[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20230924182548.580dc03f@jic23-huawei>
Date: Sun, 24 Sep 2023 18:25:48 +0100
From: Jonathan Cameron <jic23@...nel.org>
To: David Lechner <dlechner@...libre.com>
Cc: linux-iio@...r.kernel.org, devicetree@...r.kernel.org,
linux-staging@...ts.linux.dev, linux-kernel@...r.kernel.org,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Conor Dooley <conor+dt@...nel.org>,
Michael Hennerich <Michael.Hennerich@...log.com>,
Nuno Sá <nuno.sa@...log.com>,
Axel Haslam <ahaslam@...libre.com>,
Philip Molloy <pmolloy@...libre.com>
Subject: Re: [PATCH v2 05/19] staging: iio: resolver: ad2s1210: fix probe
On Thu, 21 Sep 2023 09:43:46 -0500
David Lechner <dlechner@...libre.com> wrote:
> This fixes a number of issues in the ad2s1210_probe() function:
> - Move call to ad2s1210_setup_gpios() after `st->sdev = spi;`. This
> fixes use of this pointer before it is initialized.
> - Check return value on ad2s1210_initial().
Should mention moving it as well.
> - Move devm_iio_device_register() to the end to avoid race of
> registering before fully initialized.
> - Remove call to spi_setup(). Note: MODE_3 was incorrect, it should be
> MODE_1 but we can let the device tree select this.
> - Change default value for fclkin. This is an external oscillator, not
> the SPI bus clock. (Will use device tree to get the correct value
> in a future patch. For now, using the eval board value.)
> - Remove spi_set_drvdata().
Hmm. This is a lot of different things. I'd prefer it more split up
as a few of these are not completely trivial.
>
> Signed-off-by: David Lechner <dlechner@...libre.com>
I think the patch split up broke on this one...
> ---
> drivers/staging/iio/resolver/ad2s1210.c | 30 ++++++++++++-------------
> 1 file changed, 15 insertions(+), 15 deletions(-)
>
> diff --git a/drivers/staging/iio/resolver/ad2s1210.c b/drivers/staging/iio/resolver/ad2s1210.c
> index 0bdd5a30d45d..9c7f76114360 100644
> --- a/drivers/staging/iio/resolver/ad2s1210.c
> +++ b/drivers/staging/iio/resolver/ad2s1210.c
> @@ -3,6 +3,7 @@
> * ad2s1210.c support for the ADI Resolver to Digital Converters: AD2S1210
> *
> * Copyright (c) 2010-2010 Analog Devices Inc.
> + * Copyright (C) 2023 BayLibre, SAS
Bit early to justify that, but I'm fine with it anyway as it will soon
be justified!
> */
> #include <linux/types.h>
> #include <linux/mutex.h>
> @@ -657,12 +658,8 @@ static int ad2s1210_probe(struct spi_device *spi)
> indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*st));
> if (!indio_dev)
> return -ENOMEM;
> - st = iio_priv(indio_dev);
> - ret = ad2s1210_setup_gpios(st);
> - if (ret < 0)
> - return ret;
>
> - spi_set_drvdata(spi, indio_dev);
Looks fine, but unconnected to the rest of this patch.
> + st = iio_priv(indio_dev);
>
> mutex_init(&st->lock);
> st->sdev = spi;
> @@ -671,22 +668,25 @@ static int ad2s1210_probe(struct spi_device *spi)
> st->resolution = 12;
> st->fexcit = AD2S1210_DEF_EXCIT;
>
> + ret = ad2s1210_setup_clocks(st);
doesn't exist yet.
> + if (ret < 0)
> + return ret;
> +
> + ret = ad2s1210_setup_gpios(st);
> + if (ret < 0)
> + return ret;
> +
> + ret = ad2s1210_initial(st);
> + if (ret < 0)
> + return ret;
> +
> indio_dev->info = &ad2s1210_info;
> indio_dev->modes = INDIO_DIRECT_MODE;
> indio_dev->channels = ad2s1210_channels;
> indio_dev->num_channels = ARRAY_SIZE(ad2s1210_channels);
> indio_dev->name = spi_get_device_id(spi)->name;
>
> - ret = devm_iio_device_register(&spi->dev, indio_dev);
> - if (ret)
> - return ret;
> -
> - st->fclkin = spi->max_speed_hz;
> - spi->mode = SPI_MODE_3;
> - spi_setup(spi);
> - ad2s1210_initial(st);
> -
> - return 0;
> + return devm_iio_device_register(&spi->dev, indio_dev);
> }
>
> static const struct of_device_id ad2s1210_of_match[] = {
Powered by blists - more mailing lists