| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20230921113040.2dafb3d50cfdd8727de42356@hugovil.com>
Date: Thu, 21 Sep 2023 11:30:40 -0400
From: Hugo Villeneuve <hugo@...ovil.com>
To: Conor Dooley <conor@...nel.org>
Cc: gregkh@...uxfoundation.org, jirislaby@...nel.org,
robh+dt@...nel.org, krzysztof.kozlowski+dt@...aro.org,
conor+dt@...nel.org, hvilleneuve@...onoff.com,
linux-kernel@...r.kernel.org, linux-serial@...r.kernel.org,
devicetree@...r.kernel.org
Subject: Re: [PATCH 4/4] dt-bindings: sc16is7xx: convert to YAML
On Thu, 21 Sep 2023 14:45:06 +0100
Conor Dooley <conor@...nel.org> wrote:
> Hey,
>
> On Wed, Sep 20, 2023 at 11:20:15AM -0400, Hugo Villeneuve wrote:
> > From: Hugo Villeneuve <hvilleneuve@...onoff.com>
> >
> > Convert binding from text format to YAML.
> >
> > Additions to original text binding:
> > - add rs485 reference.
> >
> > Signed-off-by: Hugo Villeneuve <hvilleneuve@...onoff.com>
> > ---
> > .../bindings/serial/nxp,sc16is7xx.txt | 118 ----------------
> > .../bindings/serial/nxp,sc16is7xx.yaml | 126 ++++++++++++++++++
> > 2 files changed, 126 insertions(+), 118 deletions(-)
> > delete mode 100644 Documentation/devicetree/bindings/serial/nxp,sc16is7xx.txt
> > create mode 100644 Documentation/devicetree/bindings/serial/nxp,sc16is7xx.yaml
>
> > diff --git a/Documentation/devicetree/bindings/serial/nxp,sc16is7xx.yaml b/Documentation/devicetree/bindings/serial/nxp,sc16is7xx.yaml
> > new file mode 100644
> > index 000000000000..508639e09e06
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/serial/nxp,sc16is7xx.yaml
> > @@ -0,0 +1,126 @@
> > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/serial/nxp,sc16is7xx.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: NXP SC16IS7xx advanced Universal Asynchronous Receiver-Transmitter (UART)
>
> nit, but my OCD was triggered - capitalise the a in "advanced"?
Hi Conor,
no problem, I like that :)
Will fix it for V2.
> > +
> > +maintainers:
> > + - Hugo Villeneuve <hvilleneuve@...onoff.com>
> > +
> > +properties:
> > + compatible:
> > + enum:
> > + - nxp,sc16is740
> > + - nxp,sc16is741
> > + - nxp,sc16is750
> > + - nxp,sc16is752
> > + - nxp,sc16is760
> > + - nxp,sc16is762
> > +
> > + reg:
> > + maxItems: 1
> > +
> > + interrupts:
> > + maxItems: 1
> > +
> > + clocks:
> > + maxItems: 1
> > + description: Reference to the IC source clock.
>
> You could probably drop this, if it only has one clock it's a bit
> redundant.
I don't understand, because there is already a 'clocks' property in
the examples (and also in my real board DTS file) and if I remove it
here it will cause a warning:
serial@51: Unevaluated properties are not allowed ('clocks' was
unexpected)
> > + clock-frequency:
> > + description: |
>
> This | should not be needed here, there's no formatting to preserve.
Done.
>
> > + When there is no clock provider visible to the platform, this
> > + is the source crystal or external clock frequency for the IC in Hz.
> > + $ref: /schemas/types.yaml#/definitions/uint32
> > + minimum: 1
> > + maximum: 80000000
> > +
> > + gpio-controller:
> > + description: Marks the device node as a GPIO controller.
> > + type: boolean
> > +
> > + "#gpio-cells":
> > + const: 2
> > +
> > + gpio-line-names:
> > + minItems: 1
> > + maxItems: 8
> > +
> > + nxp,irda-mode-ports:
> > + description: |
> > + An array that lists the indices of the port that should operate in IrDA
> > + mode:
> > + 0: port A
> > + 1: port B
> > + $ref: /schemas/types.yaml#/definitions/uint32-array
> > + minItems: 1
> > + maxItems: 2
> > + items:
> > + minimum: 0
> > + maximum: 1
> > +
> > + nxp,modem-control-line-ports:
> > + description: |
> > + An array that lists the indices of the port that should have shared GPIO
> > + lines configured as modem control lines:
> > + 0: port A
> > + 1: port B
> > + $ref: /schemas/types.yaml#/definitions/uint32-array
> > + minItems: 1
> > + maxItems: 2
> > + items:
> > + minimum: 0
> > + maximum: 1
> > +
> > +allOf:
> > + - $ref: /schemas/spi/spi-peripheral-props.yaml#
> > + - $ref: /schemas/serial/serial.yaml#
> > + - $ref: /schemas/serial/rs485.yaml#
> > +
> > +required:
> > + - compatible
> > + - reg
> > + - interrupts
> > +
> > +oneOf:
> > + - required:
> > + - clocks
> > + - required:
> > + - clock-frequency
> > +
> > +unevaluatedProperties: false
> > +
> > +examples:
> > + - |
> > + #include <dt-bindings/interrupt-controller/irq.h>
> > + serial0: serial@51 {
>
> These labels are not used and should be removed.
Done.
Thank you,
Hugo.
> Otherwise, conversion looks aight to me.
>
> Thanks,
> Conor.
>
> > + compatible = "nxp,sc16is750";
> > + reg = <0x51>;
> > + clocks = <&clk20m>;
> > + interrupt-parent = <&gpio3>;
> > + interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
> > + gpio-controller;
> > + #gpio-cells = <2>;
> > + };
> > +
> > + serial1: serial@53 {
> > + compatible = "nxp,sc16is752";
> > + reg = <0x53>;
> > + clocks = <&clk20m>;
> > + interrupt-parent = <&gpio3>;
> > + interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
> > + nxp,modem-control-line-ports = <1>; /* Port 1 as modem control lines */
> > + gpio-controller; /* Port 0 as GPIOs */
> > + #gpio-cells = <2>;
> > + };
> > +
> > + serial2: serial@54 {
> > + compatible = "nxp,sc16is752";
> > + reg = <0x54>;
> > + clocks = <&clk20m>;
> > + interrupt-parent = <&gpio3>;
> > + interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
> > + nxp,modem-control-line-ports = <0 1>; /* Ports 0 and 1 as modem control lines */
> > + };
> > --
> > 2.30.2
> >
Powered by blists - more mailing lists