[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20230929200844.23316-2-fr0st61te@gmail.com>
Date: Fri, 29 Sep 2023 23:08:43 +0300
From: Ivan Mikhaylov <fr0st61te@...il.com>
To: Jonathan Cameron <jic23@...nel.org>,
Lars-Peter Clausen <lars@...afoo.de>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Conor Dooley <conor+dt@...nel.org>
Cc: linux-iio@...r.kernel.org, linux-kernel@...r.kernel.org,
devicetree@...r.kernel.org, Ivan Mikhaylov <fr0st61te@...il.com>
Subject: [PATCH v2 1/2] dt-bindings: adc: provide max34408/9 device tree binding document
The hardware binding for i2c current monitoring device with overcurrent
control.
Signed-off-by: Ivan Mikhaylov <fr0st61te@...il.com>
---
.../bindings/iio/adc/maxim,max34408.yaml | 101 ++++++++++++++++++
1 file changed, 101 insertions(+)
create mode 100644 Documentation/devicetree/bindings/iio/adc/maxim,max34408.yaml
diff --git a/Documentation/devicetree/bindings/iio/adc/maxim,max34408.yaml b/Documentation/devicetree/bindings/iio/adc/maxim,max34408.yaml
new file mode 100644
index 000000000000..cdf89fa4c80e
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/maxim,max34408.yaml
@@ -0,0 +1,101 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/maxim,max34408.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Two- and four-channel current monitors with overcurrent control
+
+maintainers:
+ - Ivan Mikhaylov <fr0st61te@...il.com>
+
+description: |
+ The MAX34408/MAX34409 are two- and four-channel current monitors that are
+ configured and monitored with a standard I2C/SMBus serial interface. Each
+ unidirectional current sensor offers precision high-side operation with a
+ low full-scale sense voltage. The devices automatically sequence through
+ two or four channels and collect the current-sense samples and average them
+ to reduce the effect of impulse noise. The raw ADC samples are compared to
+ user-programmable digital thresholds to indicate overcurrent conditions.
+ Overcurrent conditions trigger a hardware output to provide an immediate
+ indication to shut down any necessary external circuitry.
+
+ Specifications about the devices can be found at:
+ https://www.analog.com/media/en/technical-documentation/data-sheets/MAX34408-MAX34409.pdf
+
+properties:
+ compatible:
+ enum:
+ - maxim,max34408
+ - maxim,max34409
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ maxim,input1-rsense-val-micro-ohms:
+ description:
+ Adjust the Rsense value to monitor higher or lower current levels for
+ input 1.
+ enum: [250, 500, 1000, 5000, 10000, 50000, 100000, 200000, 500000]
+ default: 1000
+
+ maxim,input2-rsense-val-micro-ohms:
+ description:
+ Adjust the Rsense value to monitor higher or lower current levels for
+ input 2.
+ enum: [250, 500, 1000, 5000, 10000, 50000, 100000, 200000, 500000]
+ default: 1000
+
+ maxim,input3-rsense-val-micro-ohms:
+ description:
+ Adjust the Rsense value to monitor higher or lower current levels for
+ input 3.
+ enum: [250, 500, 1000, 5000, 10000, 50000, 100000, 200000, 500000]
+ default: 1000
+
+ maxim,input4-rsense-val-micro-ohms:
+ description:
+ Adjust the Rsense value to monitor higher or lower current levels for
+ input 4.
+ enum: [250, 500, 1000, 5000, 10000, 50000, 100000, 200000, 500000]
+ default: 1000
+
+ maxim,shtdn:
+ description:
+ Shutdown Output. Open-drain output. This output transitions to high impedance
+ when any of the digital comparator thresholds are exceeded as long as the ENA
+ pin is high.
+ type: boolean
+
+ maxim,ena:
+ description:
+ SHTDN Enable Input. CMOS digital input. Connect to GND to clear the latch and
+ unconditionally deassert (force low) the SHTDN output and reset the shutdown
+ delay. Connect to VDD to enable normal latch operation of the SHTDN output.
+ type: boolean
+
+ supply-vdd: true
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ i2c {
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ adc@1e {
+ compatible = "maxim,max34409";
+ reg = <0x1e>;
+ maxim,input1-rsense-val-micro-ohms = <5000>;
+ maxim,input2-rsense-val-micro-ohms = <10000>;
+ };
+ };
--
2.42.0
Powered by blists - more mailing lists