[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <CAJF2gTRNQwEgcFKOUt_A6jzF1k8GeU46FTvLBsE2YkHzGMvP6A@mail.gmail.com>
Date: Wed, 20 Sep 2023 16:08:17 +0800
From: Guo Ren <guoren@...nel.org>
To: Chen Wang <unicorn_wang@...look.com>
Cc: Chen Wang <unicornxw@...il.com>, aou@...s.berkeley.edu,
chao.wei@...hgo.com, conor@...nel.org, devicetree@...r.kernel.org,
emil.renner.berthing@...onical.com, jszhang@...nel.org,
krzysztof.kozlowski+dt@...aro.org, linux-kernel@...r.kernel.org,
linux-riscv@...ts.infradead.org, palmer@...belt.com,
paul.walmsley@...ive.com, robh+dt@...nel.org,
xiaoguang.xing@...hgo.com, Chen Wang <wangchen20@...as.ac.cn>
Subject: Re: [PATCH v2 08/11] serial: 8250_dw: Add Sophgo SG2042 support
On Wed, Sep 20, 2023 at 4:06 PM Chen Wang <unicorn_wang@...look.com> wrote:
>
> Ren, thanks for your review.
>
> sg2042 and jh7100 use the same uart driver and we here just want to reuse the logic from jh7100.
> We don't touch jh7100 stuff, we just rename "dw8250_starfive_jh7100_data" to "dw8250_skip_set_rate_data" and make it a common data for both sg2042 and jh7100.
Okay, I got it now.
LGTM
Reviewed-by: Guo Ren <guoren@...nel.org>
>
> 在 2023/9/20 15:53, Guo Ren 写道:
> > On Wed, Sep 20, 2023 at 2:40 PM Chen Wang <unicornxw@...il.com> wrote:
> >> From: Emil Renner Berthing <emil.renner.berthing@...onical.com>
> >>
> >> Add quirk to skip setting the input clock rate for the uarts on the
> >> Sophgo SG2042 SoC similar to the StarFive JH7100.
> >>
> >> Signed-off-by: Emil Renner Berthing <emil.renner.berthing@...onical.com>
> >> Signed-off-by: Chen Wang <wangchen20@...as.ac.cn>
> >> ---
> >> drivers/tty/serial/8250/8250_dw.c | 5 +++--
> >> 1 file changed, 3 insertions(+), 2 deletions(-)
> >>
> >> diff --git a/drivers/tty/serial/8250/8250_dw.c b/drivers/tty/serial/8250/8250_dw.c
> >> index f4cafca1a7da..6c344877a07f 100644
> >> --- a/drivers/tty/serial/8250/8250_dw.c
> >> +++ b/drivers/tty/serial/8250/8250_dw.c
> >> @@ -770,7 +770,7 @@ static const struct dw8250_platform_data dw8250_renesas_rzn1_data = {
> >> .quirks = DW_UART_QUIRK_IS_DMA_FC,
> >> };
> >>
> >> -static const struct dw8250_platform_data dw8250_starfive_jh7100_data = {
> >> +static const struct dw8250_platform_data dw8250_skip_set_rate_data = {
> >> .usr_reg = DW_UART_USR,
> >> .quirks = DW_UART_QUIRK_SKIP_SET_RATE,
> >> };
> >> @@ -780,7 +780,8 @@ static const struct of_device_id dw8250_of_match[] = {
> >> { .compatible = "cavium,octeon-3860-uart", .data = &dw8250_octeon_3860_data },
> >> { .compatible = "marvell,armada-38x-uart", .data = &dw8250_armada_38x_data },
> >> { .compatible = "renesas,rzn1-uart", .data = &dw8250_renesas_rzn1_data },
> >> - { .compatible = "starfive,jh7100-uart", .data = &dw8250_starfive_jh7100_data },
> >> + { .compatible = "sophgo,sg2042-uart", .data = &dw8250_skip_set_rate_data },
> >> + { .compatible = "starfive,jh7100-uart", .data = &dw8250_skip_set_rate_data },
> > Why shall we touch the jh7100 stuff in this patch?
> >
> >> { /* Sentinel */ }
> >> };
> >> MODULE_DEVICE_TABLE(of, dw8250_of_match);
> >> --
> >> 2.25.1
> >>
> >
--
Best Regards
Guo Ren
Powered by blists - more mailing lists