| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <72bf11c67219b214b173651f7213f535c5d5f6b0.camel@apitzsch.eu>
Date: Fri, 29 Sep 2023 00:10:30 +0200
From: André Apitzsch <git@...tzsch.eu>
To: Lee Jones <lee@...nel.org>
Cc: Pavel Machek <pavel@....cz>, Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Conor Dooley <conor+dt@...nel.org>, linux-leds@...r.kernel.org,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
phone-devel@...r.kernel.org, ~postmarketos/upstreaming@...ts.sr.ht,
Uwe Kleine-König
<u.kleine-koenig@...gutronix.de>
Subject: Re: [PATCH v4 2/2] leds: add ktd202x driver
Hi Lee Jones,
Am Donnerstag, dem 28.09.2023 um 15:42 +0100 schrieb Lee Jones:
> On Sat, 23 Sep 2023, André Apitzsch wrote:
>
> > This commit adds support for Kinetic KTD2026/7 RGB/White LED
> > driver.
> >
> > Signed-off-by: André Apitzsch <git@...tzsch.eu>
> > ---
> > drivers/leds/rgb/Kconfig | 13 +
> > drivers/leds/rgb/Makefile | 1 +
> > drivers/leds/rgb/leds-ktd202x.c | 625
> > ++++++++++++++++++++++++++++++++++++++++
> > 3 files changed, 639 insertions(+)
> >
> > diff --git a/drivers/leds/rgb/Kconfig b/drivers/leds/rgb/Kconfig
> > index 183bccc06cf3..a6a21f564673 100644
> > --- a/drivers/leds/rgb/Kconfig
> > +++ b/drivers/leds/rgb/Kconfig
> > @@ -14,6 +14,19 @@ config LEDS_GROUP_MULTICOLOR
> > To compile this driver as a module, choose M here: the
> > module
> > will be called leds-group-multicolor.
> >
> > +config LEDS_KTD202X
> > + tristate "LED support for KTD202x Chips"
> > + depends on I2C
> > + depends on OF
> > + select REGMAP_I2C
> > + help
> > + This option enables support for the Kinetic
> > KTD2026/KTD2027
> > + RGB/White LED driver found in different BQ mobile phones.
> > + It is a 3 or 4 channel LED driver programmed via an I2C
> > interface.
> > +
> > + To compile this driver as a module, choose M here: the
> > module
> > + will be called leds-ktd202x.
> > +
> > config LEDS_PWM_MULTICOLOR
> > tristate "PWM driven multi-color LED Support"
> > depends on PWM
> > diff --git a/drivers/leds/rgb/Makefile b/drivers/leds/rgb/Makefile
> > index c11cc56384e7..243f31e4d70d 100644
> > --- a/drivers/leds/rgb/Makefile
> > +++ b/drivers/leds/rgb/Makefile
> > @@ -1,6 +1,7 @@
> > # SPDX-License-Identifier: GPL-2.0
> >
> > obj-$(CONFIG_LEDS_GROUP_MULTICOLOR) += leds-group-multicolor.o
> > +obj-$(CONFIG_LEDS_KTD202X) += leds-ktd202x.o
> > obj-$(CONFIG_LEDS_PWM_MULTICOLOR) += leds-pwm-multicolor.o
> > obj-$(CONFIG_LEDS_QCOM_LPG) += leds-qcom-lpg.o
> > obj-$(CONFIG_LEDS_MT6370_RGB) += leds-mt6370-rgb.o
> > diff --git a/drivers/leds/rgb/leds-ktd202x.c
> > b/drivers/leds/rgb/leds-ktd202x.c
> > new file mode 100644
> > index 000000000000..b328ecd34664
> > --- /dev/null
> > +++ b/drivers/leds/rgb/leds-ktd202x.c
> > @@ -0,0 +1,625 @@
> > +// SPDX-License-Identifier: GPL-2.0-or-later
> > +/*
> > + * Kinetic KTD2026/7 RGB/White LED driver with I2C interface
> > + *
> > + * Copyright 2023 André Apitzsch <git@...tzsch.eu>
> > + *
> > + * Datasheet: https://www.kinet-ic.com/uploads/KTD2026-7-04h.pdf
> > + */
> > +
> > [..]
> > +
> > +static int ktd202x_probe_dt(struct ktd202x *chip)
> > +{
> > + struct device_node *np = dev_of_node(chip->dev), *child;
> > + unsigned int i;
> > + int count, ret;
> > +
> > + chip->num_leds = (int)(unsigned long)of_device_get_match_data(chip->dev);
>
> There are a bunch of recent patches converting these to:
>
> i2c_get_match_data()
>
> ... is that also applicable here?
>
I don't think there is a benefit in using it here.
i2c_get_match_data() requires a "struct i2c_client client", so we would
have to pass that to ktd202x_probe_dt().
Only to replace
chip->num_leds = (int)(unsigned long)of_device_get_match_data(chip->dev);
by
chip->num_leds = (int)(unsigned long)i2c_get_match_data(client);
Best regards,
André
> > + count = of_get_available_child_count(np);
> > + if (!count || count > chip->num_leds)
> > + return -EINVAL;
> > +
> > + regmap_write(chip->regmap, KTD202X_REG_RESET_CONTROL,
> > + KTD202X_RSTR_RESET);
> > +
> > + /* Allow the device to execute the complete reset */
> > + usleep_range(200, 300);
> > +
> > + i = 0;
> > + for_each_available_child_of_node(np, child) {
> > + ret = ktd202x_add_led(chip, child, i);
> > + if (ret)
> > + return ret;
> > + i++;
> > + }
> > +
> > + return 0;
> > +}
> > +
> > +static const struct regmap_config ktd202x_regmap_config = {
> > + .reg_bits = 8,
> > + .val_bits = 8,
> > + .max_register = 0x09,
> > + .cache_type = REGCACHE_FLAT,
> > + .reg_defaults = ktd202x_reg_defaults,
> > + .num_reg_defaults = ARRAY_SIZE(ktd202x_reg_defaults),
> > +};
> > +
> > +static int ktd202x_probe(struct i2c_client *client)
> > +{
> > + struct device *dev = &client->dev;
> > + struct ktd202x *chip;
> > + int count;
> > + int ret;
> > +
> > + count = device_get_child_node_count(dev);
> > + if (!count || count > KTD202X_MAX_LEDS)
> > + return dev_err_probe(dev, -EINVAL,
> > + "Incorrect number of leds
> > (%d)", count);
> > +
> > + chip = devm_kzalloc(dev, struct_size(chip, leds, count),
> > GFP_KERNEL);
> > + if (!chip)
> > + return -ENOMEM;
> > +
> > + mutex_init(&chip->mutex);
> > +
> > + chip->dev = dev;
> > + i2c_set_clientdata(client, chip);
> > +
> > + chip->regmap = devm_regmap_init_i2c(client,
> > &ktd202x_regmap_config);
> > + if (IS_ERR(chip->regmap)) {
> > + ret = dev_err_probe(dev, PTR_ERR(chip->regmap),
> > + "Failed to allocate register
> > map.\n");
> > + goto error;
>
> Where is the mutex first used?
>
> I'd suggest moving mutex_init() as late as possible and omitting as
> many
> of these gotos as you can.
>
> > + }
> > +
> > + chip->regulators[0].supply = "vin";
> > + chip->regulators[1].supply = "vio";
> > + ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(chip-
> > >regulators),
> > + chip->regulators);
> > + if (ret < 0) {
> > + dev_err_probe(dev, ret, "Failed to request
> > regulators.\n");
> > + goto error;
> > + }
> > +
> > + ret = regulator_bulk_enable(ARRAY_SIZE(chip->regulators),
> > + chip->regulators);
> > + if (ret) {
> > + dev_err_probe(dev, ret, "Failed to enable
> > regulators.\n");
> > + goto error;
> > + }
> > +
> > + ret = ktd202x_probe_dt(chip);
> > + if (ret < 0)
> > + goto error_reg;
> > +
> > + ret = regulator_bulk_disable(ARRAY_SIZE(chip->regulators),
> > + chip->regulators);
> > + if (ret) {
> > + dev_err_probe(dev, ret, "Failed to disable
> > regulators.\n");
> > + goto error;
> > + }
> > +
> > + return 0;
> > +
> > +error_reg:
> > + regulator_bulk_disable(ARRAY_SIZE(chip->regulators),
> > + chip->regulators);
> > +
> > +error:
> > + mutex_destroy(&chip->mutex);
> > + return ret;
> > +}
> > +
> > +static void ktd202x_remove(struct i2c_client *client)
> > +{
> > + struct ktd202x *chip = i2c_get_clientdata(client);
> > +
> > + ktd202x_chip_disable(chip);
> > +
> > + mutex_destroy(&chip->mutex);
> > +}
> > +
> > +static void ktd202x_shutdown(struct i2c_client *client)
> > +{
> > + struct ktd202x *chip = i2c_get_clientdata(client);
> > +
> > + /* Reset registers to make sure all off before shutdown */
>
> Grammar.
>
> > + regmap_write(chip->regmap, KTD202X_REG_RESET_CONTROL,
> > + KTD202X_RSTR_RESET);
> > +}
> > +
> > +static const struct of_device_id ktd202x_match_table[] = {
> > + { .compatible = "kinetic,ktd2026", .data = (void
> > *)KTD2026_NUM_LEDS },
> > + { .compatible = "kinetic,ktd2027", .data = (void
> > *)KTD2027_NUM_LEDS },
> > + {},
> > +};
> > +
>
> Remove these line.
>
> > +MODULE_DEVICE_TABLE(of, ktd202x_match_table);
> > +
> > +static struct i2c_driver ktd202x_driver = {
> > + .driver = {
> > + .name = "leds-ktd202x",
> > + .of_match_table = ktd202x_match_table,
> > + },
> > + .probe = ktd202x_probe,
> > + .remove = ktd202x_remove,
> > + .shutdown = ktd202x_shutdown,
> > +};
> > +module_i2c_driver(ktd202x_driver);
> > +
> > +MODULE_AUTHOR("André Apitzsch <git@...tzsch.eu>");
> > +MODULE_DESCRIPTION("Kinetic KTD2026/7 LED driver");
> > +MODULE_LICENSE("GPL");
> >
> > --
> > 2.42.0
> >
>
Powered by blists - more mailing lists