| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20230925135326.1689396-1-jbrunet@baylibre.com>
Date: Mon, 25 Sep 2023 15:53:26 +0200
From: Jerome Brunet <jbrunet@...libre.com>
To: Neil Armstrong <neil.armstrong@...aro.org>,
Kevin Hilman <khilman@...libre.com>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Rob Herring <robh+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>
Cc: Jerome Brunet <jbrunet@...libre.com>, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-amlogic@...ts.infradead.org
Subject: [PATCH] arm64: dts: meson: g12: name spdifout consistently
g12 and sm1 are fairly similar when it comes to audio.
Both have 2 spdif outputs. While the 2nd output is named "spdifout_b" for
both, the 1st one is named 'spdifout' for g12 and 'spdifout_a' for sm1.
Use 'spdifout_a' for both instead.
This change does not fix any particular problem. The intent is just to make
it easier to have a common card definitions for platform designs using both
SoC families, when spdifout is used.
Signed-off-by: Jerome Brunet <jbrunet@...libre.com>
---
arch/arm64/boot/dts/amlogic/meson-g12.dtsi | 4 ++--
arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts | 10 +++++-----
arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts | 10 +++++-----
arch/arm64/boot/dts/amlogic/meson-g12b-gtking.dts | 10 +++++-----
arch/arm64/boot/dts/amlogic/meson-g12b-ugoos-am6.dts | 10 +++++-----
5 files changed, 22 insertions(+), 22 deletions(-)
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12.dtsi
index eb442aaf57e4..e732df3f3114 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-g12.dtsi
@@ -268,12 +268,12 @@ spdifin: audio-controller@400 {
status = "disabled";
};
- spdifout: audio-controller@480 {
+ spdifout_a: audio-controller@480 {
compatible = "amlogic,g12a-spdifout",
"amlogic,axg-spdifout";
reg = <0x0 0x480 0x0 0x50>;
#sound-dai-cells = <0>;
- sound-name-prefix = "SPDIFOUT";
+ sound-name-prefix = "SPDIFOUT_A";
clocks = <&clkc_audio AUD_CLKID_SPDIFOUT>,
<&clkc_audio AUD_CLKID_SPDIFOUT_CLK>;
clock-names = "pclk", "mclk";
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts b/arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts
index 7310e192efe7..8355ddd7e9ae 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts
@@ -189,9 +189,9 @@ sound {
"TDMOUT_C IN 1", "FRDDR_B OUT 2",
"TDMOUT_C IN 2", "FRDDR_C OUT 2",
"TDM_C Playback", "TDMOUT_C OUT",
- "SPDIFOUT IN 0", "FRDDR_A OUT 3",
- "SPDIFOUT IN 1", "FRDDR_B OUT 3",
- "SPDIFOUT IN 2", "FRDDR_C OUT 3",
+ "SPDIFOUT_A IN 0", "FRDDR_A OUT 3",
+ "SPDIFOUT_A IN 1", "FRDDR_B OUT 3",
+ "SPDIFOUT_A IN 2", "FRDDR_C OUT 3",
"SPDIFOUT_B IN 0", "FRDDR_A OUT 4",
"SPDIFOUT_B IN 1", "FRDDR_B OUT 4",
"SPDIFOUT_B IN 2", "FRDDR_C OUT 4",
@@ -324,7 +324,7 @@ codec-1 {
/* spdif hdmi and coax output */
dai-link-9 {
- sound-dai = <&spdifout>;
+ sound-dai = <&spdifout_a>;
codec-0 {
sound-dai = <&spdif_dit>;
@@ -546,7 +546,7 @@ &spdifin {
status = "okay";
};
-&spdifout {
+&spdifout_a {
pinctrl-0 = <&spdif_ao_out_pins>;
pinctrl-names = "default";
status = "okay";
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts b/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts
index 7ca904f5acbb..4969a76460fa 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts
@@ -155,9 +155,9 @@ sound {
"TDMOUT_B IN 1", "FRDDR_B OUT 1",
"TDMOUT_B IN 2", "FRDDR_C OUT 1",
"TDM_B Playback", "TDMOUT_B OUT",
- "SPDIFOUT IN 0", "FRDDR_A OUT 3",
- "SPDIFOUT IN 1", "FRDDR_B OUT 3",
- "SPDIFOUT IN 2", "FRDDR_C OUT 3";
+ "SPDIFOUT_A IN 0", "FRDDR_A OUT 3",
+ "SPDIFOUT_A IN 1", "FRDDR_B OUT 3",
+ "SPDIFOUT_A IN 2", "FRDDR_C OUT 3";
assigned-clocks = <&clkc CLKID_MPLL2>,
<&clkc CLKID_MPLL0>,
@@ -196,7 +196,7 @@ codec {
/* spdif hdmi or toslink interface */
dai-link-4 {
- sound-dai = <&spdifout>;
+ sound-dai = <&spdifout_a>;
codec-0 {
sound-dai = <&spdif_dit>;
@@ -456,7 +456,7 @@ &sd_emmc_c {
vqmmc-supply = <&flash_1v8>;
};
-&spdifout {
+&spdifout_a {
pinctrl-0 = <&spdif_out_h_pins>;
pinctrl-names = "default";
status = "okay";
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-gtking.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-gtking.dts
index 3e826095e792..8fc2e143cb54 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12b-gtking.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-gtking.dts
@@ -34,9 +34,9 @@ sound {
"TDMOUT_B IN 1", "FRDDR_B OUT 1",
"TDMOUT_B IN 2", "FRDDR_C OUT 1",
"TDM_B Playback", "TDMOUT_B OUT",
- "SPDIFOUT IN 0", "FRDDR_A OUT 3",
- "SPDIFOUT IN 1", "FRDDR_B OUT 3",
- "SPDIFOUT IN 2", "FRDDR_C OUT 3";
+ "SPDIFOUT_A IN 0", "FRDDR_A OUT 3",
+ "SPDIFOUT_A IN 1", "FRDDR_B OUT 3",
+ "SPDIFOUT_A IN 2", "FRDDR_C OUT 3";
assigned-clocks = <&clkc CLKID_MPLL2>,
<&clkc CLKID_MPLL0>,
@@ -75,7 +75,7 @@ codec {
/* spdif hdmi or toslink interface */
dai-link-4 {
- sound-dai = <&spdifout>;
+ sound-dai = <&spdifout_a>;
codec-0 {
sound-dai = <&spdif_dit>;
@@ -139,7 +139,7 @@ rtc: rtc@51 {
};
};
-&spdifout {
+&spdifout_a {
pinctrl-0 = <&spdif_out_h_pins>;
pinctrl-names = "default";
status = "okay";
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-ugoos-am6.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-ugoos-am6.dts
index 098a3af6d381..ce548b373296 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12b-ugoos-am6.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-ugoos-am6.dts
@@ -29,9 +29,9 @@ sound {
"TDMOUT_B IN 1", "FRDDR_B OUT 1",
"TDMOUT_B IN 2", "FRDDR_C OUT 1",
"TDM_B Playback", "TDMOUT_B OUT",
- "SPDIFOUT IN 0", "FRDDR_A OUT 3",
- "SPDIFOUT IN 1", "FRDDR_B OUT 3",
- "SPDIFOUT IN 2", "FRDDR_C OUT 3";
+ "SPDIFOUT_A IN 0", "FRDDR_A OUT 3",
+ "SPDIFOUT_A IN 1", "FRDDR_B OUT 3",
+ "SPDIFOUT_A IN 2", "FRDDR_C OUT 3";
assigned-clocks = <&clkc CLKID_MPLL2>,
<&clkc CLKID_MPLL0>,
@@ -70,7 +70,7 @@ codec {
/* spdif hdmi or toslink interface */
dai-link-4 {
- sound-dai = <&spdifout>;
+ sound-dai = <&spdifout_a>;
codec-0 {
sound-dai = <&spdif_dit>;
@@ -125,7 +125,7 @@ &ir {
linux,rc-map-name = "rc-khadas";
};
-&spdifout {
+&spdifout_a {
pinctrl-0 = <&spdif_out_h_pins>;
pinctrl-names = "default";
status = "okay";
--
2.40.1
Powered by blists - more mailing lists