| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20230927154339.1600738-8-rrichter@amd.com>
Date: Wed, 27 Sep 2023 17:43:26 +0200
From: Robert Richter <rrichter@....com>
To: Alison Schofield <alison.schofield@...el.com>,
Vishal Verma <vishal.l.verma@...el.com>,
Ira Weiny <ira.weiny@...el.com>,
Ben Widawsky <bwidawsk@...nel.org>,
Dan Williams <dan.j.williams@...el.com>,
"Davidlohr Bueso" <dave@...olabs.net>,
Jonathan Cameron <jonathan.cameron@...wei.com>,
Dave Jiang <dave.jiang@...el.com>
CC: <linux-cxl@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
Bjorn Helgaas <bhelgaas@...gle.com>,
Terry Bowman <terry.bowman@....com>,
Robert Richter <rrichter@....com>
Subject: [PATCH v11 07/20] cxl/hdm: Use stored Component Register mappings to map HDM decoder capability
Now, that the Component Register mappings are stored, use them to
enable and map the HDM decoder capabilities. The Component Registers
do not need to be probed again for this, remove probing code.
The HDM capability applies to Endpoints, USPs and VH Host Bridges. The
Endpoint's component register mappings are located in the cxlds and
else in the port's structure. Duplicate the cxlds->reg_map in
port->reg_map for endpoint ports.
Signed-off-by: Terry Bowman <terry.bowman@....com>
Signed-off-by: Robert Richter <rrichter@....com>
Reviewed-by: Dave Jiang <dave.jiang@...el.com>
[rework to drop cxl_port_get_comp_map()]
Signed-off-by: Dan Williams <dan.j.williams@...el.com>
---
drivers/cxl/core/hdm.c | 48 ++++++++++++++++-------------------------
drivers/cxl/core/port.c | 29 +++++++++++++++++++------
drivers/cxl/mem.c | 5 ++---
3 files changed, 43 insertions(+), 39 deletions(-)
diff --git a/drivers/cxl/core/hdm.c b/drivers/cxl/core/hdm.c
index 11d9971f3e8c..14a0d0017df3 100644
--- a/drivers/cxl/core/hdm.c
+++ b/drivers/cxl/core/hdm.c
@@ -81,26 +81,6 @@ static void parse_hdm_decoder_caps(struct cxl_hdm *cxlhdm)
cxlhdm->interleave_mask |= GENMASK(14, 12);
}
-static int map_hdm_decoder_regs(struct cxl_port *port, void __iomem *crb,
- struct cxl_component_regs *regs)
-{
- struct cxl_register_map map = {
- .host = &port->dev,
- .resource = port->component_reg_phys,
- .base = crb,
- .max_size = CXL_COMPONENT_REG_BLOCK_SIZE,
- };
-
- cxl_probe_component_regs(&port->dev, crb, &map.component_map);
- if (!map.component_map.hdm_decoder.valid) {
- dev_dbg(&port->dev, "HDM decoder registers not implemented\n");
- /* unique error code to indicate no HDM decoder capability */
- return -ENODEV;
- }
-
- return cxl_map_component_regs(&map, regs, BIT(CXL_CM_CAP_CAP_ID_HDM));
-}
-
static bool should_emulate_decoders(struct cxl_endpoint_dvsec_info *info)
{
struct cxl_hdm *cxlhdm;
@@ -155,7 +135,7 @@ struct cxl_hdm *devm_cxl_setup_hdm(struct cxl_port *port,
{
struct device *dev = &port->dev;
struct cxl_hdm *cxlhdm;
- void __iomem *crb;
+ struct cxl_register_map *reg_map;
int rc;
cxlhdm = devm_kzalloc(dev, sizeof(*cxlhdm), GFP_KERNEL);
@@ -164,19 +144,29 @@ struct cxl_hdm *devm_cxl_setup_hdm(struct cxl_port *port,
cxlhdm->port = port;
dev_set_drvdata(dev, cxlhdm);
- crb = ioremap(port->component_reg_phys, CXL_COMPONENT_REG_BLOCK_SIZE);
- if (!crb && info && info->mem_enabled) {
- cxlhdm->decoder_count = info->ranges;
- return cxlhdm;
- } else if (!crb) {
+ reg_map = &port->reg_map;
+ if (reg_map->resource == CXL_RESOURCE_NONE) {
+ if (info && info->mem_enabled) {
+ cxlhdm->decoder_count = info->ranges;
+ return cxlhdm;
+ }
+ WARN_ON(1);
dev_err(dev, "No component registers mapped\n");
return ERR_PTR(-ENXIO);
}
- rc = map_hdm_decoder_regs(port, crb, &cxlhdm->regs);
- iounmap(crb);
- if (rc)
+ if (!reg_map->component_map.hdm_decoder.valid) {
+ dev_dbg(&port->dev, "HDM decoder registers not implemented\n");
+ /* unique error code to indicate no HDM decoder capability */
+ return ERR_PTR(-ENODEV);
+ }
+
+ rc = cxl_map_component_regs(reg_map, &cxlhdm->regs,
+ BIT(CXL_CM_CAP_CAP_ID_HDM));
+ if (rc) {
+ dev_dbg(dev, "Failed to map HDM capability.\n");
return ERR_PTR(rc);
+ }
parse_hdm_decoder_caps(cxlhdm);
if (cxlhdm->decoder_count == 0) {
diff --git a/drivers/cxl/core/port.c b/drivers/cxl/core/port.c
index 28ba8922d0a4..f69484d3c93c 100644
--- a/drivers/cxl/core/port.c
+++ b/drivers/cxl/core/port.c
@@ -751,16 +751,31 @@ static struct cxl_port *__devm_cxl_add_port(struct device *host,
return port;
dev = &port->dev;
- if (is_cxl_memdev(uport_dev))
+ if (is_cxl_memdev(uport_dev)) {
+ struct cxl_memdev *cxlmd = to_cxl_memdev(uport_dev);
+ struct cxl_dev_state *cxlds = cxlmd->cxlds;
+
rc = dev_set_name(dev, "endpoint%d", port->id);
- else if (parent_dport)
+ if (rc)
+ goto err;
+
+ /*
+ * The endpoint driver already enumerated the component and RAS
+ * registers. Reuse that enumeration while prepping them to be
+ * mapped by the cxl_port driver.
+ */
+ port->reg_map = cxlds->reg_map;
+ port->reg_map.host = &port->dev;
+ } else if (parent_dport) {
rc = dev_set_name(dev, "port%d", port->id);
- else
- rc = dev_set_name(dev, "root%d", port->id);
- if (rc)
- goto err;
+ if (rc)
+ goto err;
- rc = cxl_port_setup_regs(port, component_reg_phys);
+ rc = cxl_port_setup_regs(port, component_reg_phys);
+ if (rc)
+ goto err;
+ } else
+ rc = dev_set_name(dev, "root%d", port->id);
if (rc)
goto err;
diff --git a/drivers/cxl/mem.c b/drivers/cxl/mem.c
index 317c7548e4e9..04107058739b 100644
--- a/drivers/cxl/mem.c
+++ b/drivers/cxl/mem.c
@@ -49,7 +49,6 @@ static int devm_cxl_add_endpoint(struct device *host, struct cxl_memdev *cxlmd,
struct cxl_dport *parent_dport)
{
struct cxl_port *parent_port = parent_dport->port;
- struct cxl_dev_state *cxlds = cxlmd->cxlds;
struct cxl_port *endpoint, *iter, *down;
int rc;
@@ -65,8 +64,8 @@ static int devm_cxl_add_endpoint(struct device *host, struct cxl_memdev *cxlmd,
ep->next = down;
}
- endpoint = devm_cxl_add_port(host, &cxlmd->dev,
- cxlds->component_reg_phys,
+ /* Note: endpoint port component registers are derived from @cxlds */
+ endpoint = devm_cxl_add_port(host, &cxlmd->dev, CXL_RESOURCE_NONE,
parent_dport);
if (IS_ERR(endpoint))
return PTR_ERR(endpoint);
--
2.30.2
Powered by blists - more mailing lists