[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20230928070652.330429-9-herve.codina@bootlin.com>
Date: Thu, 28 Sep 2023 09:06:26 +0200
From: Herve Codina <herve.codina@...tlin.com>
To: Herve Codina <herve.codina@...tlin.com>,
"David S. Miller" <davem@...emloft.net>,
Eric Dumazet <edumazet@...gle.com>,
Jakub Kicinski <kuba@...nel.org>,
Paolo Abeni <pabeni@...hat.com>, Andrew Lunn <andrew@...n.ch>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Conor Dooley <conor+dt@...nel.org>,
Linus Walleij <linus.walleij@...aro.org>,
Qiang Zhao <qiang.zhao@....com>, Li Yang <leoyang.li@....com>,
Liam Girdwood <lgirdwood@...il.com>,
Mark Brown <broonie@...nel.org>,
Jaroslav Kysela <perex@...ex.cz>,
Takashi Iwai <tiwai@...e.com>,
Shengjiu Wang <shengjiu.wang@...il.com>,
Xiubo Li <Xiubo.Lee@...il.com>,
Fabio Estevam <festevam@...il.com>,
Nicolin Chen <nicoleotsuka@...il.com>,
Christophe Leroy <christophe.leroy@...roup.eu>,
Randy Dunlap <rdunlap@...radead.org>
Cc: netdev@...r.kernel.org, linuxppc-dev@...ts.ozlabs.org,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-gpio@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
alsa-devel@...a-project.org, Simon Horman <horms@...nel.org>,
Christophe JAILLET <christophe.jaillet@...adoo.fr>,
Thomas Petazzoni <thomas.petazzoni@...tlin.com>,
Rob Herring <robh@...nel.org>
Subject: [PATCH v7 08/30] dt-bindings: soc: fsl: cpm_qe: cpm1-scc-qmc: Add support for QMC HDLC
The QMC (QUICC mutichannel controller) is a controller present in some
PowerQUICC SoC such as MPC885.
The QMC HDLC uses the QMC controller to transfer HDLC data.
Additionally, a framer can be connected to the QMC HDLC.
If present, this framer is the interface between the TDM bus used by the
QMC HDLC and the E1/T1 line.
The QMC HDLC can use this framer to get information about the E1/T1 line
and configure the E1/T1 line.
Signed-off-by: Herve Codina <herve.codina@...tlin.com>
Reviewed-by: Rob Herring <robh@...nel.org>
---
.../soc/fsl/cpm_qe/fsl,cpm1-scc-qmc.yaml | 30 +++++++++++++++++++
1 file changed, 30 insertions(+)
diff --git a/Documentation/devicetree/bindings/soc/fsl/cpm_qe/fsl,cpm1-scc-qmc.yaml b/Documentation/devicetree/bindings/soc/fsl/cpm_qe/fsl,cpm1-scc-qmc.yaml
index 82d9beb48e00..e802e25923aa 100644
--- a/Documentation/devicetree/bindings/soc/fsl/cpm_qe/fsl,cpm1-scc-qmc.yaml
+++ b/Documentation/devicetree/bindings/soc/fsl/cpm_qe/fsl,cpm1-scc-qmc.yaml
@@ -101,6 +101,32 @@ patternProperties:
Channel assigned Rx time-slots within the Rx time-slots routed by the
TSA to this cell.
+ compatible:
+ items:
+ - enum:
+ - fsl,mpc885-scc-qmc-hdlc
+ - fsl,mpc866-scc-qmc-hdlc
+ - const: fsl,cpm1-scc-qmc-hdlc
+ - const: fsl,qmc-hdlc
+
+ fsl,framer:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description:
+ phandle to the framer node. The framer is in charge of an E1/T1 line
+ interface connected to the TDM bus. It can be used to get the E1/T1 line
+ status such as link up/down.
+
+ allOf:
+ - if:
+ properties:
+ compatible:
+ not:
+ contains:
+ const: fsl,qmc-hdlc
+ then:
+ properties:
+ fsl,framer: false
+
required:
- reg
- fsl,tx-ts-mask
@@ -155,9 +181,13 @@ examples:
channel@19 {
/* Ch19 : 8 TS (TS 8..15) from all routed from TSA */
+ compatible = "fsl,mpc885-scc-qmc-hdlc",
+ "fsl,cpm1-scc-qmc-hdlc",
+ "fsl,qmc-hdlc";
reg = <19>;
fsl,operational-mode = "hdlc";
fsl,tx-ts-mask = <0x00000000 0x0000ff00>;
fsl,rx-ts-mask = <0x00000000 0x0000ff00>;
+ fsl,framer = <&framer>;
};
};
--
2.41.0
Powered by blists - more mailing lists