lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20230929141304.3934380-7-msp@baylibre.com>
Date:   Fri, 29 Sep 2023 16:12:56 +0200
From:   Markus Schneider-Pargmann <msp@...libre.com>
To:     Marc Kleine-Budde <mkl@...gutronix.de>,
        Chandrasekar Ramakrishnan <rcsekar@...sung.com>,
        Wolfgang Grandegger <wg@...ndegger.com>
Cc:     Vincent MAILHOL <mailhol.vincent@...adoo.fr>,
        Simon Horman <simon.horman@...igine.com>,
        "David S . Miller" <davem@...emloft.net>,
        Eric Dumazet <edumazet@...gle.com>,
        Jakub Kicinski <kuba@...nel.org>,
        Paolo Abeni <pabeni@...hat.com>, linux-can@...r.kernel.org,
        netdev@...r.kernel.org, linux-kernel@...r.kernel.org,
        Julien Panis <jpanis@...libre.com>, Judith Mendez <jm@...com>,
        Markus Schneider-Pargmann <msp@...libre.com>
Subject: [PATCH v6 06/14] can: m_can: Add rx coalescing ethtool support

Add the possibility to set coalescing parameters with ethtool.

rx-frames-irq and rx-usecs-irq can only be set and unset together as the
implemented mechanism would not work otherwise. rx-frames-irq can't be
greater than the RX FIFO size.

Also all values can only be changed if the chip is not active.

Polling is excluded from irq coalescing support.

Signed-off-by: Markus Schneider-Pargmann <msp@...libre.com>
---
 drivers/net/can/m_can/m_can.c | 55 ++++++++++++++++++++++++++++++++++-
 1 file changed, 54 insertions(+), 1 deletion(-)

diff --git a/drivers/net/can/m_can/m_can.c b/drivers/net/can/m_can/m_can.c
index b20edd64bb7e..546193ab6e0d 100644
--- a/drivers/net/can/m_can/m_can.c
+++ b/drivers/net/can/m_can/m_can.c
@@ -1976,7 +1976,57 @@ static const struct net_device_ops m_can_netdev_ops = {
 	.ndo_change_mtu = can_change_mtu,
 };
 
+static int m_can_get_coalesce(struct net_device *dev,
+			      struct ethtool_coalesce *ec,
+			      struct kernel_ethtool_coalesce *kec,
+			      struct netlink_ext_ack *ext_ack)
+{
+	struct m_can_classdev *cdev = netdev_priv(dev);
+
+	ec->rx_max_coalesced_frames_irq = cdev->rx_max_coalesced_frames_irq;
+	ec->rx_coalesce_usecs_irq = cdev->rx_coalesce_usecs_irq;
+
+	return 0;
+}
+
+static int m_can_set_coalesce(struct net_device *dev,
+			      struct ethtool_coalesce *ec,
+			      struct kernel_ethtool_coalesce *kec,
+			      struct netlink_ext_ack *ext_ack)
+{
+	struct m_can_classdev *cdev = netdev_priv(dev);
+
+	if (cdev->can.state != CAN_STATE_STOPPED) {
+		netdev_err(dev, "Device is in use, please shut it down first\n");
+		return -EBUSY;
+	}
+
+	if (ec->rx_max_coalesced_frames_irq > cdev->mcfg[MRAM_RXF0].num) {
+		netdev_err(dev, "rx-frames-irq %u greater than the RX FIFO %u\n",
+			   ec->rx_max_coalesced_frames_irq,
+			   cdev->mcfg[MRAM_RXF0].num);
+		return -EINVAL;
+	}
+	if ((ec->rx_max_coalesced_frames_irq == 0) != (ec->rx_coalesce_usecs_irq == 0)) {
+		netdev_err(dev, "rx-frames-irq and rx-usecs-irq can only be set together\n");
+		return -EINVAL;
+	}
+
+	cdev->rx_max_coalesced_frames_irq = ec->rx_max_coalesced_frames_irq;
+	cdev->rx_coalesce_usecs_irq = ec->rx_coalesce_usecs_irq;
+
+	return 0;
+}
+
 static const struct ethtool_ops m_can_ethtool_ops = {
+	.supported_coalesce_params = ETHTOOL_COALESCE_RX_USECS_IRQ |
+		ETHTOOL_COALESCE_RX_MAX_FRAMES_IRQ,
+	.get_ts_info = ethtool_op_get_ts_info,
+	.get_coalesce = m_can_get_coalesce,
+	.set_coalesce = m_can_set_coalesce,
+};
+
+static const struct ethtool_ops m_can_ethtool_ops_polling = {
 	.get_ts_info = ethtool_op_get_ts_info,
 };
 
@@ -1984,7 +2034,10 @@ static int register_m_can_dev(struct net_device *dev)
 {
 	dev->flags |= IFF_ECHO;	/* we support local echo */
 	dev->netdev_ops = &m_can_netdev_ops;
-	dev->ethtool_ops = &m_can_ethtool_ops;
+	if (dev->irq)
+		dev->ethtool_ops = &m_can_ethtool_ops;
+	else
+		dev->ethtool_ops = &m_can_ethtool_ops_polling;
 
 	return register_candev(dev);
 }
-- 
2.40.1

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ