[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <ZRMDqVCtrUyhcqaw@smile.fi.intel.com>
Date: Tue, 26 Sep 2023 19:15:37 +0300
From: Andy Shevchenko <andy@...nel.org>
To: Duje Mihanović <duje.mihanovic@...le.hr>
Cc: Daniel Mack <daniel@...que.org>,
Haojian Zhuang <haojian.zhuang@...il.com>,
Robert Jarzmik <robert.jarzmik@...e.fr>,
Russell King <linux@...linux.org.uk>,
Alan Stern <stern@...land.harvard.edu>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
Linus Walleij <linus.walleij@...aro.org>,
Bartosz Golaszewski <brgl@...ev.pl>,
linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
linux-usb@...r.kernel.org, linux-gpio@...r.kernel.org
Subject: Re: [PATCH RFC v2 3/6] ARM: pxa: Convert Spitz CF power control to
GPIO descriptors
On Tue, Sep 26, 2023 at 05:46:24PM +0200, Duje Mihanović wrote:
> Sharp's Spitz board still uses the legacy GPIO interface for controlling
> the power supply to its CF and SD card slots.
>
> Convert it to use the GPIO descriptor interface.
...
> + cf_power = gpiod_get(&pxa_device_mci.dev, "cf_power", GPIOD_ASIS);
> + if (IS_ERR(cf_power)) {
> + dev_err(&pxa_device_mci.dev,
> + "failed to get power control GPIO with %ld\n",
> + PTR_ERR(cf_power));
> + return;
> + }
> + gpiod_put(cf_power);
Don't you want to use guarded gpiod_get()?
Okay, it seems not yet in the pending list, but we can survive without that.
--
With Best Regards,
Andy Shevchenko
Powered by blists - more mailing lists