[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <169562679800.286677.6236841313565579111.robh@kernel.org>
Date: Mon, 25 Sep 2023 02:26:38 -0500
From: Rob Herring <robh@...nel.org>
To: Devi Priya <quic_devipriy@...cinc.com>
Cc: devicetree@...r.kernel.org, agross@...nel.org,
linux-arm-msm@...r.kernel.org, linux-pwm@...r.kernel.org,
andersson@...nel.org, thierry.reding@...il.com,
u.kleine-koenig@...gutronix.de, ndesaulniers@...gle.com,
nathan@...nel.org, konrad.dybcio@...aro.org, conor+dt@...nel.org,
baruch@...s.co.il, robh+dt@...nel.org,
linux-kernel@...r.kernel.org, trix@...hat.com,
krzysztof.kozlowski+dt@...aro.org, llvm@...ts.linux.dev
Subject: Re: [PATCH V12 2/3] dt-bindings: pwm: add IPQ6018 binding
On Mon, 25 Sep 2023 12:29:14 +0530, Devi Priya wrote:
> DT binding for the PWM block in Qualcomm IPQ6018 SoC.
>
> Reviewed-by: Bjorn Andersson <bjorn.andersson@...aro.org>
> Co-developed-by: Baruch Siach <baruch.siach@...lu.com>
> Signed-off-by: Baruch Siach <baruch.siach@...lu.com>
> Signed-off-by: Devi Priya <quic_devipriy@...cinc.com>
> ---
> v12:
>
> Picked up the R-b tag
>
> v11:
>
> No change
>
> v10:
>
> No change
>
> v9:
>
> Add 'ranges' property to example (Rob)
>
> Drop label in example (Rob)
>
> v8:
>
> Add size cell to 'reg' (Rob)
>
> v7:
>
> Use 'reg' instead of 'offset' (Rob)
>
> Drop 'clock-names' and 'assigned-clock*' (Bjorn)
>
> Use single cell address/size in example node (Bjorn)
>
> Move '#pwm-cells' lower in example node (Bjorn)
>
> List 'reg' as required
>
> v6:
>
> Device node is child of TCSR; remove phandle (Rob Herring)
>
> Add assigned-clocks/assigned-clock-rates (Uwe Kleine-König)
>
> v5: Use qcom,pwm-regs for phandle instead of direct regs (Bjorn
> Andersson, Kathiravan T)
>
> v4: Update the binding example node as well (Rob Herring's bot)
>
> v3: s/qcom,pwm-ipq6018/qcom,ipq6018-pwm/ (Rob Herring)
>
> v2: Make #pwm-cells const (Rob Herring)
>
> .../devicetree/bindings/pwm/ipq-pwm.yaml | 53 +++++++++++++++++++
> 1 file changed, 53 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/pwm/ipq-pwm.yaml
>
My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):
yamllint warnings/errors:
dtschema/dtc warnings/errors:
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/pwm/ipq-pwm.example.dtb: syscon@...7000: compatible: ['qcom,tcsr-ipq6018', 'syscon', 'simple-mfd'] is too long
from schema $id: http://devicetree.org/schemas/mfd/qcom,tcsr.yaml#
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/pwm/ipq-pwm.example.dtb: syscon@...7000: '#address-cells', '#size-cells', 'pwm@...0', 'ranges' do not match any of the regexes: 'pinctrl-[0-9]+'
from schema $id: http://devicetree.org/schemas/mfd/qcom,tcsr.yaml#
doc reference errors (make refcheckdocs):
See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20230925065915.3467964-3-quic_devipriy@quicinc.com
The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.
If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:
pip3 install dtschema --upgrade
Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.
Powered by blists - more mailing lists