[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <ZRWfhk0aEDwytGv5@dell-precision-5540>
Date: Thu, 28 Sep 2023 11:45:10 -0400
From: Ben Wolsieffer <ben.wolsieffer@...ring.com>
To: Christophe Roullier <christophe.roullier@...s.st.com>
Cc: "David S . Miller" <davem@...emloft.net>,
Eric Dumazet <edumazet@...gle.com>,
Jakub Kicinski <kuba@...nel.org>,
Paolo Abeni <pabeni@...hat.com>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Conor Dooley <conor+dt@...nel.org>,
Maxime Coquelin <mcoquelin.stm32@...il.com>,
Alexandre Torgue <alexandre.torgue@...s.st.com>,
Richard Cochran <richardcochran@...il.com>,
Jose Abreu <joabreu@...opsys.com>,
Liam Girdwood <lgirdwood@...il.com>,
Mark Brown <broonie@...nel.org>, netdev@...r.kernel.org,
devicetree@...r.kernel.org,
linux-stm32@...md-mailman.stormreply.com,
linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH v3 08/12] net: ethernet: stmmac: stm32: support the
phy-supply regulator binding
Hello,
On Thu, Sep 28, 2023 at 05:15:08PM +0200, Christophe Roullier wrote:
> From: Christophe Roullier <christophe.roullier@...com>
>
> Configure the phy regulator if defined by the "phy-supply" DT phandle.
>
> Signed-off-by: Christophe Roullier <christophe.roullier@...s.st.com>
> ---
> .../net/ethernet/stmicro/stmmac/dwmac-stm32.c | 51 ++++++++++++++++++-
> 1 file changed, 50 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-stm32.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-stm32.c
> index 72dda71850d75..31e3abd2caeaa 100644
> --- a/drivers/net/ethernet/stmicro/stmmac/dwmac-stm32.c
> +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-stm32.c
... snip ...
> static int stm32mp1_suspend(struct stm32_dwmac *dwmac)
> @@ -455,12 +496,20 @@ static int stm32mp1_suspend(struct stm32_dwmac *dwmac)
> if (dwmac->enable_eth_ck)
> clk_disable_unprepare(dwmac->clk_eth_ck);
>
> + /* Keep the PHY up if we use Wake-on-Lan. */
> + if (!device_may_wakeup(dwmac->dev))
> + phy_power_on(dwmac, false);
> +
> return ret;
> }
>
> static void stm32mp1_resume(struct stm32_dwmac *dwmac)
> {
> clk_disable_unprepare(dwmac->clk_ethstp);
> +
> + /* The PHY was up for Wake-on-Lan. */
> + if (!device_may_wakeup(dwmac->dev))
> + phy_power_on(dwmac, true);
> }
>
> static int stm32mcu_suspend(struct stm32_dwmac *dwmac)
Why only turn off the regulator in suspend on the STM32MP1 and not STM32
MCUs? It seems like this could just go in stm32_dwmac_suspend/resume().
Selfishly, I have a use case for this on an STM32F746 platform, so I
would like to see support for it and would test an updated version.
> --
> 2.25.1
>
Thanks, Ben
Powered by blists - more mailing lists