[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20230920191059.28395-19-fancer.lancer@gmail.com>
Date: Wed, 20 Sep 2023 22:10:42 +0300
From: Serge Semin <fancer.lancer@...il.com>
To: Michal Simek <michal.simek@....com>,
Alexander Stein <alexander.stein@...tq-group.com>,
Borislav Petkov <bp@...en8.de>,
Tony Luck <tony.luck@...el.com>,
James Morse <james.morse@....com>,
Mauro Carvalho Chehab <mchehab@...nel.org>,
Robert Richter <rric@...nel.org>
Cc: Serge Semin <fancer.lancer@...il.com>,
Punnaiah Choudary Kalluri
<punnaiah.choudary.kalluri@...inx.com>,
Dinh Nguyen <dinguyen@...nel.org>,
Arnd Bergmann <arnd@...db.de>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
linux-arm-kernel@...ts.infradead.org, linux-edac@...r.kernel.org,
linux-kernel@...r.kernel.org
Subject: [PATCH v4 18/20] EDAC/synopsys: Unify CSRs macro declarations
Originally the device CSR macros were supposed to be defined following the
next local convention: first CSR offsets are listed, then their fields and
flags are described in the same order; CSRs offset macros are supposed to
have _OFST suffix; ECC-related macros shall have ECC_ prefix, generic
DDR-related macros - DDR_ prefix. After all the years the driver has been
living in kernel the CSRs macros have turned to be partly deviated away
from the denoted convention. Fix all the related inconsistencies: move
several CSRs offset macros to be defined before the CSRs fields and flags
macros; replace OFFSET suffix with OFST; replace DDRC_ prefix with DDR_
and ECC_ with DDR_ where it's appropriate; group DDR_MSTR and ECC_CTRL
(ECC_CLR) sibling fields macros together and make sure their prefixes
match to the CSRs offset macros. In addition to that drop _MASK suffix
from the macros which aren't used as masks and add ZYNQMP_ prefix to the
ZYNQMP-specific macros to distinguish them from the generic Synopsys
memory controller macros.
Signed-off-by: Serge Semin <fancer.lancer@...il.com>
---
Changelog v4:
- This is a new patch collected from the rest of the series to simplify
the review process.
---
drivers/edac/synopsys_edac.c | 134 +++++++++++++++++------------------
1 file changed, 66 insertions(+), 68 deletions(-)
diff --git a/drivers/edac/synopsys_edac.c b/drivers/edac/synopsys_edac.c
index 655a32792883..315eebe52923 100644
--- a/drivers/edac/synopsys_edac.c
+++ b/drivers/edac/synopsys_edac.c
@@ -78,20 +78,34 @@
#define ECC_POISON0_OFST 0xB8
#define ECC_POISON1_OFST 0xBC
-#define ECC_ADDRMAP0_OFFSET 0x200
-
-/* Control register bitfield definitions */
-#define ECC_CTRL_CLR_CE_ERR BIT(0)
-#define ECC_CTRL_CLR_UE_ERR BIT(1)
-#define ECC_CTRL_CLR_CE_ERRCNT BIT(2)
-#define ECC_CTRL_CLR_UE_ERRCNT BIT(3)
-
-/* DDR Control Register width definitions */
+/* DDR Address Map Registers */
+#define DDR_ADDRMAP0_OFST 0x200
+
+/* DDR Software Control Register */
+#define DDR_SWCTL 0x320
+
+/* ZynqMP DDR QOS Registers */
+#define ZYNQMP_DDR_QOS_IRQ_STAT_OFST 0x20200
+#define ZYNQMP_DDR_QOS_IRQ_EN_OFST 0x20208
+#define ZYNQMP_DDR_QOS_IRQ_DB_OFST 0x2020C
+
+/* DDR Master register definitions */
+#define DDR_MSTR_DEV_CFG_MASK 0xC0000000
+#define DDR_MSTR_DEV_CFG_SHIFT 30
+#define DDR_MSTR_DEV_X4 0
+#define DDR_MSTR_DEV_X8 1
+#define DDR_MSTR_DEV_X16 2
+#define DDR_MSTR_DEV_X32 3
#define DDR_MSTR_BUSWIDTH_MASK 0x3000
#define DDR_MSTR_BUSWIDTH_SHIFT 12
-#define DDRCTL_EWDTH_16 2
-#define DDRCTL_EWDTH_32 1
-#define DDRCTL_EWDTH_64 0
+#define DDR_MSTR_BUSWIDTH_16 2
+#define DDR_MSTR_BUSWIDTH_32 1
+#define DDR_MSTR_BUSWIDTH_64 0
+#define DDR_MSTR_MEM_LPDDR4 0x20
+#define DDR_MSTR_MEM_DDR4 0x10
+#define DDR_MSTR_MEM_LPDDR3 0x8
+#define DDR_MSTR_MEM_DDR2 0x4
+#define DDR_MSTR_MEM_DDR3 0x1
/* ECC CFG0 register definitions */
#define ECC_CFG0_MODE_MASK 0x7
@@ -104,23 +118,19 @@
#define ECC_STAT_CECNT_SHIFT 8
#define ECC_STAT_BITNUM_MASK 0x7F
+/* ECC control/clear register definitions */
+#define ECC_CTRL_CLR_CE_ERR BIT(0)
+#define ECC_CTRL_CLR_UE_ERR BIT(1)
+#define ECC_CTRL_CLR_CE_ERRCNT BIT(2)
+#define ECC_CTRL_CLR_UE_ERRCNT BIT(3)
+#define ECC_CTRL_EN_CE_IRQ BIT(8)
+#define ECC_CTRL_EN_UE_IRQ BIT(9)
+
/* ECC error count register definitions */
#define ECC_ERRCNT_UECNT_MASK 0xFFFF0000
#define ECC_ERRCNT_UECNT_SHIFT 16
#define ECC_ERRCNT_CECNT_MASK 0xFFFF
-/* DDR QOS Interrupt register definitions */
-#define DDR_QOS_IRQ_STAT_OFST 0x20200
-#define DDR_QOSUE_MASK 0x4
-#define DDR_QOSCE_MASK 0x2
-#define ECC_CE_UE_INTR_MASK 0x6
-#define DDR_QOS_IRQ_EN_OFST 0x20208
-#define DDR_QOS_IRQ_DB_OFST 0x2020C
-
-/* DDR QOS Interrupt register definitions */
-#define DDR_UE_MASK BIT(9)
-#define DDR_CE_MASK BIT(8)
-
/* ECC Corrected Error Register Mask and Shifts*/
#define ECC_CEADDR0_RW_MASK 0x3FFFF
#define ECC_CEADDR0_RNK_MASK BIT(24)
@@ -142,28 +152,11 @@
#define ECC_POISON1_ROW_SHIFT 0
#define ECC_POISON1_ROW_MASK 0x3FFFF
-/* DDR Memory type defines */
-#define MEM_TYPE_DDR3 0x1
-#define MEM_TYPE_LPDDR3 0x8
-#define MEM_TYPE_DDR2 0x4
-#define MEM_TYPE_DDR4 0x10
-#define MEM_TYPE_LPDDR4 0x20
-
-/* DDRC Software control register */
-#define DDRC_SWCTL 0x320
-
/* DDRC ECC CE & UE poison mask */
#define ECC_CEPOISON_MASK 0x3
#define ECC_UEPOISON_MASK 0x1
-/* DDRC Device config masks */
-#define DDRC_MSTR_CFG_MASK 0xC0000000
-#define DDRC_MSTR_CFG_SHIFT 30
-#define DDRC_MSTR_CFG_X4_MASK 0x0
-#define DDRC_MSTR_CFG_X8_MASK 0x1
-#define DDRC_MSTR_CFG_X16_MASK 0x2
-#define DDRC_MSTR_CFG_X32_MASK 0x3
-
+/* DDRC Device config shifts/masks */
#define DDR_MAX_ROW_SHIFT 18
#define DDR_MAX_COL_SHIFT 14
#define DDR_MAX_BANK_SHIFT 3
@@ -216,6 +209,11 @@
#define RANK_B0_BASE 6
+/* ZynqMP DDR QOS Interrupt register definitions */
+#define ZYNQMP_DDR_QOS_UE_MASK 0x4
+#define ZYNQMP_DDR_QOS_CE_MASK 0x2
+#define ZYNQMP_DDR_QOS_IRQ_MASK 0x6
+
/**
* struct ecc_error_info - ECC error log information.
* @row: Row number.
@@ -398,8 +396,8 @@ static void enable_intr(struct synps_edac_priv *priv)
/* Enable UE/CE Interrupts */
if (priv->p_data->quirks & SYNPS_ZYNQMP_IRQ_REGS) {
- writel(DDR_QOSUE_MASK | DDR_QOSCE_MASK,
- priv->baseaddr + DDR_QOS_IRQ_EN_OFST);
+ writel(ZYNQMP_DDR_QOS_UE_MASK | ZYNQMP_DDR_QOS_CE_MASK,
+ priv->baseaddr + ZYNQMP_DDR_QOS_IRQ_EN_OFST);
return;
}
@@ -410,7 +408,7 @@ static void enable_intr(struct synps_edac_priv *priv)
* IRQs Enable/Disable flags have been available since v3.10a.
* This is noop for the older controllers.
*/
- writel(DDR_UE_MASK | DDR_CE_MASK,
+ writel(ECC_CTRL_EN_CE_IRQ | ECC_CTRL_EN_UE_IRQ,
priv->baseaddr + ECC_CLR_OFST);
spin_unlock_irqrestore(&priv->reglock, flags);
@@ -422,8 +420,8 @@ static void disable_intr(struct synps_edac_priv *priv)
/* Disable UE/CE Interrupts */
if (priv->p_data->quirks & SYNPS_ZYNQMP_IRQ_REGS) {
- writel(DDR_QOSUE_MASK | DDR_QOSCE_MASK,
- priv->baseaddr + DDR_QOS_IRQ_DB_OFST);
+ writel(ZYNQMP_DDR_QOS_UE_MASK | ZYNQMP_DDR_QOS_CE_MASK,
+ priv->baseaddr + ZYNQMP_DDR_QOS_IRQ_DB_OFST);
return;
}
@@ -451,9 +449,9 @@ static irqreturn_t intr_handler(int irq, void *dev_id)
priv = mci->pvt_info;
if (priv->p_data->quirks & SYNPS_ZYNQMP_IRQ_REGS) {
- regval = readl(priv->baseaddr + DDR_QOS_IRQ_STAT_OFST);
- regval &= (DDR_QOSCE_MASK | DDR_QOSUE_MASK);
- if (!(regval & ECC_CE_UE_INTR_MASK))
+ regval = readl(priv->baseaddr + ZYNQMP_DDR_QOS_IRQ_STAT_OFST);
+ regval &= (ZYNQMP_DDR_QOS_CE_MASK | ZYNQMP_DDR_QOS_UE_MASK);
+ if (!(regval & ZYNQMP_DDR_QOS_IRQ_MASK))
return IRQ_NONE;
}
@@ -464,7 +462,7 @@ static irqreturn_t intr_handler(int irq, void *dev_id)
handle_error(mci, &priv->stat);
if (priv->p_data->quirks & SYNPS_ZYNQMP_IRQ_REGS)
- writel(regval, priv->baseaddr + DDR_QOS_IRQ_STAT_OFST);
+ writel(regval, priv->baseaddr + ZYNQMP_DDR_QOS_IRQ_STAT_OFST);
return IRQ_HANDLED;
}
@@ -483,18 +481,18 @@ static enum dev_type synps_get_dtype(const void __iomem *base)
u32 regval;
regval = readl(base + DDR_MSTR_OFST);
- if (!(regval & MEM_TYPE_DDR4))
+ if (!(regval & DDR_MSTR_MEM_DDR4))
return DEV_UNKNOWN;
- regval = (regval & DDRC_MSTR_CFG_MASK) >> DDRC_MSTR_CFG_SHIFT;
+ regval = (regval & DDR_MSTR_DEV_CFG_MASK) >> DDR_MSTR_DEV_CFG_SHIFT;
switch (regval) {
- case DDRC_MSTR_CFG_X4_MASK:
+ case DDR_MSTR_DEV_X4:
return DEV_X4;
- case DDRC_MSTR_CFG_X8_MASK:
+ case DDR_MSTR_DEV_X8:
return DEV_X8;
- case DDRC_MSTR_CFG_X16_MASK:
+ case DDR_MSTR_DEV_X16:
return DEV_X16;
- case DDRC_MSTR_CFG_X32_MASK:
+ case DDR_MSTR_DEV_X32:
return DEV_X32;
}
@@ -548,11 +546,11 @@ static enum mem_type synps_get_mtype(const void __iomem *base)
memtype = readl(base + DDR_MSTR_OFST);
- if ((memtype & MEM_TYPE_DDR3) || (memtype & MEM_TYPE_LPDDR3))
+ if ((memtype & DDR_MSTR_MEM_DDR3) || (memtype & DDR_MSTR_MEM_LPDDR3))
mt = MEM_DDR3;
- else if (memtype & MEM_TYPE_DDR2)
+ else if (memtype & DDR_MSTR_MEM_DDR2)
mt = MEM_RDDR2;
- else if ((memtype & MEM_TYPE_LPDDR4) || (memtype & MEM_TYPE_DDR4))
+ else if ((memtype & DDR_MSTR_MEM_LPDDR4) || (memtype & DDR_MSTR_MEM_DDR4))
mt = MEM_DDR4;
else
mt = MEM_EMPTY;
@@ -757,12 +755,12 @@ static ssize_t inject_data_poison_store(struct device *dev,
struct mem_ctl_info *mci = to_mci(dev);
struct synps_edac_priv *priv = mci->pvt_info;
- writel(0, priv->baseaddr + DDRC_SWCTL);
+ writel(0, priv->baseaddr + DDR_SWCTL);
if (strncmp(data, "CE", 2) == 0)
writel(ECC_CEPOISON_MASK, priv->baseaddr + ECC_CFG1_OFST);
else
writel(ECC_UEPOISON_MASK, priv->baseaddr + ECC_CFG1_OFST);
- writel(1, priv->baseaddr + DDRC_SWCTL);
+ writel(1, priv->baseaddr + DDR_SWCTL);
return count;
}
@@ -879,8 +877,8 @@ static void setup_column_address_map(struct synps_edac_priv *priv, u32 *addrmap)
priv->col_shift[9] = (((addrmap[3] >> 24) & COL_MAX_VAL_MASK) ==
COL_MAX_VAL_MASK) ? 0 : (((addrmap[3] >> 24) &
COL_MAX_VAL_MASK) + COL_B9_BASE);
- if (width == DDRCTL_EWDTH_64) {
- if (memtype & MEM_TYPE_LPDDR3) {
+ if (width == DDR_MSTR_BUSWIDTH_64) {
+ if (memtype & DDR_MSTR_MEM_LPDDR3) {
priv->col_shift[10] = ((addrmap[4] &
COL_MAX_VAL_MASK) == COL_MAX_VAL_MASK) ? 0 :
((addrmap[4] & COL_MAX_VAL_MASK) +
@@ -899,8 +897,8 @@ static void setup_column_address_map(struct synps_edac_priv *priv, u32 *addrmap)
(((addrmap[4] >> 8) & COL_MAX_VAL_MASK) +
COL_B11_BASE);
}
- } else if (width == DDRCTL_EWDTH_32) {
- if (memtype & MEM_TYPE_LPDDR3) {
+ } else if (width == DDR_MSTR_BUSWIDTH_32) {
+ if (memtype & DDR_MSTR_MEM_LPDDR3) {
priv->col_shift[10] = (((addrmap[3] >> 24) &
COL_MAX_VAL_MASK) == COL_MAX_VAL_MASK) ? 0 :
(((addrmap[3] >> 24) & COL_MAX_VAL_MASK) +
@@ -920,7 +918,7 @@ static void setup_column_address_map(struct synps_edac_priv *priv, u32 *addrmap)
COL_B10_BASE);
}
} else {
- if (memtype & MEM_TYPE_LPDDR3) {
+ if (memtype & DDR_MSTR_MEM_LPDDR3) {
priv->col_shift[10] = (((addrmap[3] >> 16) &
COL_MAX_VAL_MASK) == COL_MAX_VAL_MASK) ? 0 :
(((addrmap[3] >> 16) & COL_MAX_VAL_MASK) +
@@ -995,7 +993,7 @@ static void setup_address_map(struct synps_edac_priv *priv)
for (index = 0; index < 12; index++) {
u32 addrmap_offset;
- addrmap_offset = ECC_ADDRMAP0_OFFSET + (index * 4);
+ addrmap_offset = DDR_ADDRMAP0_OFST + (index * 4);
addrmap[index] = readl(priv->baseaddr + addrmap_offset);
}
--
2.41.0
Powered by blists - more mailing lists