[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <20230925102826.405446-1-quic_gokulsri@quicinc.com>
Date: Mon, 25 Sep 2023 15:58:23 +0530
From: Gokul Sriram Palanisamy <quic_gokulsri@...cinc.com>
To: <dmitry.baryshkov@...aro.org>, <agross@...nel.org>,
<andersson@...nel.org>, <konrad.dybcio@...aro.org>,
<mturquette@...libre.com>, <sboyd@...nel.org>,
<robh+dt@...nel.org>, <krzysztof.kozlowski+dt@...aro.org>,
<jassisinghbrar@...il.com>, <linux-arm-msm@...r.kernel.org>,
<linux-clk@...r.kernel.org>, <devicetree@...r.kernel.org>,
<linux-kernel@...r.kernel.org>
CC: <quic_varada@...cinc.com>, <quic_srichara@...cinc.com>,
<quic_gokulsri@...cinc.com>
Subject: [PATCH V3 0/3] Add APSS clock driver support for IPQ5018
This series adds support for the APSS clock to bump the CPU frequency
above 800MHz. APSS PLL found in the IPQ5018 is of type Stromer.
- The first patch in the series adds the required a53pll compatible.
- The second patch reuses Stormer Plus PLL offsets, adds configuration values
for Stromer.
- The third patch adds dts nodes to enable the pll along with the cpu
operating frequency table.
This series depends on below series
https://patchwork.kernel.org/project/linux-arm-msm/cover/20230913-gpll_cleanup-v2-0-c8ceb1a37680@quicinc.com/
Changes in v3:
- Addressed review comment by Dmitry in patch 3.
Changes in v2:
- Addressed review comments
- Adds dependency on above mentioned patch series for dropping
CLK_SET_RATE_PARENT flag from GPLL clocks, GPLL0 clock provider for
mailbox
- Add CPU operating point at 800MHz based on the review comments.
Gokul Sriram Palanisamy (3):
dt-bindings: clock: qcom,a53pll: add IPQ5018 compatible
clk: qcom: apss-ipq-pll: add support for IPQ5018
arm64: dts: qcom: ipq5018: enable the CPUFreq support
.../bindings/clock/qcom,a53pll.yaml | 1 +
arch/arm64/boot/dts/qcom/ipq5018.dtsi | 40 +++++++++++++++++++
drivers/clk/qcom/apss-ipq-pll.c | 21 ++++++++++
3 files changed, 62 insertions(+)
--
2.34.1
Powered by blists - more mailing lists