lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <1695970830-12331-3-git-send-email-quic_ekangupt@quicinc.com>
Date:   Fri, 29 Sep 2023 12:30:28 +0530
From:   Ekansh Gupta <quic_ekangupt@...cinc.com>
To:     <srinivas.kandagatla@...aro.org>, <linux-arm-msm@...r.kernel.org>
CC:     Ekansh Gupta <quic_ekangupt@...cinc.com>,
        <ekangupt@....qualcomm.com>, <gregkh@...uxfoundation.org>,
        <linux-kernel@...r.kernel.org>, <fastrpc.upstream@....qualcomm.com>
Subject: [PATCH v1 2/4] misc: fastrpc: Add polling mode support for fastRPC driver

For any remote call to DSP, after sending an invocation message,
fastRPC driver waits for glink response and during this time the
CPU can go into low power modes. Adding a polling mode support
with which fastRPC driver will poll continuously on a memory
after sending a message to remote subsystem which will eliminate
CPU wakeup and scheduling latencies and reduce fastRPC overhead.
With this change, DSP always sends a glink response which will
get ignored if polling mode didn't time out.

Signed-off-by: Ekansh Gupta <quic_ekangupt@...cinc.com>
---
 drivers/misc/fastrpc.c | 49 +++++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 49 insertions(+)

diff --git a/drivers/misc/fastrpc.c b/drivers/misc/fastrpc.c
index 3facffd..b5f3734 100644
--- a/drivers/misc/fastrpc.c
+++ b/drivers/misc/fastrpc.c
@@ -109,6 +109,8 @@
 #define FASTRPC_RSP_VERSION2 2
 /* Early wake up poll completion number received from remoteproc */
 #define FASTRPC_EARLY_WAKEUP_POLL (0xabbccdde)
+/* Poll response number from remote processor for call completion */
+#define FASTRPC_POLL_RESPONSE (0xdecaf)
 /* timeout in us for polling until memory barrier */
 #define FASTRPC_POLL_TIME_MEM_UPDATE (500)
 /* timeout in us for busy polling after early response from remoteproc */
@@ -380,10 +382,14 @@ struct fastrpc_user {
 	struct fastrpc_buf *init_mem;
 
 	u32 profile;
+	/* Threads poll for specified timeout and fall back to glink wait */
+	u32 poll_timeout;
 	int tgid;
 	int pd;
 	bool is_secure_dev;
 	bool sharedcb;
+	/* If set, threads will poll for DSP response instead of glink wait */
+	bool poll_mode;
 	/* Lock for lists */
 	spinlock_t lock;
 	/* lock for allocations */
@@ -1374,6 +1380,11 @@ static int poll_for_remote_response(struct fastrpc_invoke_ctx *ctx, u32 timeout)
 			/* Remote processor sent early response */
 			err = 0;
 			break;
+		} else if (*poll == FASTRPC_POLL_RESPONSE) {
+			err = 0;
+			ctx->is_work_done = true;
+			ctx->retval = 0;
+			break;
 		}
 		if (jj == FASTRPC_POLL_TIME_MEM_UPDATE) {
 			/* Wait for DSP to finish updating poll memory */
@@ -1449,6 +1460,15 @@ static void fastrpc_wait_for_completion(struct fastrpc_invoke_ctx *ctx,
 			if (*ptr_interrupted || ctx->is_work_done)
 				return;
 			break;
+		case POLL_MODE:
+			err = poll_for_remote_response(ctx, ctx->fl->poll_timeout);
+
+			/* If polling timed out, move to normal response state */
+			if (err)
+				ctx->rsp_flags = NORMAL_RESPONSE;
+			else
+				*ptr_interrupted = 0;
+			break;
 		default:
 			*ptr_interrupted = -EBADR;
 			dev_err(ctx->fl->sctx->dev, "unsupported response type:0x%x\n", ctx->rsp_flags);
@@ -2065,6 +2085,32 @@ static int fastrpc_invoke(struct fastrpc_user *fl, char __user *argp)
 	return err;
 }
 
+static int fastrpc_manage_poll_mode(struct fastrpc_user *fl, u32 enable, u32 timeout)
+{
+	const unsigned int MAX_POLL_TIMEOUT_US = 10000;
+
+	if ((fl->cctx->domain_id != CDSP_DOMAIN_ID) || (fl->pd != USER_PD)) {
+		dev_err(&fl->cctx->rpdev->dev, "poll mode only allowed for dynamic CDSP process\n");
+		return -EPERM;
+	}
+	if (timeout > MAX_POLL_TIMEOUT_US) {
+		dev_err(&fl->cctx->rpdev->dev, "poll timeout %u is greater than max allowed value %u\n",
+			timeout, MAX_POLL_TIMEOUT_US);
+		return -EBADMSG;
+	}
+	spin_lock(&fl->lock);
+	if (enable) {
+		fl->poll_mode = true;
+		fl->poll_timeout = timeout;
+	} else {
+		fl->poll_mode = false;
+		fl->poll_timeout = 0;
+	}
+	spin_unlock(&fl->lock);
+	dev_info(&fl->cctx->rpdev->dev, "updated poll mode to %d, timeout %u\n", enable, timeout);
+	return 0;
+}
+
 static int fastrpc_internal_control(struct fastrpc_user *fl,
 					struct fastrpc_internal_control *cp)
 {
@@ -2079,6 +2125,9 @@ static int fastrpc_internal_control(struct fastrpc_user *fl,
 	case FASTRPC_CONTROL_SMMU:
 		fl->sharedcb = cp->smmu.sharedcb;
 		break;
+	case FASTRPC_CONTROL_RPC_POLL:
+		err = fastrpc_manage_poll_mode(fl, cp->lp.enable, cp->lp.latency);
+		break;
 	default:
 		err = -EBADRQC;
 		break;
-- 
2.7.4

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ