[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <ZQsLgnNnBP3SVDXy@primary>
Date: Wed, 20 Sep 2023 11:10:58 -0400
From: Abdel Alkuor <alkuor@...il.com>
To: Heikki Krogerus <heikki.krogerus@...ux.intel.com>
Cc: krzysztof.kozlowski+dt@...aro.org, bryan.odonoghue@...aro.org,
gregkh@...uxfoundation.org, robh+dt@...nel.org,
linux-usb@...r.kernel.org, devicetree@...r.kernel.org,
conor+dt@...nel.org, linux-kernel@...r.kernel.org,
abdelalkuor@...tab.com
Subject: Re: [PATCH v5 15/15] USB: typec: Do not check VID for tps25750
On Mon, Sep 18, 2023 at 04:29:43PM +0300, Heikki Krogerus wrote:
> Hi,
>
> On Sun, Sep 17, 2023 at 11:26:39AM -0400, Abdel Alkuor wrote:
> > From: Abdel Alkuor <abdelalkuor@...tab.com>
> >
> > tps25750 doesn't have VID register, check VID for PD controllers
> > other than tps25750
> >
> > Signed-off-by: Abdel Alkuor <abdelalkuor@...tab.com>
> > ---
> > drivers/usb/typec/tipd/core.c | 10 ++++++----
> > 1 file changed, 6 insertions(+), 4 deletions(-)
> >
> > diff --git a/drivers/usb/typec/tipd/core.c b/drivers/usb/typec/tipd/core.c
> > index 326c23bfa8e6..c1399e12a170 100644
> > --- a/drivers/usb/typec/tipd/core.c
> > +++ b/drivers/usb/typec/tipd/core.c
> > @@ -1142,10 +1142,6 @@ static int tps6598x_probe(struct i2c_client *client)
> > if (IS_ERR(tps->regmap))
> > return PTR_ERR(tps->regmap);
> >
> > - ret = tps6598x_read32(tps, TPS_REG_VID, &vid);
> > - if (ret < 0 || !vid)
> > - return -ENODEV;
> > -
> > /*
> > * Checking can the adapter handle SMBus protocol. If it can not, the
> > * driver needs to take care of block reads separately.
> > @@ -1176,6 +1172,12 @@ static int tps6598x_probe(struct i2c_client *client)
> >
> > tps->irq_handler = irq_handler;
> >
> > + if (!tps->is_tps25750) {
> > + ret = tps6598x_read32(tps, TPS_REG_VID, &vid);
> > + if (ret < 0 || !vid)
> > + return -ENODEV;
> > + }
>
> You need to do this at the same time you enable tps25750, so I'm
> guessing in patch 4.
>
> You are also changing the execution order just because of that
> is_tps25750. Instead you need to make sure you have that flag set as
> soon as possible in the first place, so right after "tps" is
> allocated:
>
Good point. I will move the check in patch 4 and check it after allocating
tps.
> mutex_init(&tps->lock);
> tps->dev = &client->dev;
> + tps->is_tps25750 = of_device_is_compatible(np, "ti,tps25750");
>
> tps->regmap = devm_regmap_init_i2c(client, &tps6598x_regmap_config);
> if (IS_ERR(tps->regmap))
>
>
> thanks,
>
> --
> heikki
Thanks,
Abdel
Powered by blists - more mailing lists