| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Fri, 29 Sep 2023 10:16:05 +0100
From: Lukasz Luba <lukasz.luba@....com>
To: "Rafael J. Wysocki" <rafael@...nel.org>
Cc: linux-kernel@...r.kernel.org, linux-pm@...r.kernel.org,
dietmar.eggemann@....com, rui.zhang@...el.com,
amit.kucheria@...durent.com, amit.kachhap@...il.com,
daniel.lezcano@...aro.org, viresh.kumar@...aro.org,
len.brown@...el.com, pavel@....cz, mhiramat@...nel.org,
qyousef@...alina.io, wvw@...gle.com
Subject: Re: [PATCH v4 09/18] PM: EM: Introduce runtime modifiable table
On 9/26/23 20:12, Rafael J. Wysocki wrote:
> On Mon, Sep 25, 2023 at 10:11 AM Lukasz Luba <lukasz.luba@....com> wrote:
>>
>> The new runtime table would be populated with a new power data to better
>> reflect the actual power. The power can vary over time e.g. due to the
>> SoC temperature change. Higher temperature can increase power values.
>> For longer running scenarios, such as game or camera, when also other
>> devices are used (e.g. GPU, ISP) the CPU power can change. The new
>> EM framework is able to addresses this issue and change the data
>> at runtime safely.
>>
>> The runtime modifiable EM data is used by the Energy Aware Scheduler (EAS)
>> for the task placement. All the other users (thermal, etc.) are still
>> using the default (basic) EM. This fact drove the design of this feature.
>>
>> Signed-off-by: Lukasz Luba <lukasz.luba@....com>
>> ---
>> include/linux/energy_model.h | 4 +++-
>> kernel/power/energy_model.c | 12 +++++++++++-
>> 2 files changed, 14 insertions(+), 2 deletions(-)
>>
>> diff --git a/include/linux/energy_model.h b/include/linux/energy_model.h
>> index 546dee90f716..740e7c25cfff 100644
>> --- a/include/linux/energy_model.h
>> +++ b/include/linux/energy_model.h
>> @@ -39,7 +39,7 @@ struct em_perf_state {
>> /**
>> * struct em_perf_table - Performance states table
>> * @state: List of performance states, in ascending order
>> - * @rcu: RCU used for safe access and destruction
>> + * @rcu: RCU used only for runtime modifiable table
>
> This still doesn't appear to be used anywhere, so why change it here?
I will try to move this later in the series.
>
>> */
>> struct em_perf_table {
>> struct em_perf_state *state;
>> @@ -49,6 +49,7 @@ struct em_perf_table {
>> /**
>> * struct em_perf_domain - Performance domain
>> * @default_table: Pointer to the default em_perf_table
>> + * @runtime_table: Pointer to the runtime modifiable em_perf_table
>
> "Pointer to em_perf_table that can be dynamically updated"
OK
>
>> * @nr_perf_states: Number of performance states
>> * @flags: See "em_perf_domain flags"
>> * @cpus: Cpumask covering the CPUs of the domain. It's here
>> @@ -64,6 +65,7 @@ struct em_perf_table {
>> */
>> struct em_perf_domain {
>> struct em_perf_table *default_table;
>> + struct em_perf_table __rcu *runtime_table;
>> int nr_perf_states;
>> unsigned long flags;
>> unsigned long cpus[];
>> diff --git a/kernel/power/energy_model.c b/kernel/power/energy_model.c
>> index 797141638b29..5b40db38b745 100644
>> --- a/kernel/power/energy_model.c
>> +++ b/kernel/power/energy_model.c
>> @@ -251,6 +251,9 @@ static int em_create_pd(struct device *dev, int nr_states,
>> return ret;
>> }
>>
>> + /* Initialize runtime table as default table. */
>
> Redundant comment.
I'll drop it.
>
>> + rcu_assign_pointer(pd->runtime_table, default_table);
>> +
>> if (_is_cpu_device(dev))
>> for_each_cpu(cpu, cpus) {
>> cpu_dev = get_cpu_device(cpu);
>> @@ -448,6 +451,7 @@ EXPORT_SYMBOL_GPL(em_dev_register_perf_domain);
>> */
>> void em_dev_unregister_perf_domain(struct device *dev)
>> {
>> + struct em_perf_table __rcu *runtime_table;
>> struct em_perf_domain *pd;
>>
>> if (IS_ERR_OR_NULL(dev) || !dev->em_pd)
>> @@ -457,18 +461,24 @@ void em_dev_unregister_perf_domain(struct device *dev)
>> return;
>>
>> pd = dev->em_pd;
>> -
>
> Unrelated change.
ACK
>
>> /*
>> * The mutex separates all register/unregister requests and protects
>> * from potential clean-up/setup issues in the debugfs directories.
>> * The debugfs directory name is the same as device's name.
>> */
>> mutex_lock(&em_pd_mutex);
>> +
>
> Same here.
ACK
>
>> em_debug_remove_pd(dev);
>>
>> + runtime_table = pd->runtime_table;
>> +
>> + rcu_assign_pointer(pd->runtime_table, NULL);
>> + synchronize_rcu();
>
> Is it really a good idea to call this under a mutex?
This is the unregistration of the EM code path, so a thermal
driver which gets some IRQs might not be aware that the EM
is going to vanish. That's why those two code paths: update
& unregister are protected with the same lock.
This synchronize_rcu() won't be long, but makes sure
that when we free(dev->em_pd) we don't leak runtime_table.
>
>> +
>> kfree(pd->default_table->state);
>> kfree(pd->default_table);
>> kfree(dev->em_pd);
>> +
>
> Unrelated change.
ACK
>
>> dev->em_pd = NULL;
>> mutex_unlock(&em_pd_mutex);
>> }
>> --
>
> So this really adds a pointer to a table that can be dynamically
> updated to struct em_perf_domain without any users so far. It is not
> used anywhere as of this patch AFAICS, which is not what the changelog
> is saying.
Good catch. I will adjust the changlog in header and say:
'Add infrastructure and mechanisms for the new runtime table.
The runtime modifiable EM data is used by the Energy Aware Scheduler
(EAS)for the task placement. All the other users (thermal, etc.) are
still using the default (basic) EM. This fact drove the design of this
feature.'
Powered by blists - more mailing lists