>From ca887b5ed3b344562411cf2876a68a82bd0f584b Mon Sep 17 00:00:00 2001 From: Chao Peng Date: Wed, 13 Sep 2023 18:55:05 -0700 Subject: [PATCH] KVM: Add KVM_EXIT_MEMORY_FAULT exit to report faults to userspace Add a new KVM exit type to allow userspace to handle memory faults that KVM cannot resolve, but that userspace *may* be able to handle (without terminating the guest). KVM will initially use KVM_EXIT_MEMORY_FAULT to report implicit conversions between private and shared memory. With guest private memory, there will be two kind of memory conversions: - explicit conversion: happens when the guest explicitly calls into KVM to map a range (as private or shared) - implicit conversion: happens when the guest attempts to access a gfn that is configured in the "wrong" state (private vs. shared) On x86 (first architecture to support guest private memory), explicit conversions will be reported via KVM_EXIT_HYPERCALL+KVM_HC_MAP_GPA_RANGE, but reporting KVM_EXIT_HYPERCALL for implicit conversions is undesriable as there is (obviously) no hypercall, and there is no guarantee that the guest actually intends to convert between private and shared, i.e. what KVM thinks is an implicit conversion "request" could actually be the result of a guest code bug. KVM_EXIT_MEMORY_FAULT will be used to report memory faults that appear to be implicit conversions. Use bit 3 for flagging private memory so that KVM can use bits 0-2 for capturing RWX behavior if/when userspace needs such information. Add a new capability, KVM_CAP_MEMORY_FAULT_INFO, to advertise support for KVM_EXIT_MEMORY_FAULT. There is at least one other in-flight use case for using KVM_EXIT_MEMORY_FAULT+memory_fault to resolve faults in userspace, providing a dedicated capability allows userspace to query KVM support for annotating faults without having to depend on an unrelated feature, i.e. the proposed userfault-on-missing functionality shouldn't have to depend on private memory support. Note! To allow for future possibilities where KVM reports KVM_EXIT_MEMORY_FAULT and fills run->memory_fault on _any_ unresolved fault, KVM returns "-EFAULT" (-1 with errno == EFAULT from userspace's perspective), not '0'! Due to historical baggage within KVM, exiting to userspace with '0' from deep callstacks, e.g. in emulation paths, is infeasible as doing so would require a near-complete overhaul of KVM, whereas KVM already propagates -errno return codes to userspace even when the -errno originated in a low level helper. Returning an errno will also allow KVM to differentiate hardware poisoned memory errors, i.e. by returning with errno=EHWPOISON. Link: https://lore.kernel.org/all/20230908222905.1321305-5-amoorthy@google.com Cc: Anish Moorthy Suggested-by: Sean Christopherson Co-developed-by: Yu Zhang Signed-off-by: Yu Zhang Signed-off-by: Chao Peng Co-developed-by: Anish Moorthy Signed-off-by: Anish Moorthy Co-developed-by: Sean Christopherson Signed-off-by: Sean Christopherson --- Documentation/virt/kvm/api.rst | 45 ++++++++++++++++++++++++++++++++++ arch/x86/kvm/x86.c | 1 + include/linux/kvm_host.h | 15 ++++++++++++ include/uapi/linux/kvm.h | 9 +++++++ virt/kvm/kvm_main.c | 10 ++++++++ 5 files changed, 80 insertions(+) diff --git a/Documentation/virt/kvm/api.rst b/Documentation/virt/kvm/api.rst index 21a7578142a1..63347d0add3b 100644 --- a/Documentation/virt/kvm/api.rst +++ b/Documentation/virt/kvm/api.rst @@ -6702,6 +6702,30 @@ array field represents return values. The userspace should update the return values of SBI call before resuming the VCPU. For more details on RISC-V SBI spec refer, https://github.com/riscv/riscv-sbi-doc. +:: + + /* KVM_EXIT_MEMORY_FAULT */ + struct { + #define KVM_MEMORY_EXIT_FLAG_PRIVATE (1ULL << 3) + __u64 flags; + __u64 gpa; + __u64 size; + } memory; + +KVM_EXIT_MEMORY_FAULT indicates the vCPU has encountered a memory fault that +could not be resolved by KVM. The 'gpa' and 'size' (in bytes) describe the +guest physical address range [gpa, gpa + size) of the fault. The 'flags' field +describes properties of the faulting access that are likely pertinent: + + - KVM_MEMORY_EXIT_FLAG_PRIVATE - When set, indicates the memory fault occurred + on a private memory access. When clear, indicates the fault occurred on a + shared access. + +Note! KVM_EXIT_MEMORY_FAULT is unique among all KVM exit reasons in that it +accompanies a return code of '-1', not '0'! errno will always be set to EFAULT +or EHWPOISON when KVM exits with KVM_EXIT_MEMORY_FAULT, userspace should assume +kvm_run.exit_reason is stale/undefined for all other error numbers. + :: /* KVM_EXIT_NOTIFY */ @@ -7736,6 +7760,27 @@ This capability is aimed to mitigate the threat that malicious VMs can cause CPU stuck (due to event windows don't open up) and make the CPU unavailable to host or other VMs. +7.34 KVM_CAP_MEMORY_FAULT_INFO +------------------------------ + +:Architectures: x86 +:Returns: Informational only, -EINVAL on direct KVM_ENABLE_CAP. + +The presence of this capability indicates that KVM_RUN *may* fill +kvm_run.memory_fault in response to failed guest memory accesses in a vCPU +context. KVM only guarantees that errors that occur when handling guest page +fault VM-Exits will be annotated, all other error paths are best effort. + +The information in kvm_run.memory_fault is valid if and only if KVM_RUN returns +an error with errno=EFAULT or errno=EHWPOISON *and* kvm_run.exit_reason is set +to KVM_EXIT_MEMORY_FAULT. + +Note: Userspaces which attempt to resolve memory faults so that they can retry +KVM_RUN are encouraged to guard against repeatedly receiving the same +error/annotated fault. + +See KVM_EXIT_MEMORY_FAULT for more information. + 8. Other capabilities. ====================== diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c index 8356907079e1..f58df6efffa4 100644 --- a/arch/x86/kvm/x86.c +++ b/arch/x86/kvm/x86.c @@ -4518,6 +4518,7 @@ int kvm_vm_ioctl_check_extension(struct kvm *kvm, long ext) case KVM_CAP_ENABLE_CAP: case KVM_CAP_VM_DISABLE_NX_HUGE_PAGES: case KVM_CAP_IRQFD_RESAMPLE: + case KVM_CAP_MEMORY_FAULT_INFO: r = 1; break; case KVM_CAP_EXIT_HYPERCALL: diff --git a/include/linux/kvm_host.h b/include/linux/kvm_host.h index 4e741ff27af3..d8c6ce6c8211 100644 --- a/include/linux/kvm_host.h +++ b/include/linux/kvm_host.h @@ -2327,4 +2327,19 @@ static inline void kvm_account_pgtable_pages(void *virt, int nr) /* Max number of entries allowed for each kvm dirty ring */ #define KVM_DIRTY_RING_MAX_ENTRIES 65536 +static inline void kvm_prepare_memory_fault_exit(struct kvm_vcpu *vcpu, + gpa_t gpa, gpa_t size, + bool is_write, bool is_exec, + bool is_private) +{ + vcpu->run->exit_reason = KVM_EXIT_MEMORY_FAULT; + vcpu->run->memory_fault.gpa = gpa; + vcpu->run->memory_fault.size = size; + + /* RWX flags are not (yet) defined or communicated to userspace. */ + vcpu->run->memory_fault.flags = 0; + if (is_private) + vcpu->run->memory_fault.flags |= KVM_MEMORY_EXIT_FLAG_PRIVATE; +} + #endif diff --git a/include/uapi/linux/kvm.h b/include/uapi/linux/kvm.h index bd1abe067f28..5239d3fc1082 100644 --- a/include/uapi/linux/kvm.h +++ b/include/uapi/linux/kvm.h @@ -274,6 +274,7 @@ struct kvm_xen_exit { #define KVM_EXIT_RISCV_SBI 35 #define KVM_EXIT_RISCV_CSR 36 #define KVM_EXIT_NOTIFY 37 +#define KVM_EXIT_MEMORY_FAULT 38 /* For KVM_EXIT_INTERNAL_ERROR */ /* Emulate instruction failed. */ @@ -520,6 +521,13 @@ struct kvm_run { #define KVM_NOTIFY_CONTEXT_INVALID (1 << 0) __u32 flags; } notify; + /* KVM_EXIT_MEMORY_FAULT */ + struct { +#define KVM_MEMORY_EXIT_FLAG_PRIVATE (1ULL << 3) + __u64 flags; + __u64 gpa; + __u64 size; + } memory_fault; /* Fix the size of the union. */ char padding[256]; }; @@ -1203,6 +1211,7 @@ struct kvm_ppc_resize_hpt { #define KVM_CAP_ARM_EAGER_SPLIT_CHUNK_SIZE 228 #define KVM_CAP_ARM_SUPPORTED_BLOCK_SIZES 229 #define KVM_CAP_USER_MEMORY2 230 +#define KVM_CAP_MEMORY_FAULT_INFO 231 #ifdef KVM_CAP_IRQ_ROUTING diff --git a/virt/kvm/kvm_main.c b/virt/kvm/kvm_main.c index 7c0e38752526..d13b646188e5 100644 --- a/virt/kvm/kvm_main.c +++ b/virt/kvm/kvm_main.c @@ -4184,6 +4184,16 @@ static long kvm_vcpu_ioctl(struct file *filp, synchronize_rcu(); put_pid(oldpid); } + + /* + * Reset the exit reason if the previous userspace exit was due + * to a memory fault. Not all -EFAULT exits are annotated, and + * so leaving exit_reason set to KVM_EXIT_MEMORY_FAULT could + * result in feeding userspace stale information. + */ + if (vcpu->run->exit_reason == KVM_EXIT_MEMORY_FAULT) + vcpu->run->exit_reason = KVM_EXIT_UNKNOWN + r = kvm_arch_vcpu_ioctl_run(vcpu); trace_kvm_userspace_exit(vcpu->run->exit_reason, r); break; base-commit: 2358793cd9062b068ac25ac9c965c00d685eea92 -- 2.42.0.515.g380fc7ccd1-goog