoongArch: KVM: Implement vcpu timer operations
>>    LoongArch: KVM: Implement kvm mmu operations
>>    LoongArch: KVM: Implement handle csr exception
>>    LoongArch: KVM: Implement handle iocsr exception
>>    LoongArch: KVM: Implement handle idle exception
>>    LoongArch: KVM: Implement handle gspr exception
>>    LoongArch: KVM: Implement handle mmio exception
>>    LoongArch: KVM: Implement handle fpu exception
>>    LoongArch: KVM: Implement kvm exception vector
>>    LoongArch: KVM: Implement vcpu world switch
>>    LoongArch: KVM: Enable kvm config and add the makefile
>>    LoongArch: KVM: Supplement kvm document about LoongArch-specific part
>>    LoongArch: KVM: Add maintainers for LoongArch KVM
>>
>>   Documentation/virt/kvm/api.rst             |  70 +-
>>   MAINTAINERS                                |  12 +
>>   arch/loongarch/Kbuild                      |   1 +
>>   arch/loongarch/Kconfig                     |   3 +
>>   arch/loongarch/configs/loongson3_defconfig |   2 +
>>   arch/loongarch/include/asm/inst.h          |  16 +
>>   arch/loongarch/include/asm/kvm_csr.h       | 221 +++++
>>   arch/loongarch/include/asm/kvm_host.h      | 245 ++++++
>>   arch/loongarch/include/asm/kvm_mmu.h       | 138 +++
>>   arch/loongarch/include/asm/kvm_types.h     |  11 +
>>   arch/loongarch/include/asm/kvm_vcpu.h      | 107 +++
>>   arch/loongarch/include/asm/loongarch.h     |  19 +-
>>   arch/loongarch/include/uapi/asm/kvm.h      | 108 +++
>>   arch/loongarch/kernel/asm-offsets.c        |  32 +
>>   arch/loongarch/kvm/Kconfig                 |  45 +
>>   arch/loongarch/kvm/Makefile                |  20 +
>>   arch/loongarch/kvm/exit.c                  | 711 ++++++++++++++++
>>   arch/loongarch/kvm/interrupt.c             | 185 ++++
>>   arch/loongarch/kvm/main.c                  | 429 ++++++++++
>>   arch/loongarch/kvm/mmu.c                   | 922 ++++++++++++++++++++
>>   arch/loongarch/kvm/switch.S                | 255 ++++++
>>   arch/loongarch/kvm/timer.c                 | 200 +++++
>>   arch/loongarch/kvm/tlb.c                   |  34 +
>>   arch/loongarch/kvm/trace.h                 | 166 ++++
>>   arch/loongarch/kvm/vcpu.c                  | 940 +++++++++++++++++++++
>>   arch/loongarch/kvm/vm.c                    |  92 ++
>>   include/uapi/linux/kvm.h                   |   9 +
>>   27 files changed, 4979 insertions(+), 14 deletions(-)
>>   create mode 100644 arch/loongarch/include/asm/kvm_csr.h
>>   create mode 100644 arch/loongarch/include/asm/kvm_host.h
>>   create mode 100644 arch/loongarch/include/asm/kvm_mmu.h
>>   create mode 100644 arch/loongarch/include/asm/kvm_types.h
>>   create mode 100644 arch/loongarch/include/asm/kvm_vcpu.h
>>   create mode 100644 arch/loongarch/include/uapi/asm/kvm.h
>>   create mode 100644 arch/loongarch/kvm/Kconfig
>>   create mode 100644 arch/loongarch/kvm/Makefile
>>   create mode 100644 arch/loongarch/kvm/exit.c
>>   create mode 100644 arch/loongarch/kvm/interrupt.c
>>   create mode 100644 arch/loongarch/kvm/main.c
>>   create mode 100644 arch/loongarch/kvm/mmu.c
>>   create mode 100644 arch/loongarch/kvm/switch.S
>>   create mode 100644 arch/loongarch/kvm/timer.c
>>   create mode 100644 arch/loongarch/kvm/tlb.c
>>   create mode 100644 arch/loongarch/kvm/trace.h
>>   create mode 100644 arch/loongarch/kvm/vcpu.c
>>   create mode 100644 arch/loongarch/kvm/vm.c
>>
>> --
>> 2.39.1
>>

Powered by blists - more mailing lists