linux-kernel - [PATCH] i2c: core: dont change pinmux state to GPIO during recovery setup

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-ID: <20230926160255.330417-1-robert.marko@sartura.hr>
Date:   Tue, 26 Sep 2023 18:01:20 +0200
From:   Robert Marko <robert.marko@...tura.hr>
To:     wsa@...nel.org, codrin.ciubotariu@...rochip.com,
        linux-i2c@...r.kernel.org, linux-kernel@...r.kernel.org,
        linux@...linux.org.uk, linus.walleij@...aro.org,
        linux-gpio@...r.kernel.org
Cc:     Robert Marko <robert.marko@...tura.hr>
Subject: [PATCH] i2c: core: dont change pinmux state to GPIO during recovery setup

Ever since PXA I2C driver was moved to the generic I2C recovery, I2C has
stopped working completely on Armada 3720 if the pins are specified in DTS.

After a while it was traced down to the only difference being that PXA
driver did not change the pinmux state to GPIO before trying to acquire the
GPIO pins.
And indeed as soon as this call is removed I2C starts working.

To me it seems that this call is not required at all as devm_gpiod_get()
will result in the pinmux state being changed to GPIO via the pinmux
set_mux() op.

Fixes: 0b01392c18b9 ("i2c: pxa: move to generic GPIO recovery")
Signed-off-by: Robert Marko <robert.marko@...tura.hr>
---
 drivers/i2c/i2c-core-base.c | 7 -------
 1 file changed, 7 deletions(-)

diff --git a/drivers/i2c/i2c-core-base.c b/drivers/i2c/i2c-core-base.c
index 60746652fd52..b34d939078a1 100644
--- a/drivers/i2c/i2c-core-base.c
+++ b/drivers/i2c/i2c-core-base.c
@@ -359,13 +359,6 @@ static int i2c_gpio_init_generic_recovery(struct i2c_adapter *adap)
 	if (bri->recover_bus && bri->recover_bus != i2c_generic_scl_recovery)
 		return 0;
 
-	/*
-	 * pins might be taken as GPIO, so we should inform pinctrl about
-	 * this and move the state to GPIO
-	 */
-	if (bri->pinctrl)
-		pinctrl_select_state(bri->pinctrl, bri->pins_gpio);
-
 	/*
 	 * if there is incomplete or no recovery information, see if generic
 	 * GPIO recovery is available
-- 
2.41.0