[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <446f4c92-ca04-d325-4a5f-140b9bcdbd19@quicinc.com>
Date: Sat, 30 Sep 2023 22:43:02 +0530
From: Devi Priya <quic_devipriy@...cinc.com>
To: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>,
<thierry.reding@...il.com>, <robh+dt@...nel.org>,
<krzysztof.kozlowski+dt@...aro.org>, <conor+dt@...nel.org>,
<agross@...nel.org>, <andersson@...nel.org>,
<konrad.dybcio@...aro.org>, <ndesaulniers@...gle.com>,
<trix@...hat.com>, <baruch@...s.co.il>,
<devicetree@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
<linux-arm-msm@...r.kernel.org>, <llvm@...ts.linux.dev>
CC: <linux-pwm@...r.kernel.org>, <u.kleine-koenig@...gutronix.de>,
<nathan@...nel.org>
Subject: Re: [PATCH V12 3/3] arm64: dts: ipq6018: add pwm node
On 9/30/2023 9:05 PM, Krzysztof Kozlowski wrote:
> On 29/09/2023 13:47, Devi Priya wrote:
>>
>>
>> On 9/25/2023 12:29 PM, Devi Priya wrote:
>>> Describe the PWM block on IPQ6018.
>>>
>>> The PWM is in the TCSR area. Make &tcsr "simple-mfd" compatible, and add
>>> &pwm as child of &tcsr.
>>>
>>> Add also ipq6018 specific compatible string.
>>>
>>> Co-developed-by: Baruch Siach <baruch.siach@...lu.com>
>>> Signed-off-by: Baruch Siach <baruch.siach@...lu.com>
>>> Signed-off-by: Devi Priya <quic_devipriy@...cinc.com>
>>> ---
>>> v12:
>>>
>>> No change
>>>
>>> v11:
>>>
>>> No change
>>>
>>> v10:
>>>
>>> No change
>>>
>>> v9:
>>>
>>> Add 'ranges' property (Rob)
>>>
>>> v8:
>>>
>>> Add size cell to 'reg' (Rob)
>>>
>>> v7:
>>>
>>> Use 'reg' instead of 'offset' (Rob)
>>>
>>> Add qcom,tcsr-ipq6018 (Rob)
>>>
>>> Drop clock-names (Bjorn)
>>>
>>> v6:
>>>
>>> Make the PWM node child of TCSR (Rob Herring)
>>>
>>> Add assigned-clocks/assigned-clock-rates (Uwe Kleine-König)
>>>
>>> v5: Use qcom,pwm-regs for TCSR phandle instead of direct regs
>>>
>>> v3: s/qcom,pwm-ipq6018/qcom,ipq6018-pwm/ (Rob Herring)
>>>
>>> arch/arm64/boot/dts/qcom/ipq6018.dtsi | 15 ++++++++++++++-
>>> 1 file changed, 14 insertions(+), 1 deletion(-)
>>>
>>> diff --git a/arch/arm64/boot/dts/qcom/ipq6018.dtsi b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
>>> index 47b8b1d6730a..cadd2c583526 100644
>>> --- a/arch/arm64/boot/dts/qcom/ipq6018.dtsi
>>> +++ b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
>>> @@ -398,8 +398,21 @@ tcsr_mutex: hwlock@...5000 {
>>> };
>>>
>>> tcsr: syscon@...7000 {
>>> - compatible = "qcom,tcsr-ipq6018", "syscon";
>>> + compatible = "qcom,tcsr-ipq6018", "syscon", "simple-mfd";
>>> reg = <0x0 0x01937000 0x0 0x21000>;
>>> + #address-cells = <1>;
>>> + #size-cells = <1>;
>>> + ranges = <0x0 0x0 0x01937000 0x21000>;
>>> +
>> Hi Krzysztof,
>> Referring to
>> https://lore.kernel.org/all/20220909091056.128949-1-krzysztof.kozlowski@linaro.org/,
>> it seems that the TCSR block should
>> not have any child nodes. Could you pls provide your suggestions on pwm
>> being added as the child node?
>
> If you are sure that TCSR contains PWM and all registers are there, then
> feel free to add proper binding. Sending untested patch is not the way
> to go.
Sure, okay
Thanks,
Devi Priya
>
> Best regards,
> Krzysztof
>
Powered by blists - more mailing lists