linux-kernel - Re: [PATCH v2 3/3] gnss: ubx: add support for the reset gpio

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [day] [month] [year] [list]

Message-ID: <CAMuHMdWpD-NOrH=X-G8sOp1uG3-XsSghJfyutmO+xdArfCXFAA@mail.gmail.com>
Date:   Tue, 19 Sep 2023 11:59:48 +0200
From:   Geert Uytterhoeven <geert@...ux-m68k.org>
To:     Wolfram Sang <wsa+renesas@...g-engineering.com>
Cc:     linux-renesas-soc@...r.kernel.org, Johan Hovold <johan@...nel.org>,
        linux-kernel@...r.kernel.org
Subject: Re: [PATCH v2 3/3] gnss: ubx: add support for the reset gpio

On Sat, Aug 19, 2023 at 10:56 PM Wolfram Sang
<wsa+renesas@...g-engineering.com> wrote:
> Tested with a Renesas KingFisher board. Because my GNSS device is hooked
> up via UART and I2C simultaneously, I could verify functionality by
> opening/closing the GNSS device using UART and see if the corresponding
> I2C device was visible on the bus.
>
> Signed-off-by: Wolfram Sang <wsa+renesas@...g-engineering.com>
> ---
>
> Changes since v1:
> * proper reverse order in ubx_set_standby (Thanks, Geert!)
> * simplified the comment when initiall asserting the GPIO (Thanks, Geert!)

Reviewed-by: Geert Uytterhoeven <geert+renesas@...der.be>

Gr{oetje,eeting}s,

                        Geert

-- 
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@...ux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds