lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <jmq54bskx4zd75ay4kf5pcdo6wnz72pxzfo5ivevleef4scucr@uw4fkfs64f3c>
Date:   Tue, 26 Sep 2023 13:55:23 +0300
From:   Serge Semin <fancer.lancer@...il.com>
To:     Choong Yong Liang <yong.liang.choong@...ux.intel.com>
Cc:     Rajneesh Bhardwaj <irenic.rajneesh@...il.com>,
        David E Box <david.e.box@...ux.intel.com>,
        Hans de Goede <hdegoede@...hat.com>,
        Mark Gross <markgross@...nel.org>,
        Jose Abreu <Jose.Abreu@...opsys.com>,
        Andrew Lunn <andrew@...n.ch>,
        Heiner Kallweit <hkallweit1@...il.com>,
        Russell King <linux@...linux.org.uk>,
        "David S . Miller" <davem@...emloft.net>,
        Eric Dumazet <edumazet@...gle.com>,
        Jakub Kicinski <kuba@...nel.org>,
        Paolo Abeni <pabeni@...hat.com>,
        Marek BehĂșn <kabel@...nel.org>,
        Jean Delvare <jdelvare@...e.com>,
        Guenter Roeck <linux@...ck-us.net>,
        Giuseppe Cavallaro <peppe.cavallaro@...com>,
        Alexandre Torgue <alexandre.torgue@...s.st.com>,
        Jose Abreu <joabreu@...opsys.com>,
        Maxime Coquelin <mcoquelin.stm32@...il.com>,
        Richard Cochran <richardcochran@...il.com>,
        Philipp Zabel <p.zabel@...gutronix.de>,
        Alexei Starovoitov <ast@...nel.org>,
        Daniel Borkmann <daniel@...earbox.net>,
        Jesper Dangaard Brouer <hawk@...nel.org>,
        John Fastabend <john.fastabend@...il.com>,
        Wong Vee Khee <veekhee@...le.com>,
        Jon Hunter <jonathanh@...dia.com>,
        Jesse Brandeburg <jesse.brandeburg@...el.com>,
        Revanth Kumar Uppala <ruppala@...dia.com>,
        Shenwei Wang <shenwei.wang@....com>,
        Andrey Konovalov <andrey.konovalov@...aro.org>,
        Jochen Henneberg <jh@...neberg-systemdesign.com>,
        David E Box <david.e.box@...el.com>,
        Andrew Halaney <ahalaney@...hat.com>,
        Simon Horman <simon.horman@...igine.com>,
        Bartosz Golaszewski <bartosz.golaszewski@...aro.org>,
        netdev@...r.kernel.org, linux-kernel@...r.kernel.org,
        linux-stm32@...md-mailman.stormreply.com,
        linux-arm-kernel@...ts.infradead.org,
        platform-driver-x86@...r.kernel.org, linux-hwmon@...r.kernel.org,
        bpf@...r.kernel.org, Voon Wei Feng <weifeng.voon@...el.com>,
        Tan Tee Min <tee.min.tan@...ux.intel.com>,
        Michael Sit Wei Hong <michael.wei.hong.sit@...el.com>,
        Lai Peter Jun Ann <jun.ann.lai@...el.com>
Subject: Re: [PATCH net-next v3 4/5] net: stmmac: enable Intel mGbE 1G/2.5G
 auto-negotiation support

On Thu, Sep 21, 2023 at 08:19:45PM +0800, Choong Yong Liang wrote:
> From: "Tan, Tee Min" <tee.min.tan@...ux.intel.com>
> 
> Initially, Intel mGbE was only able to configure the overclocking of 2.5
> times clock rate to enable 2.5Gbps in the BIOS during boot time. Kernel
> driver had no access to modify the clock rate for 1G/2.5G mode at runtime.
> 
> Now, this patch enables the runtime 1G/2.5G auto-negotiation support to
> gets rid of the dependency on BIOS to change the 1G/2.5G clock rate.
> 
> This patch adds several new functions below:-
> - intel_tsn_interface_is_available(): This new function reads FIA lane
>   ownership registers and common lane registers through IPC commands
>   to know which lane the mGbE port is assigned to.
> - stmmac_mac_prepare(): To obtain the latest PHY interface from phylink
>   during initialization and call intel_config_serdes() to proceed with
>   SERDES configuration.
> - intel_config_serdes(): To configure the SERDES based on the assigned
>   lane and latest PHY interface, it sends IPC command to the PMC through
>   PMC driver/API. The PMC acts as a proxy for R/W on behalf of the driver.
> - intel_set_reg_access(): Set the register access to the available TSN
>   interface.
> 
> Signed-off-by: Tan, Tee Min <tee.min.tan@...ux.intel.com>
> Signed-off-by: Choong Yong Liang <yong.liang.choong@...ux.intel.com>
> ---
>  drivers/net/ethernet/stmicro/stmmac/Kconfig   |   1 +
>  .../net/ethernet/stmicro/stmmac/dwmac-intel.c | 134 +++++++++++++++++-
>  .../net/ethernet/stmicro/stmmac/dwmac-intel.h |  79 +++++++++++
>  .../net/ethernet/stmicro/stmmac/stmmac_main.c |  20 +++
>  include/linux/stmmac.h                        |   1 +
>  5 files changed, 231 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/net/ethernet/stmicro/stmmac/Kconfig b/drivers/net/ethernet/stmicro/stmmac/Kconfig
> index a2b9e289aa36..4340efd9bd50 100644
> --- a/drivers/net/ethernet/stmicro/stmmac/Kconfig
> +++ b/drivers/net/ethernet/stmicro/stmmac/Kconfig
> @@ -273,6 +273,7 @@ config DWMAC_INTEL
>  	default X86
>  	depends on X86 && STMMAC_ETH && PCI
>  	depends on COMMON_CLK
> +	select INTEL_PMC_IPC
>  	help
>  	  This selects the Intel platform specific bus support for the
>  	  stmmac driver. This driver is used for Intel Quark/EHL/TGL.
> diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-intel.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-intel.c
> index a3a249c63598..a211f42914a2 100644
> --- a/drivers/net/ethernet/stmicro/stmmac/dwmac-intel.c
> +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-intel.c
> @@ -5,6 +5,7 @@
>  #include <linux/clk-provider.h>
>  #include <linux/pci.h>
>  #include <linux/dmi.h>
> +#include <linux/platform_data/x86/intel_pmc_ipc.h>
>  #include "dwmac-intel.h"
>  #include "dwmac4.h"
>  #include "stmmac.h"
> @@ -14,6 +15,9 @@ struct intel_priv_data {
>  	int mdio_adhoc_addr;	/* mdio address for serdes & etc */
>  	unsigned long crossts_adj;
>  	bool is_pse;
> +	const int *tsn_lane_registers;
> +	int max_tsn_lane_registers;
> +	int pid_modphy;
>  };
>  
>  /* This struct is used to associate PCI Function of MAC controller on a board,
> @@ -93,7 +97,7 @@ static int intel_serdes_powerup(struct net_device *ndev, void *priv_data)
>  	data &= ~SERDES_RATE_MASK;
>  	data &= ~SERDES_PCLK_MASK;
>  
> -	if (priv->plat->max_speed == 2500)
> +	if (priv->plat->phy_interface == PHY_INTERFACE_MODE_2500BASEX)
>  		data |= SERDES_RATE_PCIE_GEN2 << SERDES_RATE_PCIE_SHIFT |
>  			SERDES_PCLK_37p5MHZ << SERDES_PCLK_SHIFT;
>  	else
> @@ -414,6 +418,106 @@ static void intel_mgbe_pse_crossts_adj(struct intel_priv_data *intel_priv,
>  	}
>  }
>  
> +#if IS_ENABLED(CONFIG_INTEL_PMC_IPC)
> +static bool intel_tsn_interface_is_available(struct net_device *ndev,
> +					     struct intel_priv_data *intel_priv)
> +{
> +	struct stmmac_priv *priv = netdev_priv(ndev);
> +	struct pmc_ipc_cmd tmp = {0};
> +	u32 rbuf[4] = {0};
> +	int ret, i, j;
> +
> +	if (priv->plat->serdes_powerup) {
> +		tmp.cmd = IPC_SOC_REGISTER_ACCESS;
> +		tmp.sub_cmd = IPC_SOC_SUB_CMD_READ;
> +
> +		for (i = 0; i < 5; i++) {
> +			tmp.wbuf[0] = R_PCH_FIA_15_PCR_LOS1_REG_BASE + i;
> +
> +			ret = intel_pmc_ipc(&tmp, rbuf);
> +			if (ret < 0) {
> +				netdev_info(priv->dev,
> +					    "Failed to read from PMC.\n");
> +				return false;
> +			}
> +
> +			for (j = 0; j <= intel_priv->max_tsn_lane_registers; j++)
> +				if ((rbuf[0] >>
> +				    (4 * (intel_priv->tsn_lane_registers[j] % 8)) &
> +				     B_PCH_FIA_PCR_L0O) == 0xB)
> +					return true;
> +		}
> +	}
> +	return false;
> +}
> +
> +static int intel_set_reg_access(const struct pmc_serdes_regs *regs, int max_regs)
> +{
> +	int ret = 0, i;
> +
> +	for (i = 0; i < max_regs; i++) {
> +		struct pmc_ipc_cmd tmp = {0};
> +		u32 buf[4] = {0};
> +
> +		tmp.cmd = IPC_SOC_REGISTER_ACCESS;
> +		tmp.sub_cmd = IPC_SOC_SUB_CMD_WRITE;
> +		tmp.wbuf[0] = (u32)regs[i].index;
> +		tmp.wbuf[1] = regs[i].val;
> +
> +		ret = intel_pmc_ipc(&tmp, buf);
> +		if (ret < 0)
> +			return ret;
> +	}
> +
> +	return ret;
> +}
> +
> +static int intel_config_serdes(struct net_device *ndev, void *intel_data)
> +{
> +	struct intel_priv_data *intel_priv = intel_data;
> +	struct stmmac_priv *priv = netdev_priv(ndev);
> +	int ret = 0;
> +
> +	if (!intel_tsn_interface_is_available(ndev, intel_priv)) {
> +		netdev_info(priv->dev,
> +			    "No TSN interface available to set the registers.\n");
> +		goto pmc_read_error;
> +	}
> +
> +	if (intel_priv->pid_modphy == PID_MODPHY1) {
> +		if (priv->plat->phy_interface == PHY_INTERFACE_MODE_2500BASEX) {
> +			ret = intel_set_reg_access(pid_modphy1_2p5g_regs,
> +						   ARRAY_SIZE(pid_modphy1_2p5g_regs));
> +		} else {
> +			ret = intel_set_reg_access(pid_modphy1_1g_regs,
> +						   ARRAY_SIZE(pid_modphy1_1g_regs));
> +		}
> +	} else {
> +		if (priv->plat->phy_interface == PHY_INTERFACE_MODE_2500BASEX) {
> +			ret = intel_set_reg_access(pid_modphy3_2p5g_regs,
> +						   ARRAY_SIZE(pid_modphy3_2p5g_regs));
> +		} else {
> +			ret = intel_set_reg_access(pid_modphy3_1g_regs,
> +						   ARRAY_SIZE(pid_modphy3_1g_regs));
> +		}
> +	}
> +
> +	if (ret < 0)
> +		goto pmc_read_error;
> +
> +pmc_read_error:
> +	intel_serdes_powerdown(ndev, intel_priv);
> +	intel_serdes_powerup(ndev, intel_priv);
> +
> +	return ret;
> +}
> +#else
> +static int intel_config_serdes(struct net_device *ndev, void *intel_data)
> +{
> +	return -EOPNOTSUPP;
> +}
> +#endif /* CONFIG_INTEL_PMC_IPC */
> +
>  static void common_default_data(struct plat_stmmacenet_data *plat)
>  {
>  	plat->clk_csr = 2;	/* clk_csr_i = 20-35MHz & MDC = clk_csr_i/16 */
> @@ -624,6 +728,8 @@ static int intel_mgbe_common_data(struct pci_dev *pdev,
>  static int ehl_common_data(struct pci_dev *pdev,
>  			   struct plat_stmmacenet_data *plat)
>  {
> +	struct intel_priv_data *intel_priv = plat->bsp_priv;
> +
>  	plat->rx_queues_to_use = 8;
>  	plat->tx_queues_to_use = 8;
>  	plat->flags |= STMMAC_FLAG_USE_PHY_WOL;
> @@ -639,20 +745,28 @@ static int ehl_common_data(struct pci_dev *pdev,
>  	plat->safety_feat_cfg->prtyen = 0;
>  	plat->safety_feat_cfg->tmouten = 0;
>  
> +	intel_priv->tsn_lane_registers = ehl_tsn_lane_registers;
> +	intel_priv->max_tsn_lane_registers = ARRAY_SIZE(ehl_tsn_lane_registers);
> +
>  	return intel_mgbe_common_data(pdev, plat);
>  }
>  
>  static int ehl_sgmii_data(struct pci_dev *pdev,
>  			  struct plat_stmmacenet_data *plat)
>  {
> +	struct intel_priv_data *intel_priv = plat->bsp_priv;
> +
>  	plat->bus_id = 1;
>  	plat->phy_interface = PHY_INTERFACE_MODE_SGMII;
> -	plat->speed_mode_2500 = intel_speed_mode_2500;
> +	plat->max_speed = SPEED_2500;
>  	plat->serdes_powerup = intel_serdes_powerup;
>  	plat->serdes_powerdown = intel_serdes_powerdown;
> +	plat->config_serdes = intel_config_serdes;
>  
>  	plat->clk_ptp_rate = 204800000;
>  
> +	intel_priv->pid_modphy = PID_MODPHY3;
> +
>  	return ehl_common_data(pdev, plat);
>  }
>  
> @@ -705,10 +819,16 @@ static struct stmmac_pci_info ehl_pse0_rgmii1g_info = {
>  static int ehl_pse0_sgmii1g_data(struct pci_dev *pdev,
>  				 struct plat_stmmacenet_data *plat)
>  {
> +	struct intel_priv_data *intel_priv = plat->bsp_priv;
> +
>  	plat->phy_interface = PHY_INTERFACE_MODE_SGMII;
> -	plat->speed_mode_2500 = intel_speed_mode_2500;
> +	plat->max_speed = SPEED_2500;
>  	plat->serdes_powerup = intel_serdes_powerup;
>  	plat->serdes_powerdown = intel_serdes_powerdown;
> +	plat->config_serdes = intel_config_serdes;
> +
> +	intel_priv->pid_modphy = PID_MODPHY1;
> +
>  	return ehl_pse0_common_data(pdev, plat);
>  }
>  
> @@ -746,10 +866,16 @@ static struct stmmac_pci_info ehl_pse1_rgmii1g_info = {
>  static int ehl_pse1_sgmii1g_data(struct pci_dev *pdev,
>  				 struct plat_stmmacenet_data *plat)
>  {
> +	struct intel_priv_data *intel_priv = plat->bsp_priv;
> +
>  	plat->phy_interface = PHY_INTERFACE_MODE_SGMII;
> -	plat->speed_mode_2500 = intel_speed_mode_2500;
> +	plat->max_speed = SPEED_2500;
>  	plat->serdes_powerup = intel_serdes_powerup;
>  	plat->serdes_powerdown = intel_serdes_powerdown;
> +	plat->config_serdes = intel_config_serdes;
> +
> +	intel_priv->pid_modphy = PID_MODPHY1;
> +
>  	return ehl_pse1_common_data(pdev, plat);
>  }
>  
> diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-intel.h b/drivers/net/ethernet/stmicro/stmmac/dwmac-intel.h
> index 0a37987478c1..093eed977ab0 100644
> --- a/drivers/net/ethernet/stmicro/stmmac/dwmac-intel.h
> +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-intel.h
> @@ -50,4 +50,83 @@
>  #define PCH_PTP_CLK_FREQ_19_2MHZ	(GMAC_GPO0)
>  #define PCH_PTP_CLK_FREQ_200MHZ		(0)
>  
> +#define	PID_MODPHY1 0xAA
> +#define	PID_MODPHY3 0xA8
> +
> +#if IS_ENABLED(CONFIG_INTEL_PMC_IPC)
> +struct pmc_serdes_regs {
> +	u8 index;
> +	u32 val;
> +};
> +
> +/* Modphy Register index */
> +#define R_PCH_FIA_15_PCR_LOS1_REG_BASE			8
> +#define R_PCH_FIA_15_PCR_LOS2_REG_BASE			9
> +#define R_PCH_FIA_15_PCR_LOS3_REG_BASE			10
> +#define R_PCH_FIA_15_PCR_LOS4_REG_BASE			11
> +#define R_PCH_FIA_15_PCR_LOS5_REG_BASE			12
> +#define B_PCH_FIA_PCR_L0O				GENMASK(3, 0)
> +#define PID_MODPHY1_B_MODPHY_PCR_LCPLL_DWORD0		13
> +#define PID_MODPHY1_N_MODPHY_PCR_LCPLL_DWORD2		14
> +#define PID_MODPHY1_N_MODPHY_PCR_LCPLL_DWORD7		15
> +#define PID_MODPHY1_N_MODPHY_PCR_LPPLL_DWORD10		16
> +#define PID_MODPHY1_N_MODPHY_PCR_CMN_ANA_DWORD30	17
> +#define PID_MODPHY3_B_MODPHY_PCR_LCPLL_DWORD0		18
> +#define PID_MODPHY3_N_MODPHY_PCR_LCPLL_DWORD2		19
> +#define PID_MODPHY3_N_MODPHY_PCR_LCPLL_DWORD7		20
> +#define PID_MODPHY3_N_MODPHY_PCR_LPPLL_DWORD10		21
> +#define PID_MODPHY3_N_MODPHY_PCR_CMN_ANA_DWORD30	22
> +
> +#define B_MODPHY_PCR_LCPLL_DWORD0_1G		0x46AAAA41
> +#define N_MODPHY_PCR_LCPLL_DWORD2_1G		0x00000139
> +#define N_MODPHY_PCR_LCPLL_DWORD7_1G		0x002A0003
> +#define N_MODPHY_PCR_LPPLL_DWORD10_1G		0x00170008
> +#define N_MODPHY_PCR_CMN_ANA_DWORD30_1G		0x0000D4AC
> +#define B_MODPHY_PCR_LCPLL_DWORD0_2P5G		0x58555551
> +#define N_MODPHY_PCR_LCPLL_DWORD2_2P5G		0x0000012D
> +#define N_MODPHY_PCR_LCPLL_DWORD7_2P5G		0x001F0003
> +#define N_MODPHY_PCR_LPPLL_DWORD10_2P5G		0x00170008
> +#define N_MODPHY_PCR_CMN_ANA_DWORD30_2P5G	0x8200ACAC
> +
> +static const struct pmc_serdes_regs pid_modphy3_1g_regs[] = {
> +	{ PID_MODPHY3_B_MODPHY_PCR_LCPLL_DWORD0,	B_MODPHY_PCR_LCPLL_DWORD0_1G },
> +	{ PID_MODPHY3_N_MODPHY_PCR_LCPLL_DWORD2,	N_MODPHY_PCR_LCPLL_DWORD2_1G },
> +	{ PID_MODPHY3_N_MODPHY_PCR_LCPLL_DWORD7,	N_MODPHY_PCR_LCPLL_DWORD7_1G },
> +	{ PID_MODPHY3_N_MODPHY_PCR_LPPLL_DWORD10,	N_MODPHY_PCR_LPPLL_DWORD10_1G },
> +	{ PID_MODPHY3_N_MODPHY_PCR_CMN_ANA_DWORD30,	N_MODPHY_PCR_CMN_ANA_DWORD30_1G },
> +	{}
> +};
> +
> +static const struct pmc_serdes_regs pid_modphy3_2p5g_regs[] = {
> +	{ PID_MODPHY3_B_MODPHY_PCR_LCPLL_DWORD0,	B_MODPHY_PCR_LCPLL_DWORD0_2P5G },
> +	{ PID_MODPHY3_N_MODPHY_PCR_LCPLL_DWORD2,	N_MODPHY_PCR_LCPLL_DWORD2_2P5G },
> +	{ PID_MODPHY3_N_MODPHY_PCR_LCPLL_DWORD7,	N_MODPHY_PCR_LCPLL_DWORD7_2P5G },
> +	{ PID_MODPHY3_N_MODPHY_PCR_LPPLL_DWORD10,	N_MODPHY_PCR_LPPLL_DWORD10_2P5G },
> +	{ PID_MODPHY3_N_MODPHY_PCR_CMN_ANA_DWORD30,	N_MODPHY_PCR_CMN_ANA_DWORD30_2P5G },
> +	{}
> +};
> +
> +static const struct pmc_serdes_regs pid_modphy1_1g_regs[] = {
> +	{ PID_MODPHY1_B_MODPHY_PCR_LCPLL_DWORD0,	B_MODPHY_PCR_LCPLL_DWORD0_1G },
> +	{ PID_MODPHY1_N_MODPHY_PCR_LCPLL_DWORD2,	N_MODPHY_PCR_LCPLL_DWORD2_1G },
> +	{ PID_MODPHY1_N_MODPHY_PCR_LCPLL_DWORD7,	N_MODPHY_PCR_LCPLL_DWORD7_1G },
> +	{ PID_MODPHY1_N_MODPHY_PCR_LPPLL_DWORD10,	N_MODPHY_PCR_LPPLL_DWORD10_1G },
> +	{ PID_MODPHY1_N_MODPHY_PCR_CMN_ANA_DWORD30,	N_MODPHY_PCR_CMN_ANA_DWORD30_1G },
> +	{}
> +};
> +
> +static const struct pmc_serdes_regs pid_modphy1_2p5g_regs[] = {
> +	{ PID_MODPHY1_B_MODPHY_PCR_LCPLL_DWORD0,	B_MODPHY_PCR_LCPLL_DWORD0_2P5G },
> +	{ PID_MODPHY1_N_MODPHY_PCR_LCPLL_DWORD2,	N_MODPHY_PCR_LCPLL_DWORD2_2P5G },
> +	{ PID_MODPHY1_N_MODPHY_PCR_LCPLL_DWORD7,	N_MODPHY_PCR_LCPLL_DWORD7_2P5G },
> +	{ PID_MODPHY1_N_MODPHY_PCR_LPPLL_DWORD10,	N_MODPHY_PCR_LPPLL_DWORD10_2P5G },
> +	{ PID_MODPHY1_N_MODPHY_PCR_CMN_ANA_DWORD30,	N_MODPHY_PCR_CMN_ANA_DWORD30_2P5G },
> +	{}
> +};
> +
> +static const int ehl_tsn_lane_registers[] = {7, 8, 9, 10, 11};
> +#else
> +static const int ehl_tsn_lane_registers[] = {};
> +#endif /* CONFIG_INTEL_PMC_IPC */
> +
>  #endif /* __DWMAC_INTEL_H__ */
> diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
> index 9201ed778ebc..75765cf52cd1 100644
> --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
> +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
> @@ -1103,11 +1103,31 @@ static void stmmac_mac_link_up(struct phylink_config *config,
>  		stmmac_hwtstamp_correct_latency(priv, priv);
>  }
>  

> +#if IS_ENABLED(CONFIG_INTEL_PMC_IPC)
> +static int stmmac_mac_prepare(struct phylink_config *config, unsigned int mode,
> +			      phy_interface_t interface)
> +{
> +	struct net_device *ndev = to_net_dev(config->dev);
> +	struct stmmac_priv *priv = netdev_priv(ndev);
> +	int ret = 0;
> +
> +	priv->plat->phy_interface = interface;
> +
> +	if (priv->plat->config_serdes)
> +		ret = priv->plat->config_serdes(ndev, priv->plat->bsp_priv);
> +
> +	return ret;
> +}
> +#endif
> +
>  static const struct phylink_mac_ops stmmac_phylink_mac_ops = {
>  	.mac_select_pcs = stmmac_mac_select_pcs,
>  	.mac_config = stmmac_mac_config,
>  	.mac_link_down = stmmac_mac_link_down,
>  	.mac_link_up = stmmac_mac_link_up,
> +#if IS_ENABLED(CONFIG_INTEL_PMC_IPC)
> +	.mac_prepare = stmmac_mac_prepare,
> +#endif

Please no for the platform-specific ifdef's in the generic code.
STMMAC driver is already overwhelmed with clumsy solutions. Let's not
add another one.

-Serge(y)

>  };
>  
>  /**
> diff --git a/include/linux/stmmac.h b/include/linux/stmmac.h
> index c0079a7574ae..aa7d4d96391c 100644
> --- a/include/linux/stmmac.h
> +++ b/include/linux/stmmac.h
> @@ -275,6 +275,7 @@ struct plat_stmmacenet_data {
>  	int (*serdes_powerup)(struct net_device *ndev, void *priv);
>  	void (*serdes_powerdown)(struct net_device *ndev, void *priv);
>  	void (*speed_mode_2500)(struct net_device *ndev, void *priv);
> +	int (*config_serdes)(struct net_device *ndev, void *priv);
>  	void (*ptp_clk_freq_config)(struct stmmac_priv *priv);
>  	int (*init)(struct platform_device *pdev, void *priv);
>  	void (*exit)(struct platform_device *pdev, void *priv);
> -- 
> 2.25.1
> 
> 

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ