[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20230928-footwork-padlock-524173c3e205@spud>
Date: Thu, 28 Sep 2023 21:39:04 +0100
From: Conor Dooley <conor@...nel.org>
To: Christophe Roullier <christophe.roullier@...s.st.com>
Cc: "David S . Miller" <davem@...emloft.net>,
Eric Dumazet <edumazet@...gle.com>,
Jakub Kicinski <kuba@...nel.org>,
Paolo Abeni <pabeni@...hat.com>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Conor Dooley <conor+dt@...nel.org>,
Maxime Coquelin <mcoquelin.stm32@...il.com>,
Alexandre Torgue <alexandre.torgue@...s.st.com>,
Richard Cochran <richardcochran@...il.com>,
Jose Abreu <joabreu@...opsys.com>,
Liam Girdwood <lgirdwood@...il.com>,
Mark Brown <broonie@...nel.org>, netdev@...r.kernel.org,
devicetree@...r.kernel.org,
linux-stm32@...md-mailman.stormreply.com,
linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH v3 01/12] dt-bindings: net: add STM32MP13 compatible in
documentation for stm32
Hey,
On Thu, Sep 28, 2023 at 05:15:01PM +0200, Christophe Roullier wrote:
> New STM32 SOC have 2 GMACs instances.
> GMAC IP version is SNPS 4.20.
>
> Signed-off-by: Christophe Roullier <christophe.roullier@...s.st.com>
> ---
> .../devicetree/bindings/net/stm32-dwmac.yaml | 78 +++++++++++++++++--
> 1 file changed, 70 insertions(+), 8 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/net/stm32-dwmac.yaml b/Documentation/devicetree/bindings/net/stm32-dwmac.yaml
> index fc8c96b08d7dc..ca976281bfc22 100644
> --- a/Documentation/devicetree/bindings/net/stm32-dwmac.yaml
> +++ b/Documentation/devicetree/bindings/net/stm32-dwmac.yaml
> @@ -22,18 +22,17 @@ select:
> enum:
> - st,stm32-dwmac
> - st,stm32mp1-dwmac
> + - st,stm32mp13-dwmac
> required:
> - compatible
>
> -allOf:
> - - $ref: snps,dwmac.yaml#
> -
> properties:
> compatible:
> oneOf:
> - items:
> - enum:
> - st,stm32mp1-dwmac
> + - st,stm32mp13-dwmac
> - const: snps,dwmac-4.20a
> - items:
> - enum:
> @@ -74,13 +73,10 @@ properties:
>
> st,syscon:
> $ref: /schemas/types.yaml#/definitions/phandle-array
> - items:
> - - items:
> - - description: phandle to the syscon node which encompases the glue register
> - - description: offset of the control register
> description:
> Should be phandle/offset pair. The phandle to the syscon node which
> - encompases the glue register, and the offset of the control register
> + encompases the glue register, the offset of the control register and
> + the mask to set bitfield in control register
>
> st,eth-clk-sel:
> description:
> @@ -101,6 +97,38 @@ required:
>
> unevaluatedProperties: false
>
> +allOf:
> + - $ref: snps,dwmac.yaml#
> + - if:
> + properties:
> + compatible:
> + contains:
> + enum:
> + - st,stm32mp1-dwmac
> + - st,stm32-dwmac
> + then:
> + properties:
> + st,syscon:
> + items:
> + items:
> + - description: phandle to the syscon node which encompases the glue register
> + - description: offset of the control register
These descriptions should, IMO, be moved back out to the st,syscon
definition. If you put the 3 descriptions there, with "minItems: 2" &
put "maxItems: 2" and "minItems: 3" in each of the if/then clauses.
Also, it should be sufficient to simplify to if/then/else.
Cheers,
Conor.
> +
> + - if:
> + properties:
> + compatible:
> + contains:
> + enum:
> + - st,stm32mp13-dwmac
> + then:
> + properties:
> + st,syscon:
> + items:
> + items:
> + - description: phandle to the syscon node which encompases the glue register
> + - description: offset of the control register
> + - description: field to set mask in register
> +
> examples:
> - |
> #include <dt-bindings/interrupt-controller/arm-gic.h>
> @@ -161,3 +189,37 @@ examples:
> snps,pbl = <8>;
> phy-mode = "mii";
> };
> +
> + - |
> + #include <dt-bindings/interrupt-controller/arm-gic.h>
> + #include <dt-bindings/clock/stm32mp1-clks.h>
> + #include <dt-bindings/reset/stm32mp1-resets.h>
> + #include <dt-bindings/mfd/stm32h7-rcc.h>
> + //Example 4
> + ethernet3: ethernet@...0a000 {
> + compatible = "st,stm32mp13-dwmac", "snps,dwmac-4.20a";
> + reg = <0x5800a000 0x2000>;
> + reg-names = "stmmaceth";
> + interrupts-extended = <&intc GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>,
> + <&exti 68 IRQ_TYPE_LEVEL_HIGH>;
> + interrupt-names = "macirq",
> + "eth_wake_irq";
> + clock-names = "stmmaceth",
> + "mac-clk-tx",
> + "mac-clk-rx",
> + "eth-ck",
> + "ptp_ref",
> + "ethstp";
> + clocks = <&rcc ETHMAC>,
> + <&rcc ETHTX>,
> + <&rcc ETHRX>,
> + <&rcc ETHCK_K>,
> + <&rcc ETHPTP_K>,
> + <&rcc ETHSTP>;
> + st,syscon = <&syscfg 0x4 0xff0000>;
> + snps,mixed-burst;
> + snps,pbl = <2>;
> + snps,axi-config = <&stmmac_axi_config_1>;
> + snps,tso;
> + phy-mode = "rmii";
> + };
> --
> 2.25.1
>
Download attachment "signature.asc" of type "application/pgp-signature" (229 bytes)
Powered by blists - more mailing lists