[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20230930175039.2d311d6b@jic23-huawei>
Date: Sat, 30 Sep 2023 17:50:39 +0100
From: Jonathan Cameron <jic23@...nel.org>
To: Jean-Baptiste Maneyrol <Jean-Baptiste.Maneyrol@....com>
Cc: Andreas Kemnade <andreas@...nade.info>,
"lars@...afoo.de" <lars@...afoo.de>,
"robh+dt@...nel.org" <robh+dt@...nel.org>,
"krzysztof.kozlowski+dt@...aro.org"
<krzysztof.kozlowski+dt@...aro.org>,
"conor+dt@...nel.org" <conor+dt@...nel.org>,
"bcousson@...libre.com" <bcousson@...libre.com>,
"tony@...mide.com" <tony@...mide.com>,
"chenhuiz@...s.com" <chenhuiz@...s.com>,
"andy.shevchenko@...il.com" <andy.shevchenko@...il.com>,
"linux-iio@...r.kernel.org" <linux-iio@...r.kernel.org>,
"devicetree@...r.kernel.org" <devicetree@...r.kernel.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
"linux-omap@...r.kernel.org" <linux-omap@...r.kernel.org>
Subject: Re: [PATCH v3 2/3] iio: imu: mpu6050: add level shifter flag
On Wed, 27 Sep 2023 19:08:31 +0000
Jean-Baptiste Maneyrol <Jean-Baptiste.Maneyrol@....com> wrote:
> Hello,
>
> looks good for me.
>
> Acked-by: Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@....com>
Applied patches 1 and 2 to the togreg branch of iio.git which I will
initially push out as testing to let 0-day poke at it,
Thanks,
Jonathan
>
> Thanks,
> JB
>
>
> From: Andreas Kemnade <andreas@...nade.info>
> Sent: Wednesday, September 27, 2023 19:32
> To: jic23@...nel.org <jic23@...nel.org>; lars@...afoo.de <lars@...afoo.de>; robh+dt@...nel.org <robh+dt@...nel.org>; krzysztof.kozlowski+dt@...aro.org <krzysztof.kozlowski+dt@...aro.org>; conor+dt@...nel.org <conor+dt@...nel.org>; bcousson@...libre.com <bcousson@...libre.com>; tony@...mide.com <tony@...mide.com>; andreas@...nade.info <andreas@...nade.info>; chenhuiz@...s.com <chenhuiz@...s.com>; Jean-Baptiste Maneyrol <Jean-Baptiste.Maneyrol@....com>; andy.shevchenko@...il.com <andy.shevchenko@...il.com>; linux-iio@...r.kernel.org <linux-iio@...r.kernel.org>; devicetree@...r.kernel.org <devicetree@...r.kernel.org>; linux-kernel@...r.kernel.org <linux-kernel@...r.kernel.org>; linux-omap@...r.kernel.org <linux-omap@...r.kernel.org>
> Subject: [PATCH v3 2/3] iio: imu: mpu6050: add level shifter flag
>
> Some boards fail in magnetometer probe if level shifter flag is not set, definition was found in the vendor Linux kernel v3. 0. Signed-off-by: Andreas Kemnade <andreas@ kemnade. info> Reviewed-by: Andy Shevchenko <andy. shevchenko@ gmail. com>
> ZjQcmQRYFpfptBannerStart
> This Message Is From an External Sender
> This message came from outside your organization.
>
> ZjQcmQRYFpfptBannerEnd
> Some boards fail in magnetometer probe if level shifter flag is not set,
> definition was found in the vendor Linux kernel v3.0.
>
> Signed-off-by: Andreas Kemnade <andreas@...nade.info>
> Reviewed-by: Andy Shevchenko <andy.shevchenko@...il.com>
> ---
> drivers/iio/imu/inv_mpu6050/inv_mpu_aux.c | 13 +++++++++++++
> drivers/iio/imu/inv_mpu6050/inv_mpu_core.c | 3 +++
> drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h | 1 +
> 3 files changed, 17 insertions(+)
>
> diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_aux.c b/drivers/iio/imu/inv_mpu6050/inv_mpu_aux.c
> index 7327e5723f961..8a7f2911905af 100644
> --- a/drivers/iio/imu/inv_mpu6050/inv_mpu_aux.c
> +++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_aux.c
> @@ -71,6 +71,19 @@ int inv_mpu_aux_init(const struct inv_mpu6050_state *st)
> unsigned int val;
> int ret;
>
> + /*
> + * Code based on the vendor Linux kernel v3.0,
> + * the exact meaning is unknown.
> + */
> + if (st->chip_type == INV_MPU9150) {
> + unsigned int mask = BIT(7);
> +
> + val = st->level_shifter ? mask : 0;
> + ret = regmap_update_bits(st->map, 0x1, mask, val);
> + if (ret)
> + return ret;
> + }
> +
> /* configure i2c master */
> val = INV_MPU6050_BITS_I2C_MST_CLK_400KHZ |
> INV_MPU6050_BIT_WAIT_FOR_ES;
> diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c b/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c
> index 29f906c884bd8..3fbeef1a70186 100644
> --- a/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c
> +++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c
> @@ -17,6 +17,7 @@
> #include <linux/regulator/consumer.h>
> #include <linux/pm.h>
> #include <linux/pm_runtime.h>
> +#include <linux/property.h>
>
> #include <linux/iio/common/inv_sensors_timestamp.h>
> #include <linux/iio/iio.h>
> @@ -1495,6 +1496,8 @@ int inv_mpu_core_probe(struct regmap *regmap, int irq, const char *name,
> st->irq = irq;
> st->map = regmap;
>
> + st->level_shifter = device_property_read_bool(dev,
> + "invensense,level-shifter");
> pdata = dev_get_platdata(dev);
> if (!pdata) {
> result = iio_read_mount_matrix(dev, &st->orientation);
> diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h b/drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h
> index ed5a96e78df05..7eba1439c8093 100644
> --- a/drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h
> +++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h
> @@ -203,6 +203,7 @@ struct inv_mpu6050_state {
> s32 magn_raw_to_gauss[3];
> struct iio_mount_matrix magn_orient;
> unsigned int suspended_sensors;
> + bool level_shifter;
> u8 *data;
> };
>
Powered by blists - more mailing lists