| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20230921-msm8916-rmem-fixups-v1-3-34d2b6e721cf@gerhold.net>
Date: Thu, 21 Sep 2023 20:56:06 +0200
From: Stephan Gerhold <stephan@...hold.net>
To: Bjorn Andersson <andersson@...nel.org>
Cc: Andy Gross <agross@...nel.org>,
Konrad Dybcio <konrad.dybcio@...aro.org>,
Bryan O'Donoghue <bryan.odonoghue@...aro.org>,
linux-arm-msm@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, Stephan Gerhold <stephan@...hold.net>
Subject: [PATCH 3/3] arm64: dts: qcom: msm8916-*: Fix alphabetic node order
Fix a couple of instances of incorrectly sorted nodes in the MSM8916
boards. They should be ordered alphabetically for consistency.
No functional change.
Signed-off-by: Stephan Gerhold <stephan@...hold.net>
---
Changing the RGB LED node order to BGR is a bit funny but this is how
alphabetic ordering works. :-)
---
.../boot/dts/qcom/msm8916-alcatel-idol347.dts | 8 ++---
.../boot/dts/qcom/msm8916-samsung-a3u-eur.dts | 10 +++---
.../boot/dts/qcom/msm8916-samsung-gt5-common.dtsi | 38 +++++++++++-----------
arch/arm64/boot/dts/qcom/msm8916-thwc-uf896.dts | 8 ++---
arch/arm64/boot/dts/qcom/msm8916-thwc-ufi001c.dts | 8 ++---
.../arm64/boot/dts/qcom/msm8916-yiming-uz801v3.dts | 8 ++---
6 files changed, 40 insertions(+), 40 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/msm8916-alcatel-idol347.dts b/arch/arm64/boot/dts/qcom/msm8916-alcatel-idol347.dts
index aa4c1ab1e673..fade93c55299 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-alcatel-idol347.dts
+++ b/arch/arm64/boot/dts/qcom/msm8916-alcatel-idol347.dts
@@ -58,10 +58,6 @@ usb_id: usb-id {
};
};
-&blsp_uart2 {
- status = "okay";
-};
-
&blsp_i2c4 {
status = "okay";
@@ -153,6 +149,10 @@ led@1 {
};
};
+&blsp_uart2 {
+ status = "okay";
+};
+
&pm8916_resin {
status = "okay";
linux,code = <KEY_VOLUMEDOWN>;
diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-a3u-eur.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-a3u-eur.dts
index f5a808369518..3b934f5eba47 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-samsung-a3u-eur.dts
+++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-a3u-eur.dts
@@ -49,11 +49,6 @@ reg_key_led: regulator-key-led {
};
};
-&touchkey {
- vcc-supply = <®_touch_key>;
- vdd-supply = <®_key_led>;
-};
-
&accelerometer {
mount-matrix = "0", "1", "0",
"1", "0", "0",
@@ -108,6 +103,11 @@ &mdss_dsi0_out {
remote-endpoint = <&panel_in>;
};
+&touchkey {
+ vcc-supply = <®_touch_key>;
+ vdd-supply = <®_key_led>;
+};
+
&vibrator {
status = "okay";
};
diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-gt5-common.dtsi b/arch/arm64/boot/dts/qcom/msm8916-samsung-gt5-common.dtsi
index c19cf20d7427..6a16eb5ce07b 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-samsung-gt5-common.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-gt5-common.dtsi
@@ -65,25 +65,6 @@ hall-sensor-switch {
};
};
-&blsp_i2c4 {
- status = "okay";
-
- fuelgauge@36 {
- compatible = "maxim,max77849-battery";
- reg = <0x36>;
-
- maxim,rsns-microohm = <10000>;
- maxim,over-heat-temp = <600>;
- maxim,over-volt = <4400>;
-
- interrupt-parent = <&tlmm>;
- interrupts = <121 IRQ_TYPE_EDGE_FALLING>;
-
- pinctrl-0 = <&fuelgauge_int_default>;
- pinctrl-names = "default";
- };
-};
-
&blsp_i2c2 {
status = "okay";
@@ -112,6 +93,25 @@ accelerometer@1d {
};
};
+&blsp_i2c4 {
+ status = "okay";
+
+ fuelgauge@36 {
+ compatible = "maxim,max77849-battery";
+ reg = <0x36>;
+
+ maxim,rsns-microohm = <10000>;
+ maxim,over-heat-temp = <600>;
+ maxim,over-volt = <4400>;
+
+ interrupt-parent = <&tlmm>;
+ interrupts = <121 IRQ_TYPE_EDGE_FALLING>;
+
+ pinctrl-0 = <&fuelgauge_int_default>;
+ pinctrl-names = "default";
+ };
+};
+
&blsp_uart2 {
status = "okay";
};
diff --git a/arch/arm64/boot/dts/qcom/msm8916-thwc-uf896.dts b/arch/arm64/boot/dts/qcom/msm8916-thwc-uf896.dts
index 6fe1850ba20e..f34997500891 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-thwc-uf896.dts
+++ b/arch/arm64/boot/dts/qcom/msm8916-thwc-uf896.dts
@@ -13,16 +13,16 @@ &button_restart {
gpios = <&tlmm 35 GPIO_ACTIVE_LOW>;
};
-&led_r {
- gpios = <&tlmm 82 GPIO_ACTIVE_HIGH>;
+&led_b {
+ gpios = <&tlmm 81 GPIO_ACTIVE_HIGH>;
};
&led_g {
gpios = <&tlmm 83 GPIO_ACTIVE_HIGH>;
};
-&led_b {
- gpios = <&tlmm 81 GPIO_ACTIVE_HIGH>;
+&led_r {
+ gpios = <&tlmm 82 GPIO_ACTIVE_HIGH>;
};
&button_default {
diff --git a/arch/arm64/boot/dts/qcom/msm8916-thwc-ufi001c.dts b/arch/arm64/boot/dts/qcom/msm8916-thwc-ufi001c.dts
index 16d4a91022be..6cb3911ba1c9 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-thwc-ufi001c.dts
+++ b/arch/arm64/boot/dts/qcom/msm8916-thwc-ufi001c.dts
@@ -13,16 +13,16 @@ &button_restart {
gpios = <&tlmm 37 GPIO_ACTIVE_HIGH>;
};
-&led_r {
- gpios = <&tlmm 22 GPIO_ACTIVE_HIGH>;
+&led_b {
+ gpios = <&tlmm 20 GPIO_ACTIVE_HIGH>;
};
&led_g {
gpios = <&tlmm 21 GPIO_ACTIVE_HIGH>;
};
-&led_b {
- gpios = <&tlmm 20 GPIO_ACTIVE_HIGH>;
+&led_r {
+ gpios = <&tlmm 22 GPIO_ACTIVE_HIGH>;
};
&mpss {
diff --git a/arch/arm64/boot/dts/qcom/msm8916-yiming-uz801v3.dts b/arch/arm64/boot/dts/qcom/msm8916-yiming-uz801v3.dts
index 5e6ba8c58bb5..a98efcfe78b7 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-yiming-uz801v3.dts
+++ b/arch/arm64/boot/dts/qcom/msm8916-yiming-uz801v3.dts
@@ -13,16 +13,16 @@ &button_restart {
gpios = <&tlmm 23 GPIO_ACTIVE_LOW>;
};
-&led_r {
- gpios = <&tlmm 7 GPIO_ACTIVE_HIGH>;
+&led_b {
+ gpios = <&tlmm 6 GPIO_ACTIVE_HIGH>;
};
&led_g {
gpios = <&tlmm 8 GPIO_ACTIVE_HIGH>;
};
-&led_b {
- gpios = <&tlmm 6 GPIO_ACTIVE_HIGH>;
+&led_r {
+ gpios = <&tlmm 7 GPIO_ACTIVE_HIGH>;
};
&button_default {
--
2.42.0
Powered by blists - more mailing lists