| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Thu, 21 Sep 2023 14:37:09 +0530
From: Naresh Solanki <naresh.solanki@...ements.com>
To: Lee Jones <lee@...nel.org>
Cc: Pavel Machek <pavel@....cz>,
Patrick Rudolph <patrick.rudolph@...ements.com>,
linux-kernel@...r.kernel.org, linux-leds@...r.kernel.org
Subject: Re: [RESEND PATCH v3] leds: max5970: Add support for max5970
Hi
On Wed, 20 Sept 2023 at 18:35, Lee Jones <lee@...nel.org> wrote:
>
> On Thu, 14 Sep 2023, Naresh Solanki wrote:
>
> > From: Patrick Rudolph <patrick.rudolph@...ements.com>
> >
> > The MAX5970 is hot swap controller and has 4 indication LED.
> >
> > Signed-off-by: Patrick Rudolph <patrick.rudolph@...ements.com>
> > Signed-off-by: Naresh Solanki <Naresh.Solanki@...ements.com>
> > ---
> > Changes in V3:
> > - Drop array for ddata variable.
> > Changes in V2:
> > - Add of_node_put before return.
> > - Code cleanup
> > - Refactor code & remove max5970_setup_led function.
> > ---
> > drivers/leds/Kconfig | 11 ++++
> > drivers/leds/Makefile | 1 +
> > drivers/leds/leds-max5970.c | 110 ++++++++++++++++++++++++++++++++++++
> > 3 files changed, 122 insertions(+)
> > create mode 100644 drivers/leds/leds-max5970.c
>
> Couple of nits and you're good to go.
>
> Once fixed please resubmit with my:
>
> Reviewed-by: Lee Jones <lee@...nel.org>
>
> > diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
> > index b92208eccdea..03ef527cc545 100644
> > --- a/drivers/leds/Kconfig
> > +++ b/drivers/leds/Kconfig
> > @@ -637,6 +637,17 @@ config LEDS_ADP5520
> > To compile this driver as a module, choose M here: the module will
> > be called leds-adp5520.
> >
> > +config LEDS_MAX5970
> > + tristate "LED Support for Maxim 5970"
> > + depends on LEDS_CLASS
> > + depends on MFD_MAX5970
> > + help
> > + This option enables support for the Maxim MAX5970 & MAX5978 smart
> > + switch indication LEDs via the I2C bus.
> > +
> > + To compile this driver as a module, choose M here: the module will
> > + be called leds-max5970.
> > +
> > config LEDS_MC13783
> > tristate "LED Support for MC13XXX PMIC"
> > depends on LEDS_CLASS
> > diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile
> > index d7348e8bc019..6eaee0a753c6 100644
> > --- a/drivers/leds/Makefile
> > +++ b/drivers/leds/Makefile
> > @@ -56,6 +56,7 @@ obj-$(CONFIG_LEDS_LP8501) += leds-lp8501.o
> > obj-$(CONFIG_LEDS_LP8788) += leds-lp8788.o
> > obj-$(CONFIG_LEDS_LP8860) += leds-lp8860.o
> > obj-$(CONFIG_LEDS_LT3593) += leds-lt3593.o
> > +obj-$(CONFIG_LEDS_MAX5970) += leds-max5970.o
> > obj-$(CONFIG_LEDS_MAX77650) += leds-max77650.o
> > obj-$(CONFIG_LEDS_MAX8997) += leds-max8997.o
> > obj-$(CONFIG_LEDS_MC13783) += leds-mc13783.o
> > diff --git a/drivers/leds/leds-max5970.c b/drivers/leds/leds-max5970.c
> > new file mode 100644
> > index 000000000000..c9685990e26e
> > --- /dev/null
> > +++ b/drivers/leds/leds-max5970.c
> > @@ -0,0 +1,110 @@
> > +// SPDX-License-Identifier: GPL-2.0
> > +/*
> > + * Device driver for leds in MAX5970 and MAX5978 IC
> > + *
> > + * Copyright (c) 2022 9elements GmbH
> > + *
> > + * Author: Patrick Rudolph <patrick.rudolph@...ements.com>
> > + */
> > +
> > +#include <linux/leds.h>
> > +#include <linux/mfd/max5970.h>
> > +#include <linux/of.h>
> > +#include <linux/platform_device.h>
> > +#include <linux/regmap.h>
> > +
> > +#define ldev_to_maxled(c) container_of(c, struct max5970_led, cdev)
> > +
> > +struct max5970_led {
> > + struct device *dev;
> > + struct regmap *regmap;
> > + struct led_classdev cdev;
> > + unsigned int index;
> > +};
> > +
> > +static int max5970_led_set_brightness(struct led_classdev *cdev,
> > + enum led_brightness brightness)
> > +{
> > + struct max5970_led *ddata = ldev_to_maxled(cdev);
> > + int ret, val;
> > +
> > + /* Set/clear corresponding bit for given led index */
> > + val = !brightness ? BIT(ddata->index) : 0;
> > +
> > + ret = regmap_update_bits(ddata->regmap, MAX5970_REG_LED_FLASH, BIT(ddata->index), val);
> > + if (ret < 0)
> > + dev_err(cdev->dev, "failed to set brightness %d", ret);
> > +
> > + return ret;
> > +}
> > +
> > +static int max5970_led_probe(struct platform_device *pdev)
> > +{
> > + struct device *dev = &pdev->dev;
> > + struct device_node *np = dev_of_node(dev->parent);
> > + struct regmap *regmap;
> > + struct device_node *led_node;
> > + struct device_node *child;
>
> Nit: You can place these on the same line.
Ack
>
> > + struct max5970_led *ddata;
> > + int ret = -ENODEV, num_leds = 0;
> > +
> > + regmap = dev_get_regmap(pdev->dev.parent, NULL);
> > + if (!regmap)
> > + return -EPROBE_DEFER;
>
> Why are you deferring here?
This is a Leaf driver. Making sure the parent driver has initialized regmap.
>
> > + led_node = of_get_child_by_name(np, "leds");
> > + if (!led_node)
> > + return -ENODEV;
> > +
> > + for_each_available_child_of_node(led_node, child) {
> > + u32 reg;
> > +
> > + if (of_property_read_u32(child, "reg", ®))
> > + continue;
> > +
> > + if (reg >= MAX5970_NUM_LEDS) {
> > + dev_err(dev, "invalid LED (%u >= %d)\n", reg, MAX5970_NUM_LEDS);
> > + continue;
> > + }
> > +
> > + ddata = devm_kzalloc(dev, sizeof(struct max5970_led), GFP_KERNEL);
>
> Nit: sizeof(*ddata)
Ack
>
> > + if (!ddata) {
> > + of_node_put(child);
> > + return -ENOMEM;
> > + }
> > +
> > + ddata->index = reg;
> > + ddata->regmap = regmap;
> > + ddata->dev = dev;
> > +
> > + if (of_property_read_string(child, "label", &ddata->cdev.name))
> > + ddata->cdev.name = child->name;
> > +
> > + ddata->cdev.max_brightness = 1;
> > + ddata->cdev.brightness_set_blocking = max5970_led_set_brightness;
> > + ddata->cdev.default_trigger = "none";
> > +
> > + ret = devm_led_classdev_register(ddata->dev, &ddata->cdev);
>
> Nit: Use the shorter 'dev' version whilst it's available.
Ack
>
> > + if (ret < 0) {
> > + of_node_put(child);
> > + dev_err(dev, "Failed to initialize LED %u\n", reg);
> > + return ret;
> > + }
> > + num_leds++;
> > + }
> > +
> > + return ret;
> > +}
> > +
> > +static struct platform_driver max5970_led_driver = {
> > + .driver = {
> > + .name = "max5970-led",
> > + },
> > + .probe = max5970_led_probe,
> > +};
> > +
> > +module_platform_driver(max5970_led_driver);
> > +MODULE_AUTHOR("Patrick Rudolph <patrick.rudolph@...ements.com>");
> > +MODULE_AUTHOR("Naresh Solanki <Naresh.Solanki@...ements.com>");
> > +MODULE_DESCRIPTION("MAX5970_hot-swap controller LED driver");
> > +MODULE_LICENSE("GPL");
> >
> > base-commit: baca986e1f2c31f8e4b2a6d99d47c3bc844033e8
> > --
> > 2.41.0
> >
>
> --
> Lee Jones [李琼斯]
Powered by blists - more mailing lists