Message-ID: <20230929003901.15086-5-quic_amelende@quicinc.com>
Date:   Thu, 28 Sep 2023 17:38:57 -0700
From:   Anjelique Melendez <quic_amelende@...cinc.com>
To:     <pavel@....cz>, <lee@...nel.org>, <thierry.reding@...il.com>,
        <robh+dt@...nel.org>, <krzysztof.kozlowski+dt@...aro.org>,
        <conor+dt@...nel.org>, <agross@...nel.org>, <andersson@...nel.org>
CC:     <luca.weiss@...rphone.com>, <konrad.dybcio@...aro.org>,
        <u.kleine-koenig@...gutronix.de>, <quic_subbaram@...cinc.com>,
        <quic_gurus@...cinc.com>, <linux-leds@...r.kernel.org>,
        <devicetree@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
        <linux-arm-msm@...r.kernel.org>, <linux-pwm@...r.kernel.org>,
        <kernel@...cinc.com>,
        Anjelique Melendez <quic_amelende@...cinc.com>
Subject: [PATCH v5 4/7] leds: rgb: leds-qcom-lpg: Add support for single SDAM PPG

In some PMICs like pmi632, the pattern look up table (LUT) and LPG
configuration is stored in a single SDAM module instead of LUT
peripheral. Currently, PMICs without LUT peripheral will not be
able to produce LED patterns.

Add support for PBS Pattern Generation (PPG), which is the feature
that allows PMICs without LUT peripherals to produce LED patterns
from SDAM module. PPG uses the Qualcomm Programmable Boot
Sequencer (PBS) to trigger LED pattern sequences.

Signed-off-by: Anjelique Melendez <quic_amelende@...cinc.com>
---
 drivers/leds/rgb/leds-qcom-lpg.c | 282 ++++++++++++++++++++++++++++---
 1 file changed, 261 insertions(+), 21 deletions(-)

diff --git a/drivers/leds/rgb/leds-qcom-lpg.c b/drivers/leds/rgb/leds-qcom-lpg.c
index df469aaa7e6e..4d87686f916c 100644
--- a/drivers/leds/rgb/leds-qcom-lpg.c
+++ b/drivers/leds/rgb/leds-qcom-lpg.c
@@ -8,11 +8,13 @@
 #include <linux/bitfield.h>
 #include <linux/led-class-multicolor.h>
 #include <linux/module.h>
+#include <linux/nvmem-consumer.h>
 #include <linux/of.h>
 #include <linux/platform_device.h>
 #include <linux/pwm.h>
 #include <linux/regmap.h>
 #include <linux/slab.h>
+#include <linux/soc/qcom/qcom-pbs.h>
 
 #define LPG_SUBTYPE_REG		0x05
 #define  LPG_SUBTYPE_LPG	0x2
@@ -39,6 +41,8 @@
 #define PWM_SEC_ACCESS_REG	0xd0
 #define PWM_DTEST_REG(x)	(0xe2 + (x) - 1)
 
+#define SDAM_REG_PBS_SEQ_EN		0x42
+
 #define TRI_LED_SRC_SEL		0x45
 #define TRI_LED_EN_CTL		0x46
 #define TRI_LED_ATC_CTL		0x47
@@ -48,9 +52,25 @@
 
 #define LPG_RESOLUTION_9BIT	BIT(9)
 #define LPG_RESOLUTION_15BIT	BIT(15)
+#define PPG_MAX_LED_BRIGHTNESS	255
+
 #define LPG_MAX_M		7
 #define LPG_MAX_PREDIV		6
 
+#define DEFAULT_TICK_DURATION_US	7800
+#define RAMP_STEP_DURATION(x)		(((x) * 1000 / DEFAULT_TICK_DURATION_US) & 0xff)
+
+/* LPG common config settings for PPG */
+#define SDAM_REG_RAMP_STEP_DURATION		0x47
+#define SDAM_LPG_SDAM_LUT_PATTERN_OFFSET	0x80
+
+/* LPG per channel config settings for PPG */
+#define SDAM_LUT_EN_OFFSET			0x0
+#define SDAM_PATTERN_CONFIG_OFFSET		0x1
+#define SDAM_END_INDEX_OFFSET			0x3
+#define SDAM_START_INDEX_OFFSET		0x4
+#define SDAM_PBS_SCRATCH_LUT_COUNTER_OFFSET	0x6
+
 struct lpg_channel;
 struct lpg_data;
 
@@ -64,7 +84,10 @@ struct lpg_data;
  * @lut_base:	base address of the LUT block (optional)
  * @lut_size:	number of entries in the LUT block
  * @lut_bitmap:	allocation bitmap for LUT entries
- * @triled_base: base address of the TRILED block (optional)
+ * @pbs_dev:	PBS device
+ * @lpg_chan_sdam:	LPG SDAM peripheral device
+ * @pbs_en_bitmap:	bitmap for tracking PBS triggers
+ * @triled_base:	base address of the TRILED block (optional)
  * @triled_src:	power-source for the TRILED
  * @triled_has_atc_ctl:	true if there is TRI_LED_ATC_CTL register
  * @triled_has_src_sel:	true if there is TRI_LED_SRC_SEL register
@@ -85,6 +108,10 @@ struct lpg {
 	u32 lut_size;
 	unsigned long *lut_bitmap;
 
+	struct pbs_dev *pbs_dev;
+	struct nvmem_device *lpg_chan_sdam;
+	unsigned long pbs_en_bitmap;
+
 	u32 triled_base;
 	u32 triled_src;
 	bool triled_has_atc_ctl;
@@ -101,6 +128,8 @@ struct lpg {
  * @triled_mask: mask in TRILED to enable this channel
  * @lut_mask:	mask in LUT to start pattern generator for this channel
  * @subtype:	PMIC hardware block subtype
+ * @sdam_offset:	Channel offset in LPG SDAM
+ * @lpg_idx:	index of the channel
  * @in_use:	channel is exposed to LED framework
  * @color:	color of the LED attached to this channel
  * @dtest_line:	DTEST line for output, or 0 if disabled
@@ -112,6 +141,7 @@ struct lpg {
  * @pre_div_sel: divider selector of the reference clock
  * @pre_div_exp: exponential divider of the reference clock
  * @pwm_resolution_sel:	pwm resolution selector
+ * @pattern_set: true when setting pattern
  * @ramp_enabled: duty cycle is driven by iterating over lookup table
  * @ramp_ping_pong: reverse through pattern, rather than wrapping to start
  * @ramp_oneshot: perform only a single pass over the pattern
@@ -129,6 +159,8 @@ struct lpg_channel {
 	unsigned int triled_mask;
 	unsigned int lut_mask;
 	unsigned int subtype;
+	u32 sdam_offset;
+	u32 lpg_idx;
 
 	bool in_use;
 
@@ -146,6 +178,7 @@ struct lpg_channel {
 	unsigned int pre_div_exp;
 	unsigned int pwm_resolution_sel;
 
+	bool pattern_set;
 	bool ramp_enabled;
 	bool ramp_ping_pong;
 	bool ramp_oneshot;
@@ -180,8 +213,10 @@ struct lpg_led {
  * struct lpg_channel_data - per channel initialization data
  * @base:		base address for PWM channel registers
  * @triled_mask:	bitmask for controlling this channel in TRILED
+ * @sdam_offset:	Channel offset in LPG SDAM
  */
 struct lpg_channel_data {
+	unsigned int sdam_offset;
 	unsigned int base;
 	u8 triled_mask;
 };
@@ -206,6 +241,75 @@ struct lpg_data {
 	const struct lpg_channel_data *channels;
 };
 
+#define PBS_SW_TRIG_BIT		BIT(0)
+
+static int lpg_clear_pbs_trigger(struct lpg_channel *chan)
+{
+	u8 val = 0;
+	int rc;
+
+	clear_bit(chan->lpg_idx, &chan->lpg->pbs_en_bitmap);
+	if (!chan->lpg->pbs_en_bitmap) {
+		rc = nvmem_device_write(chan->lpg->lpg_chan_sdam, SDAM_REG_PBS_SEQ_EN, 1, &val);
+		if (rc < 0)
+			return rc;
+	}
+
+	return 0;
+}
+
+static int lpg_set_pbs_trigger(struct lpg_channel *chan)
+{
+	u8 val = PBS_SW_TRIG_BIT;
+	int rc;
+
+	if (!chan->lpg->pbs_en_bitmap) {
+		rc = nvmem_device_write(chan->lpg->lpg_chan_sdam, SDAM_REG_PBS_SEQ_EN, 1, &val);
+		if (rc < 0)
+			return rc;
+
+		rc = qcom_pbs_trigger_event(chan->lpg->pbs_dev, val);
+		if (rc < 0)
+			return rc;
+	}
+	set_bit(chan->lpg_idx, &chan->lpg->pbs_en_bitmap);
+
+	return 0;
+}
+
+static int lpg_sdam_configure_triggers(struct lpg_channel *chan, bool set_trig)
+{
+	u32 addr = SDAM_LUT_EN_OFFSET + chan->sdam_offset;
+	u8 val;
+	int rc;
+
+	if (chan->lpg->lut_base)
+		return 0;
+
+	if (set_trig) {
+		val = 1;
+		rc = nvmem_device_write(chan->lpg->lpg_chan_sdam, addr, 1, &val);
+		if (rc < 0)
+			return rc;
+
+		rc = lpg_set_pbs_trigger(chan);
+		if (rc < 0)
+			return rc;
+		chan->pattern_set = false;
+	} else {
+		val = 0;
+		rc = nvmem_device_write(chan->lpg->lpg_chan_sdam, addr, 1, &val);
+		if (rc < 0)
+			return rc;
+
+		rc = lpg_clear_pbs_trigger(chan);
+		if (rc < 0)
+			return rc;
+	}
+
+	return 0;
+}
+
 static int triled_set(struct lpg *lpg, unsigned int mask, unsigned int enable)
 {
 	/* Skip if we don't have a triled block */
@@ -216,6 +320,41 @@ static int triled_set(struct lpg *lpg, unsigned int mask, unsigned int enable)
 				  mask, enable);
 }
 
+static int lpg_lut_store_sdam(struct lpg *lpg, struct led_pattern *pattern,
+			 size_t len, unsigned int *lo_idx, unsigned int *hi_idx)
+{
+	unsigned int idx;
+	u8 brightness;
+	int i, rc;
+	u16 addr;
+
+	if (len > lpg->lut_size) {
+		dev_err(lpg->dev, "Pattern length (%zu) exceeds maximum pattern length (%d)\n",
+			len, lpg->lut_size);
+		return -EINVAL;
+	}
+
+	idx = bitmap_find_next_zero_area(lpg->lut_bitmap, lpg->lut_size,
+					 0, len, 0);
+	if (idx >= lpg->lut_size)
+		return -ENOSPC;
+
+	for (i = 0; i < len; i++) {
+		brightness = pattern[i].brightness;
+		addr = SDAM_LPG_SDAM_LUT_PATTERN_OFFSET + i + idx;
+		rc = nvmem_device_write(lpg->lpg_chan_sdam, addr, 1, &brightness);
+		if (rc < 0)
+			return rc;
+	}
+
+	bitmap_set(lpg->lut_bitmap, idx, len);
+
+	*lo_idx = idx;
+	*hi_idx = idx + len - 1;
+
+	return 0;
+}
+
 static int lpg_lut_store(struct lpg *lpg, struct led_pattern *pattern,
 			 size_t len, unsigned int *lo_idx, unsigned int *hi_idx)
 {
@@ -462,6 +601,28 @@ static void lpg_apply_pwm_value(struct lpg_channel *chan)
 #define LPG_PATTERN_CONFIG_PAUSE_HI	BIT(1)
 #define LPG_PATTERN_CONFIG_PAUSE_LO	BIT(0)
 
+static void lpg_sdam_apply_lut_control(struct lpg_channel *chan)
+{
+	struct nvmem_device *lpg_chan_sdam = chan->lpg->lpg_chan_sdam;
+	unsigned int lo_idx = chan->pattern_lo_idx;
+	unsigned int hi_idx = chan->pattern_hi_idx;
+	u8 val = 0, conf = 0;
+
+	if (!chan->ramp_enabled || chan->pattern_lo_idx == chan->pattern_hi_idx)
+		return;
+
+	if (!chan->ramp_oneshot)
+		conf |= LPG_PATTERN_CONFIG_REPEAT;
+
+	nvmem_device_write(lpg_chan_sdam, SDAM_PBS_SCRATCH_LUT_COUNTER_OFFSET + chan->sdam_offset, 1, &val);
+	nvmem_device_write(lpg_chan_sdam, SDAM_PATTERN_CONFIG_OFFSET + chan->sdam_offset, 1, &conf);
+	nvmem_device_write(lpg_chan_sdam, SDAM_END_INDEX_OFFSET + chan->sdam_offset, 1, &hi_idx);
+	nvmem_device_write(lpg_chan_sdam, SDAM_START_INDEX_OFFSET + chan->sdam_offset, 1, &lo_idx);
+
+	val = RAMP_STEP_DURATION(chan->ramp_tick_ms);
+	nvmem_device_write(lpg_chan_sdam, SDAM_REG_RAMP_STEP_DURATION, 1, &val);
+}
+
 static void lpg_apply_lut_control(struct lpg_channel *chan)
 {
 	struct lpg *lpg = chan->lpg;
@@ -597,7 +758,10 @@ static void lpg_apply(struct lpg_channel *chan)
 	lpg_apply_pwm_value(chan);
 	lpg_apply_control(chan);
 	lpg_apply_sync(chan);
-	lpg_apply_lut_control(chan);
+	if (chan->lpg->lpg_chan_sdam)
+		lpg_sdam_apply_lut_control(chan);
+	else
+		lpg_apply_lut_control(chan);
 	lpg_enable_glitch(chan);
 }
 
@@ -642,6 +806,9 @@ static void lpg_brightness_set(struct lpg_led *led, struct led_classdev *cdev,
 		triled_mask |= chan->triled_mask;
 
 		lpg_apply(chan);
+
+		if (chan->pattern_set)
+			lpg_sdam_configure_triggers(chan, true);
 	}
 
 	/* Toggle triled lines */
@@ -836,18 +1003,24 @@ static int lpg_pattern_set(struct lpg_led *led, struct led_pattern *led_pattern,
 	 * If the specified pattern is a palindrome the ping pong mode is
 	 * enabled. In this scenario the delta_t of the middle entry (i.e. the
 	 * last in the programmed pattern) determines the "high pause".
+	 *
+	 * SDAM devices supporting LUT do not support "low pause", "high pause"
+	 * or "ping pong"
 	 */
 
 	/* Detect palindromes and use "ping pong" to reduce LUT usage */
-	for (i = 0; i < len / 2; i++) {
-		brightness_a = pattern[i].brightness;
-		brightness_b = pattern[len - i - 1].brightness;
-
-		if (brightness_a != brightness_b) {
-			ping_pong = false;
-			break;
+	if (lpg->lut_base) {
+		for (i = 0; i < len / 2; i++) {
+			brightness_a = pattern[i].brightness;
+			brightness_b = pattern[len - i - 1].brightness;
+
+			if (brightness_a != brightness_b) {
+				ping_pong = false;
+				break;
+			}
 		}
-	}
+	} else
+		ping_pong = false;
 
 	/* The pattern length to be written to the LUT */
 	if (ping_pong)
@@ -875,12 +1048,27 @@ static int lpg_pattern_set(struct lpg_led *led, struct led_pattern *led_pattern,
 	if (delta_t >= BIT(9))
 		goto out_free_pattern;
 
-	/* Find "low pause" and "high pause" in the pattern */
-	lo_pause = pattern[0].delta_t;
-	hi_pause = pattern[actual_len - 1].delta_t;
+	/*
+	 * Find "low pause" and "high pause" in the pattern in the LUT case.
+	 * LPGs using SDAM for pattern require equal duration of all steps
+	 */
+	if (lpg->lut_base) {
+		lo_pause = pattern[0].delta_t;
+		hi_pause = pattern[actual_len - 1].delta_t;
+	} else {
+		if (delta_t != pattern[0].delta_t ||
+		    delta_t != pattern[actual_len - 1].delta_t)
+			goto out_free_pattern;
+	}
+
 
 	mutex_lock(&lpg->lock);
-	ret = lpg_lut_store(lpg, pattern, actual_len, &lo_idx, &hi_idx);
+
+	if (lpg->lpg_chan_sdam)
+		ret = lpg_lut_store_sdam(lpg, pattern, actual_len, &lo_idx, &hi_idx);
+	else
+		ret = lpg_lut_store(lpg, pattern, actual_len, &lo_idx, &hi_idx);
+
 	if (ret < 0)
 		goto out_unlock;
 
@@ -896,6 +1084,8 @@ static int lpg_pattern_set(struct lpg_led *led, struct led_pattern *led_pattern,
 
 		chan->pattern_lo_idx = lo_idx;
 		chan->pattern_hi_idx = hi_idx;
+
+		chan->pattern_set = true;
 	}
 
 out_unlock:
@@ -953,6 +1143,7 @@ static int lpg_pattern_clear(struct lpg_led *led)
 
 	for (i = 0; i < led->num_channels; i++) {
 		chan = led->channels[i];
+		lpg_sdam_configure_triggers(chan, false);
 		chan->pattern_lo_idx = 0;
 		chan->pattern_hi_idx = 0;
 	}
@@ -1188,8 +1379,8 @@ static int lpg_add_led(struct lpg *lpg, struct device_node *np)
 		cdev->brightness_set_blocking = lpg_brightness_mc_set;
 		cdev->blink_set = lpg_blink_mc_set;
 
-		/* Register pattern accessors only if we have a LUT block */
-		if (lpg->lut_base) {
+		/* Register pattern accessors if we have a LUT block or when using PPG */
+		if (lpg->lut_base || lpg->lpg_chan_sdam) {
 			cdev->pattern_set = lpg_pattern_mc_set;
 			cdev->pattern_clear = lpg_pattern_mc_clear;
 		}
@@ -1202,15 +1393,19 @@ static int lpg_add_led(struct lpg *lpg, struct device_node *np)
 		cdev->brightness_set_blocking = lpg_brightness_single_set;
 		cdev->blink_set = lpg_blink_single_set;
 
-		/* Register pattern accessors only if we have a LUT block */
-		if (lpg->lut_base) {
+		/* Register pattern accessors if we have a LUT block or when using PPG */
+		if (lpg->lut_base || lpg->lpg_chan_sdam) {
 			cdev->pattern_set = lpg_pattern_single_set;
 			cdev->pattern_clear = lpg_pattern_single_clear;
 		}
 	}
 
 	cdev->default_trigger = of_get_property(np, "linux,default-trigger", NULL);
-	cdev->max_brightness = LPG_RESOLUTION_9BIT - 1;
+
+	if (lpg->lpg_chan_sdam)
+		cdev->max_brightness = PPG_MAX_LED_BRIGHTNESS;
+	else
+		cdev->max_brightness = LPG_RESOLUTION_9BIT - 1;
 
 	if (!of_property_read_string(np, "default-state", &state) &&
 	    !strcmp(state, "on"))
@@ -1251,6 +1446,8 @@ static int lpg_init_channels(struct lpg *lpg)
 		chan->base = data->channels[i].base;
 		chan->triled_mask = data->channels[i].triled_mask;
 		chan->lut_mask = BIT(i);
+		chan->sdam_offset = data->channels[i].sdam_offset;
+		chan->lpg_idx = i;
 
 		regmap_read(lpg->map, chan->base + LPG_SUBTYPE_REG, &chan->subtype);
 	}
@@ -1297,11 +1494,12 @@ static int lpg_init_lut(struct lpg *lpg)
 {
 	const struct lpg_data *data = lpg->data;
 
-	if (!data->lut_base)
+	if (!data->lut_size)
 		return 0;
 
-	lpg->lut_base = data->lut_base;
 	lpg->lut_size = data->lut_size;
+	if (data->lut_base)
+		lpg->lut_base = data->lut_base;
 
 	lpg->lut_bitmap = devm_bitmap_zalloc(lpg->dev, lpg->lut_size, GFP_KERNEL);
 	if (!lpg->lut_bitmap)
@@ -1310,6 +1508,44 @@ static int lpg_init_lut(struct lpg *lpg)
 	return 0;
 }
 
+static int lpg_init_sdam(struct lpg *lpg)
+{
+	struct lpg_channel *chan;
+	int i, sdam_count, rc;
+	u8 val = 0;
+
+	sdam_count = of_property_count_strings(lpg->dev->of_node, "nvmem-names");
+	if (sdam_count <= 0)
+		return 0;
+
+	/* get the SDAM device for LPG/LUT config */
+	lpg->lpg_chan_sdam = devm_nvmem_device_get(lpg->dev, "lpg_chan_sdam");
+	if (IS_ERR(lpg->lpg_chan_sdam))
+		return dev_err_probe(lpg->dev, PTR_ERR(lpg->lpg_chan_sdam),
+				"Failed to get lpg sdam device\n");
+
+	lpg->pbs_dev = get_pbs_client_device(lpg->dev);
+	if (IS_ERR(lpg->pbs_dev))
+		return dev_err_probe(lpg->dev, PTR_ERR(lpg->pbs_dev),
+				"Failed to get PBS client device\n");
+
+	for (i = 0; i < lpg->num_channels; i++) {
+		chan = &lpg->channels[i];
+		if (chan->sdam_offset) {
+			rc = nvmem_device_write(lpg->lpg_chan_sdam,
+				SDAM_PBS_SCRATCH_LUT_COUNTER_OFFSET + chan->sdam_offset, 1, &val);
+			if (rc < 0)
+				return rc;
+
+			rc = lpg_sdam_configure_triggers(chan, false);
+			if (rc < 0)
+				return rc;
+		}
+	}
+
+	return 0;
+}
+
 static int lpg_probe(struct platform_device *pdev)
 {
 	struct device_node *np;
@@ -1346,6 +1582,10 @@ static int lpg_probe(struct platform_device *pdev)
 	if (ret < 0)
 		return ret;
 
+	ret = lpg_init_sdam(lpg);
+	if (ret < 0)
+		return ret;
+
 	ret = lpg_init_lut(lpg);
 	if (ret < 0)
 		return ret;
-- 
2.41.0

Powered by blists - more mailing lists