[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <2fe54425-70b5-95e8-1e9e-337424827adb@arm.com>
Date: Tue, 26 Sep 2023 14:12:10 +0100
From: Suzuki K Poulose <suzuki.poulose@....com>
To: Tao Zhang <quic_taozha@...cinc.com>,
Mathieu Poirier <mathieu.poirier@...aro.org>,
Alexander Shishkin <alexander.shishkin@...ux.intel.com>,
Konrad Dybcio <konradybcio@...il.com>,
Mike Leach <mike.leach@...aro.org>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>
Cc: Jinlong Mao <quic_jinlmao@...cinc.com>,
Leo Yan <leo.yan@...aro.org>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
coresight@...ts.linaro.org, linux-arm-kernel@...ts.infradead.org,
linux-kernel@...r.kernel.org, devicetree@...r.kernel.org,
Tingwei Zhang <quic_tingweiz@...cinc.com>,
Yuanfang Zhang <quic_yuanfang@...cinc.com>,
Trilok Soni <quic_tsoni@...cinc.com>,
Hao Zhang <quic_hazha@...cinc.com>,
linux-arm-msm@...r.kernel.org, andersson@...nel.org
Subject: Re: [PATCH v9 00/13] Add support to configure TPDM DSB subunit
On 14/09/2023 06:43, Tao Zhang wrote:
> Introduction of TPDM DSB subunit
> DSB subunit is responsible for creating a dataset element, and is also
> optionally responsible for packing it to fit multiple elements on a
> single ATB transfer if possible in the configuration. The TPDM Core
> Datapath requests timestamps be stored by the TPDA and then delivering
> ATB sized data (depending on ATB width and element size, this could
> be smaller or larger than a dataset element) to the ATB Mast FSM.
>
> The DSB subunit must be configured prior to enablement. This series
> adds support for TPDM to configure the configure DSB subunit.
>
> Once this series patches are applied properly, the new tpdm nodes for
> should be observed at the tpdm path /sys/bus/coresight/devices/tpdm*
> which supports DSB subunit.
> e.g.
> root@...uarm64:/sys/devices/platform/soc@...c08000.tpdm/tpdm1# ls -l
> drwxr-xr-x 2 root root 0 Jan 1 00:00 connections
> drwxr-xr-x 2 root root 0 Jan 1 00:00 dsb_edge
> -rw-r--r-- 1 root root 4096 Jan 1 00:00 dsb_mode
> drwxr-xr-x 2 root root 0 Jan 1 00:00 dsb_msr
> drwxr-xr-x 2 root root 0 Jan 1 00:00 dsb_patt
> -rw-r--r-- 1 root root 4096 Jan 1 00:00 dsb_patt_ts
> -rw-r--r-- 1 root root 4096 Jan 1 00:00 dsb_patt_type
> drwxr-xr-x 2 root root 0 Jan 1 00:00 dsb_trig_patt
> -rw-r--r-- 1 root root 4096 Jan 1 00:00 dsb_trig_ts
> -rw-r--r-- 1 root root 4096 Jan 1 00:00 dsb_trig_type
> -rw-r--r-- 1 root root 4096 Jan 1 00:02 enable_source
> --w------- 1 root root 4096 Jan 1 00:00 integration_test
> drwxr-xr-x 2 root root 0 Jan 1 00:00 power
> --w------- 1 root root 4096 Jan 1 00:02 reset_dataset
> lrwxrwxrwx 1 root root 0 Apr 5 2021 subsystem -> ../../../../../bus/coresight
> -rw-r--r-- 1 root root 4096 Apr 5 2021 uevent
> -r--r--r-- 1 root root 4096 Jan 1 00:00 waiting_for_supplier
>
> We can use the commands are similar to the below to configure the
> TPDMs which support DSB subunit. Enable coresight sink first.
> echo 1 > /sys/bus/coresight/devices/tmc_etf0/enable_sink
> echo 1 > /sys/bus/coresight/devices/tpdm1/reset_dataset
> echo 0x3 > /sys/bus/coresight/devices/tpdm1/dsb_edge/ctrl_idx
> echo 0x1 > /sys/bus/coresight/devices/tpdm1/dsb_edge/ctrl_mask
> echo 0x0 > /sys/bus/coresight/devices/tpdm1/dsb_edge/ctrl_val
> echo 1 > /sys/bus/coresight/devices/tpdm1/dsb_patt/enable_ts
> echo 1 > /sys/bus/coresight/devices/tpdm1/dsb_patt/set_type
> echo 0 > /sys/bus/coresight/devices/tpdm1/dsb_trig_ts
> echo 0xFFFFFFFF > /sys/bus/coresight/devices/tpdm1/dsb_patt/tpmr5
> echo 0xFFFFFFFF > /sys/bus/coresight/devices/tpdm1/dsb_trig_patt/xpr2
> echo 1 > /sys/bus/coresight/devices/tpdm1/enable_source
>
I have reviewed this set, except for the last patch, rest looks fine.
If you could resend the series with the comments addressed, we could
queue this.
Suzuki
Powered by blists - more mailing lists