[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20230929-ad2s1210-mainline-v3-23-fa4364281745@baylibre.com>
Date: Fri, 29 Sep 2023 12:23:28 -0500
From: David Lechner <dlechner@...libre.com>
To: linux-iio@...r.kernel.org, devicetree@...r.kernel.org,
linux-staging@...ts.linux.dev
Cc: David Lechner <david@...hnology.com>,
Jonathan Cameron <jic23@...nel.org>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Conor Dooley <conor+dt@...nel.org>,
Michael Hennerich <Michael.Hennerich@...log.com>,
Nuno Sá <nuno.sa@...log.com>,
Axel Haslam <ahaslam@...libre.com>,
Philip Molloy <pmolloy@...libre.com>,
linux-kernel@...r.kernel.org, David Lechner <dlechner@...libre.com>
Subject: [PATCH v3 23/27] staging: iio: resolver: ad2s1210: convert DOS overrange threshold to event attr
From: David Lechner <david@...hnology.com>
From: David Lechner <dlechner@...libre.com>
The AD2S1210 has a programmable threshold for the degradation of signal
(DOS) overrange fault. This fault is triggered when either the sine or
cosine input rises the threshold voltage.
This patch converts the custom device DOS overrange threshold attribute
to an event rising edge threshold attribute on the monitor signal
channel.
The attribute now uses millivolts instead of the raw register value in
accordance with the IIO ABI.
Emitting the event will be implemented in a later patch.
Signed-off-by: David Lechner <dlechner@...libre.com>
---
v3 changes: This is a new patch in v3
drivers/staging/iio/resolver/ad2s1210.c | 19 +++++++++++++++----
1 file changed, 15 insertions(+), 4 deletions(-)
diff --git a/drivers/staging/iio/resolver/ad2s1210.c b/drivers/staging/iio/resolver/ad2s1210.c
index 7abbc184c351..66def9f1dd1b 100644
--- a/drivers/staging/iio/resolver/ad2s1210.c
+++ b/drivers/staging/iio/resolver/ad2s1210.c
@@ -743,9 +743,6 @@ static int ad2s1210_write_raw(struct iio_dev *indio_dev,
static IIO_DEVICE_ATTR(fault, 0644,
ad2s1210_show_fault, ad2s1210_clear_fault, 0);
-static IIO_DEVICE_ATTR(dos_ovr_thrd, 0644,
- ad2s1210_show_reg, ad2s1210_store_reg,
- AD2S1210_REG_DOS_OVR_THRD);
static IIO_DEVICE_ATTR(dos_mis_thrd, 0644,
ad2s1210_show_reg, ad2s1210_store_reg,
AD2S1210_REG_DOS_MIS_THRD);
@@ -787,6 +784,13 @@ static const struct iio_event_spec ad2s1210_monitor_signal_event_spec[] = {
/* Loss of signal threshold. */
.mask_separate = BIT(IIO_EV_INFO_VALUE),
},
+ {
+ /* Sine/cosine DOS overrange fault.*/
+ .type = IIO_EV_TYPE_THRESH,
+ .dir = IIO_EV_DIR_RISING,
+ /* Degredation of signal overrange threshold. */
+ .mask_separate = BIT(IIO_EV_INFO_VALUE),
+ },
};
static const struct iio_chan_spec ad2s1210_channels[] = {
@@ -860,7 +864,6 @@ static const struct iio_chan_spec ad2s1210_channels[] = {
static struct attribute *ad2s1210_attributes[] = {
&iio_dev_attr_fault.dev_attr.attr,
- &iio_dev_attr_dos_ovr_thrd.dev_attr.attr,
&iio_dev_attr_dos_mis_thrd.dev_attr.attr,
&iio_dev_attr_dos_rst_max_thrd.dev_attr.attr,
&iio_dev_attr_dos_rst_min_thrd.dev_attr.attr,
@@ -899,12 +902,14 @@ IIO_CONST_ATTR(in_phase0_mag_value_available,
__stringify(PHASE_360_DEG_TO_RAD_INT) "."
__stringify(PHASE_360_DEG_TO_RAD_MICRO));
IIO_CONST_ATTR(in_altvoltage0_thresh_falling_value_available, THRESHOLD_RANGE_STR);
+IIO_CONST_ATTR(in_altvoltage0_thresh_rising_value_available, THRESHOLD_RANGE_STR);
IIO_DEVICE_ATTR_RO(in_angl1_thresh_rising_value_available, 0);
IIO_DEVICE_ATTR_RO(in_angl1_thresh_rising_hysteresis_available, 0);
static struct attribute *ad2s1210_event_attributes[] = {
&iio_const_attr_in_phase0_mag_value_available.dev_attr.attr,
&iio_const_attr_in_altvoltage0_thresh_falling_value_available.dev_attr.attr,
+ &iio_const_attr_in_altvoltage0_thresh_rising_value_available.dev_attr.attr,
&iio_dev_attr_in_angl1_thresh_rising_value_available.dev_attr.attr,
&iio_dev_attr_in_angl1_thresh_rising_hysteresis_available.dev_attr.attr,
NULL,
@@ -963,6 +968,9 @@ static int ad2s1210_read_event_value(struct iio_dev *indio_dev,
if (type == IIO_EV_TYPE_THRESH && dir == IIO_EV_DIR_FALLING)
return ad2s1210_get_voltage_threshold(st,
AD2S1210_REG_LOS_THRD, val);
+ if (type == IIO_EV_TYPE_THRESH && dir == IIO_EV_DIR_RISING)
+ return ad2s1210_get_voltage_threshold(st,
+ AD2S1210_REG_DOS_OVR_THRD, val);
return -EINVAL;
case IIO_PHASE:
return ad2s1210_get_phase_lock_range(st, val, val2);
@@ -996,6 +1004,9 @@ static int ad2s1210_write_event_value(struct iio_dev *indio_dev,
if (type == IIO_EV_TYPE_THRESH && dir == IIO_EV_DIR_FALLING)
return ad2s1210_set_voltage_threshold(st,
AD2S1210_REG_LOS_THRD, val);
+ if (type == IIO_EV_TYPE_THRESH && dir == IIO_EV_DIR_RISING)
+ return ad2s1210_set_voltage_threshold(st,
+ AD2S1210_REG_DOS_OVR_THRD, val);
return -EINVAL;
case IIO_PHASE:
return ad2s1210_set_phase_lock_range(st, val, val2);
--
2.42.0
Powered by blists - more mailing lists