Message-ID: <dde3cb9dc2fb26db9d5508c11c6d9dee1505b0df.camel@infradead.org>
Date:   Mon, 18 Sep 2023 17:07:26 +0100
From:   David Woodhouse <dwmw2@...radead.org>
To:     Paul Durrant <paul@....org>, kvm@...r.kernel.org,
        linux-kernel@...r.kernel.org
Cc:     Paul Durrant <pdurrant@...zon.com>,
        Sean Christopherson <seanjc@...gle.com>,
        Paolo Bonzini <pbonzini@...hat.com>,
        Thomas Gleixner <tglx@...utronix.de>,
        Ingo Molnar <mingo@...hat.com>, Borislav Petkov <bp@...en8.de>,
        Dave Hansen <dave.hansen@...ux.intel.com>,
        "H. Peter Anvin" <hpa@...or.com>, x86@...nel.org
Subject: Re: [PATCH v3 09/13] KVM: xen: automatically use the vcpu_info
 embedded in shared_info

On Mon, 2023-09-18 at 14:41 +0000, Paul Durrant wrote:
> From: Paul Durrant <pdurrant@...zon.com>
> 
> The VMM should only need to set the KVM_XEN_VCPU_ATTR_TYPE_VCPU_INFO
> attribute in response to a VCPUOP_register_vcpu_info hypercall. We can
> handle the default case internally since we already know where the
> shared_info page is. Modify get_vcpu_info_cache() to pass back a pointer
> to the shared info pfn cache (and appropriate offset) for any of the
> first 32 vCPUs if the attribute has not been set.
> 
> A VMM will be able to determine whether it needs to set up default
> vcpu_info using the previously defined KVM_XEN_HVM_CONFIG_SHARED_INFO_HVA
> Xen capability flag, which will be advertized in a subsequent patch.
> 
> Also update the KVM API documentation to describe the new behaviour.
> 
> Signed-off-by: Paul Durrant <pdurrant@...zon.com>
> ---
> Cc: Sean Christopherson <seanjc@...gle.com>
> Cc: Paolo Bonzini <pbonzini@...hat.com>
> Cc: Thomas Gleixner <tglx@...utronix.de>
> Cc: Ingo Molnar <mingo@...hat.com>
> Cc: Borislav Petkov <bp@...en8.de>
> Cc: Dave Hansen <dave.hansen@...ux.intel.com>
> Cc: "H. Peter Anvin" <hpa@...or.com>
> Cc: David Woodhouse <dwmw2@...radead.org>
> Cc: x86@...nel.org
> 
> v3:
>  - Add a note to the API documentation discussing vcpu_info copying.
> 
> v2:
>  - Dispense with the KVM_XEN_HVM_CONFIG_DEFAULT_VCPU_INFO capability.
>  - Add API documentation.
> ---
>  Documentation/virt/kvm/api.rst | 22 +++++++++++++++-------
>  arch/x86/kvm/xen.c             | 15 +++++++++++++++
>  2 files changed, 30 insertions(+), 7 deletions(-)
> 
> diff --git a/Documentation/virt/kvm/api.rst b/Documentation/virt/kvm/api.rst
> index e9df4df6fe48..47bf3db74674 100644
> --- a/Documentation/virt/kvm/api.rst
> +++ b/Documentation/virt/kvm/api.rst
> @@ -5442,13 +5442,7 @@ KVM_XEN_ATTR_TYPE_LONG_MODE
>  
>  KVM_XEN_ATTR_TYPE_SHARED_INFO
>    Sets the guest physical frame number at which the Xen shared_info
> -  page resides. Note that although Xen places vcpu_info for the first
> -  32 vCPUs in the shared_info page, KVM does not automatically do so
> -  and instead requires that KVM_XEN_VCPU_ATTR_TYPE_VCPU_INFO be used
> -  explicitly even when the vcpu_info for a given vCPU resides at the
> -  "default" location in the shared_info page. This is because KVM may
> -  not be aware of the Xen CPU id which is used as the index into the
> -  vcpu_info[] array, so may know the correct default location.
> +  page resides.
>  
>    Note that the shared_info page may be constantly written to by KVM;
>    it contains the event channel bitmap used to deliver interrupts to
> @@ -5564,12 +5558,26 @@ type values:
>  
>  KVM_XEN_VCPU_ATTR_TYPE_VCPU_INFO
>    Sets the guest physical address of the vcpu_info for a given vCPU.
> +  The vcpu_info for the first 32 vCPUs defaults to the structures
> +  embedded in the shared_info page.

The above is true only if KVM has KVM_XEN_HVM_CONFIG_SHARED_INFO_HVA.
You kind of touch on that next, but perhaps the 'if the KVM_...'
condition should be moved up?

> +  If the KVM_XEN_HVM_CONFIG_SHARED_INFO_HVA flag is also set in the
> +  Xen capabilities then the VMM is not required to set this default
> +  location; KVM will handle that internally. Otherwise this attribute
> +  must be set for all vCPUs.
> +
>    As with the shared_info page for the VM, the corresponding page may be
>    dirtied at any time if event channel interrupt delivery is enabled, so
>    userspace should always assume that the page is dirty without relying
>    on dirty logging. Setting the gpa to KVM_XEN_INVALID_GPA will disable
>    the vcpu_info.
>  
> +  Note that, if the guest sets an explicit vcpu_info location in guest
> +  memory then the VMM is expected to copy the content of the structure
> +  embedded in the shared_info page to the new location. It is therefore
> +  important that no event delivery is in progress at this time, otherwise
> +  events may be missed.
> 

That's difficult. It means tearing down all interrupts from passthrough
devices which are mapped via PIRQs, and also all IPIs. 

The IPI code *should* be able to fall back to just letting the VMM
handle the hypercall in userspace. But PIRQs are harder. I'd be happier
if our plan — handwavy though it may be — led to being able to use the
existing slow path for delivering interrupts by just *invalidating* the
cache. Maybe we *should* move the memcpy into the kernel, and let it
lock *both* the shinfo and new vcpu_info caches while it's doing the
copy? Given that that's the only valid transition, that shouldn't be so
hard, should it?

>  KVM_XEN_VCPU_ATTR_TYPE_VCPU_TIME_INFO
>    Sets the guest physical address of an additional pvclock structure
>    for a given vCPU. This is typically used for guest vsyscall support.
> diff --git a/arch/x86/kvm/xen.c b/arch/x86/kvm/xen.c
> index 459f3ca4710e..660a808c0b50 100644
> --- a/arch/x86/kvm/xen.c
> +++ b/arch/x86/kvm/xen.c
> @@ -491,6 +491,21 @@ static void kvm_xen_inject_vcpu_vector(struct kvm_vcpu *v)
>  
>  static struct gfn_to_pfn_cache *get_vcpu_info_cache(struct kvm_vcpu *v, unsigned long *offset)
>  {
> +       if (!v->arch.xen.vcpu_info_cache.active && v->arch.xen.vcpu_id < MAX_VIRT_CPUS) {
> +               struct kvm *kvm = v->kvm;
> +
> +               if (offset) {
> +                       if (IS_ENABLED(CONFIG_64BIT) && kvm->arch.xen.long_mode)
> +                               *offset = offsetof(struct shared_info,
> +                                                  vcpu_info[v->arch.xen.vcpu_id]);
> +                       else
> +                               *offset = offsetof(struct compat_shared_info,
> +                                                  vcpu_info[v->arch.xen.vcpu_id]);
> +               }
> +
> +               return &kvm->arch.xen.shinfo_cache;
> +       }
> +
>         if (offset)
>                 *offset = 0;
>  


Download attachment "smime.p7s" of type "application/pkcs7-signature" (5965 bytes)

Powered by blists - more mailing lists