[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20230923134904.3627402-3-vladimir.oltean@nxp.com>
Date: Sat, 23 Sep 2023 16:48:51 +0300
From: Vladimir Oltean <vladimir.oltean@....com>
To: netdev@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-phy@...ts.infradead.org
Cc: "Russell King (Oracle)" <rmk+kernel@...linux.org.uk>,
Heiner Kallweit <hkallweit1@...il.com>,
Andrew Lunn <andrew@...n.ch>,
Florian Fainelli <f.fainelli@...il.com>,
Madalin Bucur <madalin.bucur@....com>,
Ioana Ciornei <ioana.ciornei@....com>,
Camelia Groza <camelia.groza@....com>,
Li Yang <leoyang.li@....com>, Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Conor Dooley <conor@...nel.org>,
Sean Anderson <sean.anderson@...o.com>,
Maxime Chevallier <maxime.chevallier@...tlin.com>,
Vinod Koul <vkoul@...nel.org>,
Kishon Vijay Abraham I <kishon@...nel.org>
Subject: [RFC PATCH v2 net-next 02/15] phy: introduce the PHY_MODE_ETHTOOL mode for phy_set_mode_ext()
In networking, we have 2 distinct data types:
- phy_interface_t describes the link between a MAC (or MAC-side PCS) and
an attached PHY or SFP cage
- enum ethtool_link_mode_bit_indices describes the link between a local
PHY and a remote PHY (for example, gigabit RJ45 twisted copper pairs)
Currently, phy_set_mode_ext(PHY_MODE_ETHERNET) takes arguments of the
phy_interface_t type, and there is no way to pass an argument of the
enum ethtool_link_mode_bit_indices type. The new PHY_MODE_ETHTOOL
intends to address that.
It is true that there is currently some overlap between these data
types, namely:
phy_interface_t enum ethtool_link_mode_bit_indices
-----------------------------------------------------------------
PHY_INTERFACE_MODE_10GKR ETHTOOL_LINK_MODE_10000baseKR_Full_BIT
PHY_INTERFACE_MODE_1000BASEKX ETHTOOL_LINK_MODE_1000baseKX_Full_BIT
but those overlaps were deemed to be mistakes, and PHY-to-PHY link modes
should only be added to ethtool_link_mode_bit_indices going forward.
Thus, I believe that the distinction is necessary, rather than hacking
more improper PHY modes. Some of the PHY-to-PHY link modes which may be
added in the future (to ethtool_link_mode_bit_indices and not to
phy_interface_t) are:
ETHTOOL_LINK_MODE_100000baseKP4_Full_BIT
ETHTOOL_LINK_MODE_100000baseCR10_Full_BIT
ETHTOOL_LINK_MODE_25000baseKR_S_Full_BIT
ETHTOOL_LINK_MODE_25000baseCR_S_Full_BIT
One user of PHY_MODE_ETHTOOL will be the MTIP backplane AN/LT + Lynx
SerDes PHY combo, where the backplane autoneg protocol (IEEE 802.3
clause 73) selects the operating PHY-to-PHY link mode.
There are electrical differences between the PHY-to-PHY backplane link
modes (like ETHTOOL_LINK_MODE_10000baseKR_Full_BIT) and their
non-backplane counterparts (like PHY_INTERFACE_MODE_10GBASER), namely
the number of TX signal equalization taps and their configurability.
This further justifies distinguishing between them in the generic PHY
API.
Signed-off-by: Vladimir Oltean <vladimir.oltean@....com>
---
v1->v2: rename PHY_MODE_ETHERNET_PHY to PHY_MODE_ETHTOOL at Russell's
suggestion
include/linux/phy/phy.h | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/include/linux/phy/phy.h b/include/linux/phy/phy.h
index 6be348f1fa0e..72ef4afcda81 100644
--- a/include/linux/phy/phy.h
+++ b/include/linux/phy/phy.h
@@ -39,6 +39,7 @@ enum phy_mode {
PHY_MODE_UFS_HS_B,
PHY_MODE_PCIE,
PHY_MODE_ETHERNET,
+ PHY_MODE_ETHTOOL,
PHY_MODE_MIPI_DPHY,
PHY_MODE_SATA,
PHY_MODE_LVDS,
@@ -52,7 +53,7 @@ enum phy_media {
};
enum phy_status_type {
- /* Valid for PHY_MODE_ETHERNET */
+ /* Valid for PHY_MODE_ETHERNET and PHY_MODE_ETHTOOL */
PHY_STATUS_CDR_LOCK,
};
--
2.34.1
Powered by blists - more mailing lists