| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <100ef77c-2343-4e73-8b89-748ae9697496@xs4all.nl>
Date: Thu, 28 Sep 2023 14:04:56 +0200
From: Hans Verkuil <hverkuil-cisco@...all.nl>
To: Jack Zhu <jack.zhu@...rfivetech.com>,
Mauro Carvalho Chehab <mchehab@...nel.org>,
Robert Foss <rfoss@...nel.org>,
Todor Tomov <todor.too@...il.com>,
"bryan.odonoghue@...aro.org" <bryan.odonoghue@...aro.org>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Conor Dooley <conor+dt@...nel.org>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
Philipp Zabel <p.zabel@...gutronix.de>,
Laurent Pinchart <laurent.pinchart@...asonboard.com>
Cc: "linux-media@...r.kernel.org" <linux-media@...r.kernel.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
"devicetree@...r.kernel.org" <devicetree@...r.kernel.org>,
"linux-staging@...ts.linux.dev" <linux-staging@...ts.linux.dev>,
Changhuang Liang <changhuang.liang@...rfivetech.com>
Subject: Re: [PATCH v9 0/8] Add StarFive Camera Subsystem driver
Hi Jack,
On 28/09/2023 10:40, Jack Zhu wrote:
>
>
> On 2023/9/28 16:22, Hans Verkuil wrote:
>> On 28/09/2023 10:12, Jack Zhu wrote:
>>>
>>>
>>> On 2023/9/15 17:26, Hans Verkuil wrote:
>>>> On 14/09/2023 05:15, Jack Zhu wrote:
>>>>> Hi,
>>>>>
>>>>> This series is the v9 series that attempts to support the Camera Subsystem
>>>>> found on StarFive JH7110 SoC.
>>>>>
>>>>> This series is based on top of the master branch of media_stage repository.
>>>>>
>>>>> The following are the media graph for the device and the v4l2-compliance
>>>>> output.
>>>>>
>>>>> ===========================================================================
>>>>> [the media graph]:
>>>>>
>>>>> digraph board {
>>>>> rankdir=TB
>>>>> n00000001 [label="{{<port0> 0} | stf_isp\n/dev/v4l-subdev0 | {<port1> 1}}", shape=Mrecord, style=filled, fillcolor=green]
>>>>> n00000001:port1 -> n00000008 [style=dashed]
>>>>> n00000004 [label="capture_raw\n/dev/video0", shape=box, style=filled, fillcolor=yellow]
>>>>> n00000008 [label="capture_yuv\n/dev/video1", shape=box, style=filled, fillcolor=yellow]
>>>>> n0000000e [label="{{<port0> 0} | cdns_csi2rx.19800000.csi-bridge\n | {<port1> 1 | <port2> 2 | <port3> 3 | <port4> 4}}", shape=Mrecord, style=filled, fillcolor=green]
>>>>> n0000000e:port1 -> n00000001:port0 [style=dashed]
>>>>> n0000000e:port1 -> n00000004 [style=dashed]
>>>>> n00000018 [label="{{} | imx219 6-0010\n/dev/v4l-subdev1 | {<port0> 0}}", shape=Mrecord, style=filled, fillcolor=green]
>>>>> n00000018:port0 -> n0000000e:port0 [style=bold]
>>>>> }
>>>>>
>>>>> [the device topology]:
>>>>>
>>>>> Media controller API version 6.5.0
>>>>>
>>>>> Media device information
>>>>> ------------------------
>>>>> driver starfive-camss
>>>>> model Starfive Camera Subsystem
>>>>> serial
>>>>> bus info platform:19840000.camss
>>>>> hw revision 0x0
>>>>> driver version 6.5.0
>>>>>
>>>>> Device topology
>>>>> - entity 1: stf_isp (2 pads, 2 links)
>>>>> type V4L2 subdev subtype Unknown flags 0
>>>>> device node name /dev/v4l-subdev0
>>>>> pad0: Sink
>>>>> [fmt:SRGGB10_1X10/1920x1080 field:none colorspace:srgb
>>>>> crop.bounds:(0,0)/1920x1080
>>>>> crop:(0,0)/1920x1080]
>>>>> <- "cdns_csi2rx.19800000.csi-bridge":1 []
>>>>> pad1: Source
>>>>> [fmt:YUYV8_1_5X8/1920x1080 field:none colorspace:srgb
>>>>> crop.bounds:(0,0)/1920x1080
>>>>> crop:(0,0)/1920x1080]
>>>>> -> "capture_yuv":0 []
>>>>>
>>>>> - entity 4: capture_raw (1 pad, 1 link)
>>>>> type Node subtype V4L flags 0
>>>>> device node name /dev/video0
>>>>> pad0: Sink
>>>>> <- "cdns_csi2rx.19800000.csi-bridge":1 []
>>>>>
>>>>> - entity 8: capture_yuv (1 pad, 1 link)
>>>>> type Node subtype V4L flags 0
>>>>> device node name /dev/video1
>>>>> pad0: Sink
>>>>> <- "stf_isp":1 []
>>>>>
>>>>> - entity 14: cdns_csi2rx.19800000.csi-bridge (5 pads, 3 links)
>>>>> type V4L2 subdev subtype Unknown flags 0
>>>>> pad0: Sink
>>>>> <- "imx219 6-0010":0 [ENABLED,IMMUTABLE]
>>>>> pad1: Source
>>>>> -> "stf_isp":0 []
>>>>> -> "capture_raw":0 []
>>>>> pad2: Source
>>>>> pad3: Source
>>>>> pad4: Source
>>>>>
>>>>> - entity 24: imx219 6-0010 (1 pad, 1 link)
>>>>> type V4L2 subdev subtype Sensor flags 0
>>>>> device node name /dev/v4l-subdev1
>>>>> pad0: Source
>>>>> [fmt:SRGGB10_1X10/3280x2464 field:none colorspace:srgb xfer:srgb ycbcr:601 quantization:full-range
>>>>> crop.bounds:(8,8)/3280x2464
>>>>> crop:(8,8)/3280x2464]
>>>>> -> "cdns_csi2rx.19800000.csi-bridge":0 [ENABLED,IMMUTABLE]
>>>>>
>>>>> ===========================================================================
>>>>> [the v4l2-compliance output]:
>>>>>
>>>>> v4l2-compliance 1.24.1, 64 bits, 64-bit time_t
>>>>
>>>> This v4l2-compliance version is from a distro. For driver acceptance you
>>>> must test with a v4l2-compliance compiled from the git repo (git://linuxtv.org/v4l-utils.git).
>>>>
>>>> Also, since this driver uses the media controller, you must run v4l2-compliance
>>>> with the -m /dev/mediaX option. This will test the compliance of all devices
>>>> reported by the media controller.
>>>>
>>>>>
>>>>> Compliance test for stf camss device /dev/video1:
>>>>>
>>>>> Driver Info:
>>>>> Driver name : stf camss
>>>>
>>>> The module is called starfive-camss, so shouldn't the driver name reported here
>>>> be the same?
>>>>
>>>>> Card type : Starfive Camera Subsystem
>>>>> Bus info : platform:19840000.camss
>>>>> Driver version : 6.5.0
>>>>> Capabilities : 0x84200001
>>>>> Video Capture
>>>>> Streaming
>>>>> Extended Pix Format
>>>>> Device Capabilities
>>>>> Device Caps : 0x04200001
>>>>> Video Capture
>>>>> Streaming
>>>>> Extended Pix Format
>>>>> Media Driver Info:
>>>>> Driver name : starfive-camss
>>>>
>>>> It's correct in the media controller information.
>>>>
>>>>> Model : Starfive Camera Subsystem
>>>>> Serial :
>>>>> Bus info : platform:19840000.camss
>>>>> Media version : 6.5.0
>>>>> Hardware revision: 0x00000000 (0)
>>>>> Driver version : 6.5.0
>>>>> Interface Info:
>>>>> ID : 0x0300000a
>>>>> Type : V4L Video
>>>>> Entity Info:
>>>>> ID : 0x00000008 (8)
>>>>> Name : capture_yuv
>>>>> Function : V4L2 I/O
>>>>> Pad 0x01000009 : 0: Sink
>>>>> Link 0x0200000c: from remote pad 0x1000003 of entity 'stf_isp' (Unknown Function (00004009)): Data, Enabled
>>>>
>>>> Hmm, this reports "Unknown Function". I bet that when you run v4l2-compliance
>>>> with the -m option it will fail on this. If not, then that's likely a bug in
>>>> the compliance test, please let me know if that's the case.
>>>>
>>>
>>> Hi Hans,
>>>
>>> The following is the latest test log, which does not report a failure, but
>>> also reports "Unknown Function".
>>>
>>> I make the following settings in the stf-isp.c file:
>>> v4l2_subdev.entity.function = MEDIA_ENT_F_PROC_VIDEO_ISP;
>>>
>>
>> Can you post the output of:
>>
>> v4l2-compliance --verbose -M /dev/media0
>>
>
> Output log of the above command:
>
> #
> # v4l2-compliance --verbose -M /dev/media0
> v4l2-compliance 1.25.0, 64 bits, 64-bit time_t
>
> Compliance test for starfive-camss device /dev/media0:
>
> Media Driver Info:
> Driver name : starfive-camss
> Model : Starfive Camera Subsystem
> Serial :
> Bus info : platform:19840000.camss
> Media version : 6.5.0
> Hardware revision: 0x00000000 (0)
> Driver version : 6.5.0
>
> Required ioctls:
> test MEDIA_IOC_DEVICE_INFO: OK
> test invalid ioctls: OK
>
> Allow for multiple opens:
> test second /dev/media0 open: OK
> test MEDIA_IOC_DEVICE_INFO: OK
> test for unlimited opens: OK
>
> Media Controller ioctls:
> Entity: 0x00000001 (Name: 'stf_isp', Function: Unknown Function (00004009))
> Entity: 0x00000004 (Name: 'capture_raw', Function: V4L2 I/O)
> Entity: 0x00000008 (Name: 'capture_yuv', Function: V4L2 I/O)
> Entity: 0x0000000e (Name: 'cdns_csi2rx.19800000.csi-bridge', Function: Video Interface Bridge)
> Entity: 0x00000018 (Name: 'imx219 6-0010', Function: Camera Sensor)
> Interface: 0x03000006 (Type: V4L Video, DevPath: /dev/video0)
> Interface: 0x0300000a (Type: V4L Video, DevPath: /dev/video1)
> Interface: 0x0300001c (Type: V4L Sub-Device, DevPath: /dev/v4l-subdev0)
> Interface: 0x0300001e (Type: V4L Sub-Device, DevPath: /dev/v4l-subdev1)
> Pad: 0x01000002 (0, stf_isp, Sink)
> Pad: 0x01000003 (1, stf_isp, Source)
> Pad: 0x01000005 (0, capture_raw, Sink)
> Pad: 0x01000009 (0, capture_yuv, Sink)
> Pad: 0x0100000f (0, cdns_csi2rx.19800000.csi-bridge, Sink)
> Pad: 0x01000010 (1, cdns_csi2rx.19800000.csi-bridge, Source)
> Pad: 0x01000011 (2, cdns_csi2rx.19800000.csi-bridge, Source)
> Pad: 0x01000012 (3, cdns_csi2rx.19800000.csi-bridge, Source)
> Pad: 0x01000013 (4, cdns_csi2rx.19800000.csi-bridge, Source)
> Pad: 0x01000019 (0, imx219 6-0010, Source)
> Interface Link: 0x02000007 (capture_raw to /dev/video0)
> Interface Link: 0x0200000b (capture_yuv to /dev/video1)
> Data Link: 0x0200000c (stf_isp:1 -> capture_yuv:0, Data, Enabled)
> Data Link: 0x02000014 (cdns_csi2rx.19800000.csi-bridge:1 -> stf_isp:0, Data, Enabled)
> Data Link: 0x02000016 (cdns_csi2rx.19800000.csi-bridge:1 -> capture_raw:0, Data)
> Data Link: 0x0200001a (imx219 6-0010:0 -> cdns_csi2rx.19800000.csi-bridge:0, Data, Enabled, Immutable)
> Interface Link: 0x0200001d (stf_isp to /dev/v4l-subdev0)
> Interface Link: 0x0200001f (imx219 6-0010 to /dev/v4l-subdev1)
> test MEDIA_IOC_G_TOPOLOGY: OK
> Entities: 5 Interfaces: 4 Pads: 10 Links: 8
> Entity: 0x00000001 (Name: 'stf_isp', Type: Unknown V4L2 Sub-Device, DevPath: /dev/v4l-subdev0)
> Entity: 0x00000004 (Name: 'capture_raw', Type: V4L2 I/O, DevPath: /dev/video0)
> Entity: 0x00000008 (Name: 'capture_yuv', Type: V4L2 I/O, DevPath: /dev/video1)
> Entity: 0x0000000e (Name: 'cdns_csi2rx.19800000.csi-bridge', Type: Unknown V4L2 Sub-Device)
> Entity: 0x00000018 (Name: 'imx219 6-0010', Type: Camera Sensor, DevPath: /dev/v4l-subdev1)
> test MEDIA_IOC_ENUM_ENTITIES/LINKS: OK
> test MEDIA_IOC_SETUP_LINK: OK
>
> Total for starfive-camss device /dev/media0: 8, Succeeded: 8, Failed: 0, Warnings: 0
Much appreciated. I found several logic bugs in v4l-utils that hid this failure.
It is now fixed in the v4l-utils git repo: https://git.linuxtv.org/v4l-utils.git/log/
This also adds the missing support for MEDIA_ENT_F_PROC_VIDEO_ISP.
If you compile v4l2-compliance from the git repo, then this should now work fine.
Regards,
Hans
Powered by blists - more mailing lists