[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20230925204913.3776656-1-Frank.Li@nxp.com>
Date: Mon, 25 Sep 2023 16:49:06 -0400
From: Frank Li <Frank.Li@....com>
To: frank.li@....com, shawnguo@...nel.org
Cc: clin@...e.com, conor+dt@...nel.org, devicetree@...r.kernel.org,
eagle.zhou@....com, festevam@...il.com, imx@...ts.linux.dev,
joy.zou@....com, kernel@...gutronix.de,
krzysztof.kozlowski+dt@...aro.org, leoyang.li@....com,
linux-arm-kernel@...ts.infradead.org, linux-imx@....com,
linux-kernel@...r.kernel.org, pierre.gondois@....com,
robh+dt@...nel.org, s.hauer@...gutronix.de, shenwei.wang@....com,
sherry.sun@....com
Subject: [PATCH v2 0/7] arm64: dts: imx8qxp add emda support
eDMAv3 patch was accepted.
https://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine.git/log/?h=next
This is dts parts.
Add 8qxp edma support and enable lpuart1..3 dma support.
Change from v1 to v2
- rebase scu-pd.c to 6.6rc1
- change "F" to "f"
- Add 8qm edma dts change.
- Add lpuart0 dma setting (console tty will disable dma)
Frank Li (7):
genpd: imx: scu-pd: fixed dma2-ch domain defination
arm64: dts: imx8: add edma[0..3]
arm64: dts: imx8: add edma for uart[0..3]
arm64: dts: imx8qm: Update edma channel for uart[0..3]
arm64: dts: imx8: update lpuart[0..3] irq number
arm64: dts: imx8qxp-mek: enable 8qxp lpuart2 and lpuart3
arm64: dts: imx8qm-mek: enable 8qm lpuart2 and lpuart3
.../boot/dts/freescale/imx8-ss-audio.dtsi | 88 +++++++++++++++++++
.../arm64/boot/dts/freescale/imx8-ss-dma.dtsi | 78 +++++++++++++++-
.../boot/dts/freescale/imx8dxl-ss-adma.dtsi | 30 +++++++
arch/arm64/boot/dts/freescale/imx8qm-mek.dts | 26 ++++++
.../boot/dts/freescale/imx8qm-ss-dma.dtsi | 56 ++++++++++++
arch/arm64/boot/dts/freescale/imx8qxp-mek.dts | 26 ++++++
drivers/genpd/imx/scu-pd.c | 3 +-
7 files changed, 302 insertions(+), 5 deletions(-)
--
2.34.1
Powered by blists - more mailing lists