linux-kernel - Re: [PATCH v11 10/13] usb: dwc3: qcom: Add multiport suspend/resume support for wrapper

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <825bc60b-2067-43e2-8b43-9d38b7cebf02@linaro.org>
Date:   Fri, 15 Sep 2023 15:48:21 +0200
From:   Konrad Dybcio <konrad.dybcio@...aro.org>
To:     Krishna Kurapati <quic_kriskura@...cinc.com>,
        Thinh Nguyen <Thinh.Nguyen@...opsys.com>,
        Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
        Philipp Zabel <p.zabel@...gutronix.de>,
        Andy Gross <agross@...nel.org>,
        Bjorn Andersson <andersson@...nel.org>,
        Rob Herring <robh+dt@...nel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
        Felipe Balbi <balbi@...nel.org>,
        Wesley Cheng <quic_wcheng@...cinc.com>,
        Johan Hovold <johan@...nel.org>,
        Mathias Nyman <mathias.nyman@...el.com>
Cc:     linux-usb@...r.kernel.org, linux-kernel@...r.kernel.org,
        linux-arm-msm@...r.kernel.org, devicetree@...r.kernel.org,
        quic_pkondeti@...cinc.com, quic_ppratap@...cinc.com,
        quic_jackp@...cinc.com, ahalaney@...hat.com,
        quic_shazhuss@...cinc.com
Subject: Re: [PATCH v11 10/13] usb: dwc3: qcom: Add multiport suspend/resume
 support for wrapper

On 28.08.2023 15:30, Krishna Kurapati wrote:
> QCOM SoC SA8295P's tertiary quad port controller supports 2 HS+SS
> ports and 2 HS only ports. Add support for configuring PWR_EVENT_IRQ's
> for all the ports during suspend/resume.
> 
> Signed-off-by: Krishna Kurapati <quic_kriskura@...cinc.com>
> ---
>  drivers/usb/dwc3/dwc3-qcom.c | 39 +++++++++++++++++++++++++++++-------
>  1 file changed, 32 insertions(+), 7 deletions(-)
> 
> diff --git a/drivers/usb/dwc3/dwc3-qcom.c b/drivers/usb/dwc3/dwc3-qcom.c
> index f8f8c5e39a01..34eeebb74a6a 100644
> --- a/drivers/usb/dwc3/dwc3-qcom.c
> +++ b/drivers/usb/dwc3/dwc3-qcom.c
> @@ -37,7 +37,11 @@
>  #define PIPE3_PHYSTATUS_SW			BIT(3)
>  #define PIPE_UTMI_CLK_DIS			BIT(8)
>  
> -#define PWR_EVNT_IRQ_STAT_REG			0x58
> +#define PWR_EVNT_IRQ1_STAT_REG			0x58
> +#define PWR_EVNT_IRQ2_STAT_REG			0x1dc
> +#define PWR_EVNT_IRQ3_STAT_REG			0x228
> +#define PWR_EVNT_IRQ4_STAT_REG			0x238
> +
>  #define PWR_EVNT_LPM_IN_L2_MASK			BIT(4)
>  #define PWR_EVNT_LPM_OUT_L2_MASK		BIT(5)
>  
> @@ -107,6 +111,19 @@ struct dwc3_qcom {
>  	int			num_ports;
>  };
>  
> +/*
> + * SA8295 has 4 power event IRQ STAT registers to be checked
> + * during suspend resume.
> + */
But this driver supports much more than just SA8295?

> +#define NUM_PWR_EVENT_STAT_REGS	4
> +
> +static u32 pwr_evnt_irq_stat_reg_offset[NUM_PWR_EVENT_STAT_REGS] = {
> +	PWR_EVNT_IRQ1_STAT_REG,
> +	PWR_EVNT_IRQ2_STAT_REG,
> +	PWR_EVNT_IRQ3_STAT_REG,
> +	PWR_EVNT_IRQ4_STAT_REG,
> +};
> +
>  static inline void dwc3_qcom_setbits(void __iomem *base, u32 offset, u32 val)
>  {
>  	u32 reg;
> @@ -440,15 +457,19 @@ static void dwc3_qcom_enable_interrupts(struct dwc3_qcom *qcom)
>  
>  static int dwc3_qcom_suspend(struct dwc3_qcom *qcom, bool wakeup)
>  {
> +	u8 num_ports;
Maybe I'm picky, but I'm not sure defining a variable for
a single use of an object with a rather short name
(qcom->num_ports) is justified, here and below..

Konrad