| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20230928154720.GA462358@bhelgaas>
Date: Thu, 28 Sep 2023 10:47:20 -0500
From: Bjorn Helgaas <helgaas@...nel.org>
To: D Scott Phillips <scott@...amperecomputing.com>
Cc: linux-acpi@...r.kernel.org, linux-pci@...r.kernel.org,
"Rafael J. Wysocki" <rafael@...nel.org>,
Bjorn Helgaas <bhelgaas@...gle.com>,
Len Brown <lenb@...nel.org>, linux-kernel@...r.kernel.org,
Darren Hart <darren@...amperecomputing.com>,
patches@...erecomputing.com
Subject: Re: [PATCH] PCI: hotplug: Add extension driver for Ampere Altra
hotplug LED control
On Wed, Sep 27, 2023 at 01:23:47PM -0700, D Scott Phillips wrote:
> On Ampere Altra, PCIe hotplug is handled through ACPI. A side interface is
> also present to request system firmware control of attention LEDs. Add an
> ACPI PCI Hotplug companion driver to support attention LED control.
>
> Signed-off-by: D Scott Phillips <scott@...amperecomputing.com>
> ---
> drivers/pci/hotplug/Kconfig | 13 ++
> drivers/pci/hotplug/Makefile | 3 +-
> drivers/pci/hotplug/acpiphp_ampere_altra.c | 141 +++++++++++++++++++++
> 3 files changed, 156 insertions(+), 1 deletion(-)
> create mode 100644 drivers/pci/hotplug/acpiphp_ampere_altra.c
>
> diff --git a/drivers/pci/hotplug/Kconfig b/drivers/pci/hotplug/Kconfig
> index 48113b210cf93..9fde600a9ad3e 100644
> --- a/drivers/pci/hotplug/Kconfig
> +++ b/drivers/pci/hotplug/Kconfig
> @@ -61,6 +61,19 @@ config HOTPLUG_PCI_ACPI
>
> When in doubt, say N.
>
> +config HOTPLUG_PCI_ACPI_AMPERE_ALTRA
> + tristate "ACPI PCI Hotplug driver Ampere Altra extensions"
> + depends on HOTPLUG_PCI_ACPI
> + depends on HAVE_ARM_SMCCC_DISCOVERY
> + depends on m
Why is this restricted to being a module? It's not unprecedented, but
unless this only works as a module for some reason, I would leave that
choice up to the user.
> + help
> + Say Y here if you have an Ampere Altra system.
> +
> + To compile this driver as a module, choose M here: the
> + module will be called acpiphp_ampere_altra.
> +
> + When in doubt, say N.
> +
> config HOTPLUG_PCI_ACPI_IBM
> tristate "ACPI PCI Hotplug driver IBM extensions"
> depends on HOTPLUG_PCI_ACPI
> diff --git a/drivers/pci/hotplug/Makefile b/drivers/pci/hotplug/Makefile
> index 5196983220df6..29d7f6171b305 100644
> --- a/drivers/pci/hotplug/Makefile
> +++ b/drivers/pci/hotplug/Makefile
> @@ -21,8 +21,9 @@ obj-$(CONFIG_HOTPLUG_PCI_RPA_DLPAR) += rpadlpar_io.o
> obj-$(CONFIG_HOTPLUG_PCI_ACPI) += acpiphp.o
> obj-$(CONFIG_HOTPLUG_PCI_S390) += s390_pci_hpc.o
>
> -# acpiphp_ibm extends acpiphp, so should be linked afterwards.
> +# acpiphp_ibm extend acpiphp, so should be linked afterwards.
>
> +obj-$(CONFIG_HOTPLUG_PCI_ACPI_AMPERE_ALTRA) += acpiphp_ampere_altra.o
> obj-$(CONFIG_HOTPLUG_PCI_ACPI_IBM) += acpiphp_ibm.o
>
> pci_hotplug-objs := pci_hotplug_core.o
> diff --git a/drivers/pci/hotplug/acpiphp_ampere_altra.c b/drivers/pci/hotplug/acpiphp_ampere_altra.c
> new file mode 100644
> index 0000000000000..8692b939dea78
> --- /dev/null
> +++ b/drivers/pci/hotplug/acpiphp_ampere_altra.c
> @@ -0,0 +1,141 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * ACPI PCI Hot Plug Ampere Altra Extension
Would be helpful to include a hint about what this module *does*.
IIUC, it controls the attention indicator.
> + *
> + * Copyright (C) 2023 Ampere Computing LLC
> + *
Spurious blank line.
> + */
> +
> +#define pr_fmt(fmt) "acpiphp_ampere_altra: " fmt
> +
> +#include <linux/init.h>
> +#include <linux/module.h>
> +#include <linux/pci.h>
> +#include <linux/pci_hotplug.h>
> +
> +#include "acpiphp.h"
> +
> +#define HANDLE_OPEN 0xb0200000
> +#define HANDLE_CLOSE 0xb0300000
> +#define REQUEST 0xf0700000
> +#define LED_CMD 0x00000004
> +#define LED_ATTENTION 0x00000002
> +#define LED_SET_ON 0x00000001
> +#define LED_SET_OFF 0x00000002
> +#define LED_SET_BLINK 0x00000003
> +
> +static const struct acpi_device_id acpi_ids[] = {
> + {"AMPC0008", 0}, {}
> +};
> +MODULE_DEVICE_TABLE(acpi, acpi_ids);
> +
> +static u32 led_service_id[4];
> +
> +static int led_status(u8 status)
> +{
> + switch (status) {
> + case 1: return LED_SET_ON;
> + case 2: return LED_SET_BLINK;
> + default: return LED_SET_OFF;
> + }
> +}
> +
> +static int set_attention_status(struct hotplug_slot *slot, u8 status)
> +{
> + struct arm_smccc_res res;
> + struct pci_bus *bus;
> + struct pci_dev *root_port;
> + unsigned long flags;
> + u32 handle;
> + int ret = 0;
> +
> + bus = slot->pci_slot->bus;
> + root_port = pcie_find_root_port(bus->self);
> + if (!root_port)
> + return -ENODEV;
> +
> + local_irq_save(flags);
> + arm_smccc_smc(HANDLE_OPEN, led_service_id[0], led_service_id[1],
> + led_service_id[2], led_service_id[3], 0, 0, 0, &res);
> + if (res.a0) {
> + ret = -ENODEV;
> + goto out;
> + }
> + handle = res.a1 & 0xffff0000;
> +
> + arm_smccc_smc(REQUEST, LED_CMD, led_status(status), LED_ATTENTION,
> + pci_domain_nr(bus) | ((root_port->devfn >> 3) << 4), 0, 0,
PCI_SLOT(root_port->devfn)
> + handle, &res);
> + if (res.a0)
> + ret = -ENODEV;
> +
> + arm_smccc_smc(HANDLE_CLOSE, handle, 0, 0, 0, 0, 0, 0, &res);
> +
> + out:
> + local_irq_restore(flags);
> + return ret;
> +}
> +
> +static int get_attention_status(struct hotplug_slot *slot, u8 *status)
> +{
> + return -EINVAL;
> +}
> +
> +static struct acpiphp_attention_info ampere_altra_attn = {
> + .set_attn = set_attention_status,
> + .get_attn = get_attention_status,
> + .owner = THIS_MODULE,
> +};
> +
> +static acpi_status __init get_acpi_handle(acpi_handle handle, u32 level,
> + void *context, void **return_value)
> +{
> + *(acpi_handle *)return_value = handle;
> + return AE_CTRL_TERMINATE;
> +}
> +
> +static int __init acpiphp_ampere_altra_init(void)
> +{
> + struct fwnode_handle *fwnode;
> + acpi_handle leds_handle = NULL;
> + struct acpi_device *leds;
> + acpi_status status;
> + int ret;
> +
> + status = acpi_get_devices("AMPC0008", get_acpi_handle, NULL,
> + &leds_handle);
Rafael, can you comment on whether we should use acpi_get_devices(),
acpi_bus_register_driver(), acpi_acpi_scan_add_handler(), or something
else here? I try to avoid pci_get_device() because it subverts the
driver model (no hotplug support, no driver/device binding).
I see Documentation/driver-api/acpi/scan_handlers.rst, but I'm not
clear on when to use acpi_bus_register_driver() vs
acpi_acpi_scan_add_handler().
I guess the only ACPI connection here is to retrieve the "uuid"
property once, and there's no need for any ACPI services after that.
> + if (ACPI_FAILURE(status) || !leds_handle)
> + return -ENODEV;
> + leds = acpi_get_acpi_dev(leds_handle);
> + if (!leds) {
> + pr_err("can't find device\n");
> + return -ENODEV;
> + }
> +
> + fwnode = acpi_fwnode_handle(leds);
> + ret = fwnode_property_read_u32_array(fwnode, "uuid", led_service_id, 4);
> + acpi_put_acpi_dev(leds);
> + if (ret) {
> + pr_err("can't find uuid\n");
> + return -ENODEV;
> + }
> +
> + if (acpiphp_register_attention(&ere_altra_attn)) {
> + pr_err("can't register driver\n");
> + return -ENODEV;
> + }
> +
> + return 0;
> +}
> +
> +module_init(acpiphp_ampere_altra_init);
> +
> +static void __exit acpiphp_ampere_altra_exit(void)
> +{
> + acpiphp_unregister_attention(&ere_altra_attn);
> +}
> +
> +module_exit(acpiphp_ampere_altra_exit);
> +
> +MODULE_AUTHOR("D Scott Phillips <scott@...amperecomputing.com>");
> +MODULE_LICENSE("GPL");
> --
> 2.41.0
>
Powered by blists - more mailing lists