lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite for Android: free password hash cracker in your pocket
[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <ZRcCJbbyW+g4yjgs@p14s>
Date:   Fri, 29 Sep 2023 10:58:13 -0600
From:   Mathieu Poirier <mathieu.poirier@...aro.org>
To:     Tanmay Shah <tanmay.shah@....com>
Cc:     andersson@...nel.org, linux-remoteproc@...r.kernel.org,
        linux-kernel@...r.kernel.org
Subject: Re: [PATCH] remoteproc: zynqmp: change tcm address translation method

On Mon, Sep 25, 2023 at 10:26:48AM -0700, Tanmay Shah wrote:
> Introduce device address in hardcode TCM table.
> Device address is used for address translation.
> Also, previous method(hack) to mask few bits from address
> to achieve address translation is removed
> 
> Signed-off-by: Tanmay Shah <tanmay.shah@....com>
> ---
>  drivers/remoteproc/xlnx_r5_remoteproc.c | 58 +++++++++----------------
>  1 file changed, 20 insertions(+), 38 deletions(-)
>

Applied.

Thanks,
Mathieu

> diff --git a/drivers/remoteproc/xlnx_r5_remoteproc.c b/drivers/remoteproc/xlnx_r5_remoteproc.c
> index efd758c2f4ed..4395edea9a64 100644
> --- a/drivers/remoteproc/xlnx_r5_remoteproc.c
> +++ b/drivers/remoteproc/xlnx_r5_remoteproc.c
> @@ -39,12 +39,14 @@ enum zynqmp_r5_cluster_mode {
>   * struct mem_bank_data - Memory Bank description
>   *
>   * @addr: Start address of memory bank
> + * @da: device address
>   * @size: Size of Memory bank
>   * @pm_domain_id: Power-domains id of memory bank for firmware to turn on/off
>   * @bank_name: name of the bank for remoteproc framework
>   */
>  struct mem_bank_data {
>  	phys_addr_t addr;
> +	u32 da;
>  	size_t size;
>  	u32 pm_domain_id;
>  	char *bank_name;
> @@ -76,18 +78,18 @@ struct mbox_info {
>   * accepted for system-dt specifications and upstreamed in linux kernel
>   */
>  static const struct mem_bank_data zynqmp_tcm_banks_split[] = {
> -	{0xffe00000UL, 0x10000UL, PD_R5_0_ATCM, "atcm0"}, /* TCM 64KB each */
> -	{0xffe20000UL, 0x10000UL, PD_R5_0_BTCM, "btcm0"},
> -	{0xffe90000UL, 0x10000UL, PD_R5_1_ATCM, "atcm1"},
> -	{0xffeb0000UL, 0x10000UL, PD_R5_1_BTCM, "btcm1"},
> +	{0xffe00000UL, 0x0, 0x10000UL, PD_R5_0_ATCM, "atcm0"}, /* TCM 64KB each */
> +	{0xffe20000UL, 0x20000, 0x10000UL, PD_R5_0_BTCM, "btcm0"},
> +	{0xffe90000UL, 0x0, 0x10000UL, PD_R5_1_ATCM, "atcm1"},
> +	{0xffeb0000UL, 0x20000, 0x10000UL, PD_R5_1_BTCM, "btcm1"},
>  };
>  
>  /* In lockstep mode cluster combines each 64KB TCM and makes 128KB TCM */
>  static const struct mem_bank_data zynqmp_tcm_banks_lockstep[] = {
> -	{0xffe00000UL, 0x20000UL, PD_R5_0_ATCM, "atcm0"}, /* TCM 128KB each */
> -	{0xffe20000UL, 0x20000UL, PD_R5_0_BTCM, "btcm0"},
> -	{0, 0, PD_R5_1_ATCM, ""},
> -	{0, 0, PD_R5_1_BTCM, ""},
> +	{0xffe00000UL, 0x0, 0x20000UL, PD_R5_0_ATCM, "atcm0"}, /* TCM 128KB each */
> +	{0xffe20000UL, 0x20000, 0x20000UL, PD_R5_0_BTCM, "btcm0"},
> +	{0, 0, 0, PD_R5_1_ATCM, ""},
> +	{0, 0, 0, PD_R5_1_BTCM, ""},
>  };
>  
>  /**
> @@ -534,30 +536,6 @@ static int tcm_mem_map(struct rproc *rproc,
>  	/* clear TCMs */
>  	memset_io(va, 0, mem->len);
>  
> -	/*
> -	 * The R5s expect their TCM banks to be at address 0x0 and 0x2000,
> -	 * while on the Linux side they are at 0xffexxxxx.
> -	 *
> -	 * Zero out the high 12 bits of the address. This will give
> -	 * expected values for TCM Banks 0A and 0B (0x0 and 0x20000).
> -	 */
> -	mem->da &= 0x000fffff;
> -
> -	/*
> -	 * TCM Banks 1A and 1B still have to be translated.
> -	 *
> -	 * Below handle these two banks' absolute addresses (0xffe90000 and
> -	 * 0xffeb0000) and convert to the expected relative addresses
> -	 * (0x0 and 0x20000).
> -	 */
> -	if (mem->da == 0x90000 || mem->da == 0xB0000)
> -		mem->da -= 0x90000;
> -
> -	/* if translated TCM bank address is not valid report error */
> -	if (mem->da != 0x0 && mem->da != 0x20000) {
> -		dev_err(&rproc->dev, "invalid TCM address: %x\n", mem->da);
> -		return -EINVAL;
> -	}
>  	return 0;
>  }
>  
> @@ -579,6 +557,7 @@ static int add_tcm_carveout_split_mode(struct rproc *rproc)
>  	u32 pm_domain_id;
>  	size_t bank_size;
>  	char *bank_name;
> +	u32 da;
>  
>  	r5_core = rproc->priv;
>  	dev = r5_core->dev;
> @@ -591,6 +570,7 @@ static int add_tcm_carveout_split_mode(struct rproc *rproc)
>  	 */
>  	for (i = 0; i < num_banks; i++) {
>  		bank_addr = r5_core->tcm_banks[i]->addr;
> +		da = r5_core->tcm_banks[i]->da;
>  		bank_name = r5_core->tcm_banks[i]->bank_name;
>  		bank_size = r5_core->tcm_banks[i]->size;
>  		pm_domain_id = r5_core->tcm_banks[i]->pm_domain_id;
> @@ -603,11 +583,11 @@ static int add_tcm_carveout_split_mode(struct rproc *rproc)
>  			goto release_tcm_split;
>  		}
>  
> -		dev_dbg(dev, "TCM carveout split mode %s addr=%llx, size=0x%lx",
> -			bank_name, bank_addr, bank_size);
> +		dev_dbg(dev, "TCM carveout split mode %s addr=%llx, da=0x%x, size=0x%lx",
> +			bank_name, bank_addr, da, bank_size);
>  
>  		rproc_mem = rproc_mem_entry_init(dev, NULL, bank_addr,
> -						 bank_size, bank_addr,
> +						 bank_size, da,
>  						 tcm_mem_map, tcm_mem_unmap,
>  						 bank_name);
>  		if (!rproc_mem) {
> @@ -648,6 +628,7 @@ static int add_tcm_carveout_lockstep_mode(struct rproc *rproc)
>  	struct device *dev;
>  	u32 pm_domain_id;
>  	char *bank_name;
> +	u32 da;
>  
>  	r5_core = rproc->priv;
>  	dev = r5_core->dev;
> @@ -679,11 +660,12 @@ static int add_tcm_carveout_lockstep_mode(struct rproc *rproc)
>  			continue;
>  
>  		bank_addr = r5_core->tcm_banks[i]->addr;
> +		da = r5_core->tcm_banks[i]->da;
>  		bank_name = r5_core->tcm_banks[i]->bank_name;
>  
>  		/* Register TCM address range, TCM map and unmap functions */
>  		rproc_mem = rproc_mem_entry_init(dev, NULL, bank_addr,
> -						 bank_size, bank_addr,
> +						 bank_size, da,
>  						 tcm_mem_map, tcm_mem_unmap,
>  						 bank_name);
>  		if (!rproc_mem) {
> @@ -695,8 +677,8 @@ static int add_tcm_carveout_lockstep_mode(struct rproc *rproc)
>  		/* If registration is success, add carveouts */
>  		rproc_add_carveout(rproc, rproc_mem);
>  
> -		dev_dbg(dev, "TCM add carveout lockstep mode %s addr=0x%llx, size=0x%lx",
> -			bank_name, bank_addr, bank_size);
> +		dev_dbg(dev, "TCM carveout lockstep mode %s addr=0x%llx, da=0x%x, size=0x%lx",
> +			bank_name, bank_addr, da, bank_size);
>  	}
>  
>  	return 0;
> 
> base-commit: 1a93ced18d7b81be39beba26b1c168ef21c8d0ad
> -- 
> 2.25.1
> 

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ