| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20230920152015.1376838-5-hugo@hugovil.com>
Date: Wed, 20 Sep 2023 11:20:15 -0400
From: Hugo Villeneuve <hugo@...ovil.com>
To: gregkh@...uxfoundation.org, jirislaby@...nel.org,
robh+dt@...nel.org, krzysztof.kozlowski+dt@...aro.org,
conor+dt@...nel.org, hvilleneuve@...onoff.com
Cc: linux-kernel@...r.kernel.org, linux-serial@...r.kernel.org,
devicetree@...r.kernel.org, hugo@...ovil.com
Subject: [PATCH 4/4] dt-bindings: sc16is7xx: convert to YAML
From: Hugo Villeneuve <hvilleneuve@...onoff.com>
Convert binding from text format to YAML.
Additions to original text binding:
- add rs485 reference.
Signed-off-by: Hugo Villeneuve <hvilleneuve@...onoff.com>
---
.../bindings/serial/nxp,sc16is7xx.txt | 118 ----------------
.../bindings/serial/nxp,sc16is7xx.yaml | 126 ++++++++++++++++++
2 files changed, 126 insertions(+), 118 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/serial/nxp,sc16is7xx.txt
create mode 100644 Documentation/devicetree/bindings/serial/nxp,sc16is7xx.yaml
diff --git a/Documentation/devicetree/bindings/serial/nxp,sc16is7xx.txt b/Documentation/devicetree/bindings/serial/nxp,sc16is7xx.txt
deleted file mode 100644
index d89815c5c562..000000000000
--- a/Documentation/devicetree/bindings/serial/nxp,sc16is7xx.txt
+++ /dev/null
@@ -1,118 +0,0 @@
-* NXP SC16IS7xx advanced Universal Asynchronous Receiver-Transmitter (UART)
-* i2c as bus
-
-Required properties:
-- compatible: Should be one of the following:
- - "nxp,sc16is740" for NXP SC16IS740,
- - "nxp,sc16is741" for NXP SC16IS741,
- - "nxp,sc16is750" for NXP SC16IS750,
- - "nxp,sc16is752" for NXP SC16IS752,
- - "nxp,sc16is760" for NXP SC16IS760,
- - "nxp,sc16is762" for NXP SC16IS762.
-- reg: I2C address of the SC16IS7xx device.
-- interrupts: Should contain the UART interrupt
-- clocks: Reference to the IC source clock.
- OR (when there is no clock provider visible to the platform)
-- clock-frequency: The source clock frequency for the IC.
-
-Optional properties:
-- gpio-controller: Marks the device node as a GPIO controller.
-- #gpio-cells: Should be two. The first cell is the GPIO number and
- the second cell is used to specify the GPIO polarity:
- 0 = active high,
- 1 = active low.
-- nxp,irda-mode-ports: An array that lists the indices of the port that
- should operate in IrDA mode.
-- nxp,modem-control-line-ports: An array that lists the indices of the port that
- should have shared GPIO lines configured as
- modem control lines.
-
-Example:
- sc16is750: sc16is750@51 {
- compatible = "nxp,sc16is750";
- reg = <0x51>;
- clocks = <&clk20m>;
- interrupt-parent = <&gpio3>;
- interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
- gpio-controller;
- #gpio-cells = <2>;
- };
-
- sc16is752: sc16is752@53 {
- compatible = "nxp,sc16is752";
- reg = <0x53>;
- clocks = <&clk20m>;
- interrupt-parent = <&gpio3>;
- interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
- nxp,modem-control-line-ports = <1>; /* Port 1 as modem control lines */
- gpio-controller; /* Port 0 as GPIOs */
- #gpio-cells = <2>;
- };
-
- sc16is752: sc16is752@54 {
- compatible = "nxp,sc16is752";
- reg = <0x54>;
- clocks = <&clk20m>;
- interrupt-parent = <&gpio3>;
- interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
- nxp,modem-control-line-ports = <0 1>; /* Ports 0 and 1 as modem control lines */
- };
-
-* spi as bus
-
-Required properties:
-- compatible: Should be one of the following:
- - "nxp,sc16is740" for NXP SC16IS740,
- - "nxp,sc16is741" for NXP SC16IS741,
- - "nxp,sc16is750" for NXP SC16IS750,
- - "nxp,sc16is752" for NXP SC16IS752,
- - "nxp,sc16is760" for NXP SC16IS760,
- - "nxp,sc16is762" for NXP SC16IS762.
-- reg: SPI chip select number.
-- interrupts: Specifies the interrupt source of the parent interrupt
- controller. The format of the interrupt specifier depends on the
- parent interrupt controller.
-- clocks: phandle to the IC source clock.
-
-Optional properties:
-- gpio-controller: Marks the device node as a GPIO controller.
-- #gpio-cells: Should be two. The first cell is the GPIO number and
- the second cell is used to specify the GPIO polarity:
- 0 = active high,
- 1 = active low.
-- nxp,irda-mode-ports: An array that lists the indices of the port that
- should operate in IrDA mode.
-- nxp,modem-control-line-ports: An array that lists the indices of the port that
- should have shared GPIO lines configured as
- modem control lines.
-
-Example:
- sc16is750: sc16is750@0 {
- compatible = "nxp,sc16is750";
- reg = <0>;
- clocks = <&clk20m>;
- interrupt-parent = <&gpio3>;
- interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
- gpio-controller;
- #gpio-cells = <2>;
- };
-
- sc16is752: sc16is752@1 {
- compatible = "nxp,sc16is752";
- reg = <1>;
- clocks = <&clk20m>;
- interrupt-parent = <&gpio3>;
- interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
- nxp,modem-control-line-ports = <1>; /* Port 1 as modem control lines */
- gpio-controller; /* Port 0 as GPIOs */
- #gpio-cells = <2>;
- };
-
- sc16is752: sc16is752@2 {
- compatible = "nxp,sc16is752";
- reg = <2>;
- clocks = <&clk20m>;
- interrupt-parent = <&gpio3>;
- interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
- nxp,modem-control-line-ports = <0 1>; /* Ports 0 and 1 as modem control lines */
- };
diff --git a/Documentation/devicetree/bindings/serial/nxp,sc16is7xx.yaml b/Documentation/devicetree/bindings/serial/nxp,sc16is7xx.yaml
new file mode 100644
index 000000000000..508639e09e06
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/nxp,sc16is7xx.yaml
@@ -0,0 +1,126 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/serial/nxp,sc16is7xx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP SC16IS7xx advanced Universal Asynchronous Receiver-Transmitter (UART)
+
+maintainers:
+ - Hugo Villeneuve <hvilleneuve@...onoff.com>
+
+properties:
+ compatible:
+ enum:
+ - nxp,sc16is740
+ - nxp,sc16is741
+ - nxp,sc16is750
+ - nxp,sc16is752
+ - nxp,sc16is760
+ - nxp,sc16is762
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+ description: Reference to the IC source clock.
+
+ clock-frequency:
+ description: |
+ When there is no clock provider visible to the platform, this
+ is the source crystal or external clock frequency for the IC in Hz.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 1
+ maximum: 80000000
+
+ gpio-controller:
+ description: Marks the device node as a GPIO controller.
+ type: boolean
+
+ "#gpio-cells":
+ const: 2
+
+ gpio-line-names:
+ minItems: 1
+ maxItems: 8
+
+ nxp,irda-mode-ports:
+ description: |
+ An array that lists the indices of the port that should operate in IrDA
+ mode:
+ 0: port A
+ 1: port B
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ minItems: 1
+ maxItems: 2
+ items:
+ minimum: 0
+ maximum: 1
+
+ nxp,modem-control-line-ports:
+ description: |
+ An array that lists the indices of the port that should have shared GPIO
+ lines configured as modem control lines:
+ 0: port A
+ 1: port B
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ minItems: 1
+ maxItems: 2
+ items:
+ minimum: 0
+ maximum: 1
+
+allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+ - $ref: /schemas/serial/serial.yaml#
+ - $ref: /schemas/serial/rs485.yaml#
+
+required:
+ - compatible
+ - reg
+ - interrupts
+
+oneOf:
+ - required:
+ - clocks
+ - required:
+ - clock-frequency
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+ serial0: serial@51 {
+ compatible = "nxp,sc16is750";
+ reg = <0x51>;
+ clocks = <&clk20m>;
+ interrupt-parent = <&gpio3>;
+ interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ serial1: serial@53 {
+ compatible = "nxp,sc16is752";
+ reg = <0x53>;
+ clocks = <&clk20m>;
+ interrupt-parent = <&gpio3>;
+ interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
+ nxp,modem-control-line-ports = <1>; /* Port 1 as modem control lines */
+ gpio-controller; /* Port 0 as GPIOs */
+ #gpio-cells = <2>;
+ };
+
+ serial2: serial@54 {
+ compatible = "nxp,sc16is752";
+ reg = <0x54>;
+ clocks = <&clk20m>;
+ interrupt-parent = <&gpio3>;
+ interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
+ nxp,modem-control-line-ports = <0 1>; /* Ports 0 and 1 as modem control lines */
+ };
--
2.30.2
Powered by blists - more mailing lists