| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20230924183914.51414-4-krzysztof.kozlowski@linaro.org>
Date: Sun, 24 Sep 2023 20:39:14 +0200
From: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
To: Andy Gross <agross@...nel.org>,
Bjorn Andersson <andersson@...nel.org>,
Konrad Dybcio <konrad.dybcio@...aro.org>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Conor Dooley <conor+dt@...nel.org>,
Neil Armstrong <neil.armstrong@...aro.org>,
Stephen Boyd <sboyd@...eaurora.org>,
linux-arm-msm@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org
Cc: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
Subject: [RESEND PATCH 4/4] ARM: dts: qcom: ipq8064: move keys and leds out of soc node
GPIO keys and LEDs are not part of the SoC, so move them to top-level to
fix dtbs_check warnings like:
qcom-ipq8064-rb3011.dtb: soc: gpio-keys: {'compatible': ['gpio-keys'], ... should not be valid under {'type': 'object'}
from schema $id: http://devicetree.org/schemas/simple-bus.yaml#
Reviewed-by: Konrad Dybcio <konrad.dybcio@...aro.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
---
.../arm/boot/dts/qcom/qcom-ipq8064-rb3011.dts | 55 ++++----
arch/arm/boot/dts/qcom/qcom-ipq8064-v1.0.dtsi | 122 +++++++++---------
2 files changed, 88 insertions(+), 89 deletions(-)
diff --git a/arch/arm/boot/dts/qcom/qcom-ipq8064-rb3011.dts b/arch/arm/boot/dts/qcom/qcom-ipq8064-rb3011.dts
index 1796ded31d17..12e806adcda8 100644
--- a/arch/arm/boot/dts/qcom/qcom-ipq8064-rb3011.dts
+++ b/arch/arm/boot/dts/qcom/qcom-ipq8064-rb3011.dts
@@ -20,6 +20,33 @@ chosen {
stdout-path = "serial0:115200n8";
};
+ gpio-keys {
+ compatible = "gpio-keys";
+ pinctrl-0 = <&buttons_pins>;
+ pinctrl-names = "default";
+
+ button {
+ label = "reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&qcom_pinmux 66 GPIO_ACTIVE_LOW>;
+ linux,input-type = <1>;
+ debounce-interval = <60>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-0 = <&leds_pins>;
+ pinctrl-names = "default";
+
+ led-0 {
+ label = "rb3011:green:user";
+ color = <LED_COLOR_ID_GREEN>;
+ gpios = <&qcom_pinmux 33 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+ };
+
memory@...00000 {
reg = <0x42000000 0x3e000000>;
device_type = "memory";
@@ -302,34 +329,6 @@ partition@0 {
};
};
};
-
- gpio-keys {
- compatible = "gpio-keys";
- pinctrl-0 = <&buttons_pins>;
- pinctrl-names = "default";
-
- button {
- label = "reset";
- linux,code = <KEY_RESTART>;
- gpios = <&qcom_pinmux 66 GPIO_ACTIVE_LOW>;
- linux,input-type = <1>;
- debounce-interval = <60>;
- };
- };
-
- leds {
- compatible = "gpio-leds";
- pinctrl-0 = <&leds_pins>;
- pinctrl-names = "default";
-
- led-0 {
- label = "rb3011:green:user";
- color = <LED_COLOR_ID_GREEN>;
- gpios = <&qcom_pinmux 33 GPIO_ACTIVE_HIGH>;
- default-state = "off";
- };
- };
-
};
};
diff --git a/arch/arm/boot/dts/qcom/qcom-ipq8064-v1.0.dtsi b/arch/arm/boot/dts/qcom/qcom-ipq8064-v1.0.dtsi
index 17f65e140e02..49de9752632f 100644
--- a/arch/arm/boot/dts/qcom/qcom-ipq8064-v1.0.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-ipq8064-v1.0.dtsi
@@ -14,6 +14,67 @@ chosen {
stdout-path = "serial0:115200n8";
};
+ gpio-keys {
+ compatible = "gpio-keys";
+ pinctrl-0 = <&buttons_pins>;
+ pinctrl-names = "default";
+
+ button-1 {
+ label = "reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>;
+ linux,input-type = <1>;
+ debounce-interval = <60>;
+ };
+ button-2 {
+ label = "wps";
+ linux,code = <KEY_WPS_BUTTON>;
+ gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>;
+ linux,input-type = <1>;
+ debounce-interval = <60>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-0 = <&leds_pins>;
+ pinctrl-names = "default";
+
+ led-0 {
+ label = "led_usb1";
+ gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "usbdev";
+ default-state = "off";
+ };
+
+ led-1 {
+ label = "led_usb3";
+ gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "usbdev";
+ default-state = "off";
+ };
+
+ led-2 {
+ label = "status_led_fail";
+ function = LED_FUNCTION_STATUS;
+ gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ led-3 {
+ label = "sata_led";
+ gpios = <&qcom_pinmux 26 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ led-4 {
+ label = "status_led_pass";
+ function = LED_FUNCTION_STATUS;
+ gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+ };
+
soc {
gsbi@...00000 {
qcom,mode = <GSBI_PROT_I2C_UART>;
@@ -64,66 +125,5 @@ sata@...00000 {
ports-implemented = <0x1>;
status = "okay";
};
-
- gpio-keys {
- compatible = "gpio-keys";
- pinctrl-0 = <&buttons_pins>;
- pinctrl-names = "default";
-
- button-1 {
- label = "reset";
- linux,code = <KEY_RESTART>;
- gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>;
- linux,input-type = <1>;
- debounce-interval = <60>;
- };
- button-2 {
- label = "wps";
- linux,code = <KEY_WPS_BUTTON>;
- gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>;
- linux,input-type = <1>;
- debounce-interval = <60>;
- };
- };
-
- leds {
- compatible = "gpio-leds";
- pinctrl-0 = <&leds_pins>;
- pinctrl-names = "default";
-
- led-0 {
- label = "led_usb1";
- gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "usbdev";
- default-state = "off";
- };
-
- led-1 {
- label = "led_usb3";
- gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "usbdev";
- default-state = "off";
- };
-
- led-2 {
- label = "status_led_fail";
- function = LED_FUNCTION_STATUS;
- gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>;
- default-state = "off";
- };
-
- led-3 {
- label = "sata_led";
- gpios = <&qcom_pinmux 26 GPIO_ACTIVE_HIGH>;
- default-state = "off";
- };
-
- led-4 {
- label = "status_led_pass";
- function = LED_FUNCTION_STATUS;
- gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>;
- default-state = "off";
- };
- };
};
};
--
2.34.1
Powered by blists - more mailing lists