Message-Id: <20230927075713.1253681-1-trent.lloyd@canonical.com>
Date:   Wed, 27 Sep 2023 07:57:12 +0000
From:   Trent Lloyd <trent.lloyd@...onical.com>
To:     Roopa Prabhu <roopa@...dia.com>,
        Nikolay Aleksandrov <razor@...ckwall.org>,
        "David S. Miller" <davem@...emloft.net>,
        Eric Dumazet <edumazet@...gle.com>,
        Jakub Kicinski <kuba@...nel.org>,
        Paolo Abeni <pabeni@...hat.com>, Shuah Khan <shuah@...nel.org>
Cc:     Trent Lloyd <trent.lloyd@...onical.com>,
        linux-kernel@...r.kernel.org, bridge@...ts.linux-foundation.org,
        netdev@...r.kernel.org, linux-kselftest@...r.kernel.org
Subject: [PATCH] bridge: MTU auto tuning ignores IFLA_MTU on NEWLINK

Commit 804b854d374e ("net: bridge: disable bridge MTU auto tuning if it
was set manually") disabled auto-tuning of the bridge MTU when the MTU
was explicitly set by the user, however that would only happen when the
MTU was set after creation. This commit ensures auto-tuning is also
disabled when the MTU is set during bridge creation.

Currently when the br_netdev_ops br_change_mtu function is called, the
flag BROPT_MTU_SET_BY_USER is set. However this function is only called
when the MTU is changed after interface creation and is not called if
the MTU is specified during creation with IFLA_MTU (br_dev_newlink).

br_change_mtu also does not get called if the MTU is set to the same
value it currently has, which makes it difficult to work around this
issue (especially for the default MTU of 1500) as you have to first
change the MTU to some other value and then back to the desired value.

Add new selftests to ensure the bridge MTU is handled correctly:
 - Bridge created with user-specified MTU (1500)
 - Bridge created with user-specified MTU (2000)
 - Bridge created without user-specified MTU
 - Bridge created with user-specified MTU set after creation (2000)

Regression risk: Any workload which erroneously specified an MTU during
creation but accidentally relied upon auto-tuning to a different value
may be broken by this change.

Link: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/2034099
Fixes: 804b854d374e ("net: bridge: disable bridge MTU auto tuning if it was set manually")
Signed-off-by: Trent Lloyd <trent.lloyd@...onical.com>
---
 net/bridge/br_netlink.c                       |   3 +
 .../selftests/drivers/net/bridge/Makefile     |  10 ++
 .../drivers/net/bridge/bridge-user-mtu.sh     | 148 ++++++++++++++++++
 .../drivers/net/bridge/net_forwarding_lib.sh  |   1 +
 4 files changed, 162 insertions(+)
 create mode 100644 tools/testing/selftests/drivers/net/bridge/Makefile
 create mode 100755 tools/testing/selftests/drivers/net/bridge/bridge-user-mtu.sh
 create mode 120000 tools/testing/selftests/drivers/net/bridge/net_forwarding_lib.sh

diff --git a/net/bridge/br_netlink.c b/net/bridge/br_netlink.c
index 10f0d33d8ccf..8aff7d077848 100644
--- a/net/bridge/br_netlink.c
+++ b/net/bridge/br_netlink.c
@@ -1559,6 +1559,9 @@ static int br_dev_newlink(struct net *src_net, struct net_device *dev,
 		spin_unlock_bh(&br->lock);
 	}
 
+	if (tb[IFLA_MTU])
+		br_opt_toggle(br, BROPT_MTU_SET_BY_USER, true);
+
 	err = br_changelink(dev, tb, data, extack);
 	if (err)
 		br_dev_delete(dev, NULL);
diff --git a/tools/testing/selftests/drivers/net/bridge/Makefile b/tools/testing/selftests/drivers/net/bridge/Makefile
new file mode 100644
index 000000000000..23e407c75a7f
--- /dev/null
+++ b/tools/testing/selftests/drivers/net/bridge/Makefile
@@ -0,0 +1,10 @@
+# SPDX-License-Identifier: GPL-2.0
+# Makefile for net selftests
+
+TEST_PROGS := \
+	bridge-user-mtu.sh
+
+TEST_FILES := \
+	net_forwarding_lib.sh
+
+include ../../../lib.mk
diff --git a/tools/testing/selftests/drivers/net/bridge/bridge-user-mtu.sh b/tools/testing/selftests/drivers/net/bridge/bridge-user-mtu.sh
new file mode 100755
index 000000000000..07e0ac972b00
--- /dev/null
+++ b/tools/testing/selftests/drivers/net/bridge/bridge-user-mtu.sh
@@ -0,0 +1,148 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+#
+# Ensure a bridge MTU does not automatically change when it has been specified
+# by the user.
+#
+# To run independently:
+# make TARGETS=drivers/net/bridge kselftest
+
+ALL_TESTS="
+	bridge_created_with_user_specified_mtu
+	bridge_created_without_user_specified_mtu
+	bridge_with_late_user_specified_mtu
+"
+
+REQUIRE_MZ=no
+NUM_NETIFS=0
+lib_dir=$(dirname "$0")
+source "${lib_dir}"/net_forwarding_lib.sh
+
+setup_prepare()
+{
+	for i in 1 3 5; do
+		ip link add "vtest${i}" mtu 9000 type veth peer name "vtest${i}b" mtu 9000
+	done
+}
+
+cleanup()
+{
+	for interface in vtest1 vtest3 vtest5 br-test0 br-test1 br-test2; do
+		if [[ -d "/sys/class/net/${interface}" ]]; then
+			ip link del "${interface}" &> /dev/null
+		fi
+	done
+}
+
+check_mtu()
+{
+	cur_mtu=$(<"/sys/class/net/$1/mtu")
+	[[ ${cur_mtu} -eq $2 ]]
+	exit_status=$?
+	return "${exit_status}"
+}
+
+check_bridge_user_specified_mtu()
+{
+	if [[ -z $1 ]]
+	then
+		exit 1
+	fi
+	mtu=$1
+
+	RET=0
+
+	ip link add dev br-test0 mtu "${mtu}" type bridge
+	ip link set br-test0 up
+	check_mtu br-test0 "${mtu}"
+	check_err $? "Bridge was not created with the user-specified MTU"
+
+	check_mtu vtest1 9000
+	check_err $? "vtest1 does not have MTU 9000"
+
+	ip link set dev vtest1 master br-test0
+	check_mtu br-test0 "${mtu}"
+	check_err $? "Bridge user-specified MTU incorrectly changed after adding an interface"
+
+	log_test "Bridge created with user-specified MTU (${mtu})"
+
+	ip link del br-test0
+}
+
+bridge_created_with_user_specified_mtu() {
+	# Check two user-specified MTU values
+	# - 1500: To ensure the default MTU (1500) is not special-cased, you
+	#         should be able to lock a bridge to the default MTU.
+	# - 2000: Ensure bridges are actually created with a user-specified MTU
+	check_bridge_user_specified_mtu 1500
+	check_bridge_user_specified_mtu 2000
+}
+
+bridge_created_without_user_specified_mtu()
+{
+	RET=0
+	ip link add dev br-test1 type bridge
+	ip link set br-test1 up
+	check_mtu br-test1 1500
+	check_err $? "Bridge was not created with the user-specified MTU"
+
+	ip link set dev vtest3 master br-test1
+	check_mtu br-test1 9000
+	check_err $? "Bridge without user-specified MTU did not change MTU"
+
+	log_test "Bridge created without user-specified MTU"
+
+	ip link del br-test1
+}
+
+check_bridge_late_user_specified_mtu()
+{
+	if [[ -z $1 ]]
+	then
+		exit 1
+	fi
+	mtu=$1
+
+	RET=0
+	ip link add dev br-test2 type bridge
+	ip link set br-test2 up
+	check_mtu br-test2 1500
+	check_err $? "Bridge was not created with default MTU (1500)"
+
+	ip link set br-test2 mtu "${mtu}"
+	check_mtu br-test2 "${mtu}"
+	check_err $? "User-specified MTU set after creation was not set"
+	check_mtu vtest5 9000
+	check_err $? "vtest5 does not have MTU 9000"
+
+	ip link set dev vtest5 master br-test2
+	check_mtu br-test2 "${mtu}"
+	check_err $? "Bridge late-specified MTU incorrectly changed after adding an interface"
+
+	log_test "Bridge created without user-specified MTU and changed after (${mtu})"
+
+	ip link del br-test2
+}
+
+bridge_with_late_user_specified_mtu()
+{
+	# Note: Unfortunately auto-tuning is not disabled when you set the MTU
+	# to it's current value, including the default of 1500. The reason is
+	# that dev_set_mtu_ext skips notifying any handlers if the MTU is set
+	# to the current value. Normally that makes sense, but is confusing
+	# since you might expect "ip link set br0 mtu 1500" to lock the MTU to
+	# 1500 but that will only happen if the MTU was not already 1500. So we
+	# only check a non-default value of 2000 here unlike the earlier
+	# bridge_created_with_user_specified_mtu test
+
+	# Check one user-specified MTU value
+	# - 2000: Ensure bridges actually change to a user-specified MTU
+	check_bridge_late_user_specified_mtu 2000
+}
+
+trap cleanup EXIT
+
+setup_prepare
+tests_run
+
+exit "${EXIT_STATUS}"
diff --git a/tools/testing/selftests/drivers/net/bridge/net_forwarding_lib.sh b/tools/testing/selftests/drivers/net/bridge/net_forwarding_lib.sh
new file mode 120000
index 000000000000..39c96828c5ef
--- /dev/null
+++ b/tools/testing/selftests/drivers/net/bridge/net_forwarding_lib.sh
@@ -0,0 +1 @@
+../../../net/forwarding/lib.sh
\ No newline at end of file
-- 
2.34.1

Powered by blists - more mailing lists