[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20231001-pxa-gpio-v4-0-0f3b975e6ed5@skole.hr>
Date: Sun, 01 Oct 2023 16:12:51 +0200
From: Duje Mihanović <duje.mihanovic@...le.hr>
To: Daniel Mack <daniel@...que.org>,
Haojian Zhuang <haojian.zhuang@...il.com>,
Robert Jarzmik <robert.jarzmik@...e.fr>,
Russell King <linux@...linux.org.uk>,
Alan Stern <stern@...land.harvard.edu>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
Linus Walleij <linus.walleij@...aro.org>,
Bartosz Golaszewski <brgl@...ev.pl>,
Andy Shevchenko <andy@...nel.org>,
Dmitry Torokhov <dmitry.torokhov@...il.com>,
Mark Brown <broonie@...nel.org>
Cc: linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
linux-usb@...r.kernel.org, linux-gpio@...r.kernel.org,
linux-input@...r.kernel.org, linux-spi@...r.kernel.org,
Duje Mihanović <duje.mihanovic@...le.hr>
Subject: [PATCH RFC v4 0/6] ARM: pxa: GPIO descriptor conversions
Hello,
Small series to convert some of the board files in the mach-pxa directory
to use the new GPIO descriptor interface.
Most notably, the am200epd, am300epd and Spitz matrix keypad among
others are not converted in this series.
Signed-off-by: Duje Mihanović <duje.mihanovic@...le.hr>
---
Changes in v4:
- Address maintainer comments:
- Move wait_for_sync() from spitz.c to driver
- Register LED platform device before getting its gpiod-s
- Add Linus' Reviewed-by
- Link to v3: https://lore.kernel.org/r/20230929-pxa-gpio-v3-0-af8d5e5d1f34@skole.hr
Changes in v3:
- Address maintainer comments:
- Use GPIO_LOOKUP_IDX for LEDs
- Drop unnecessary NULL assignments
- Don't give up on *all* SPI devices if hsync cannot be set up
- Add Linus' Acked-by
- Link to v2: https://lore.kernel.org/r/20230926-pxa-gpio-v2-0-984464d165dd@skole.hr
Changes in v2:
- Address maintainer comments:
- Change mentions of function to function()
- Drop cast in OHCI driver dev_warn() call
- Use %pe in OHCI and reset drivers
- Use GPIO _optional() API in OHCI driver
- Drop unnecessary not-null check in OHCI driver
- Use pr_err() instead of printk() in reset driver
- Rebase on v6.6-rc3
- Link to v1: https://lore.kernel.org/r/20230924-pxa-gpio-v1-0-2805b87d8894@skole.hr
---
Duje Mihanović (6):
ARM: pxa: Convert Spitz OHCI to GPIO descriptors
ARM: pxa: Convert Spitz LEDs to GPIO descriptors
ARM: pxa: Convert Spitz CF power control to GPIO descriptors
ARM: pxa: Convert reset driver to GPIO descriptors
ARM: pxa: Convert gumstix Bluetooth to GPIO descriptors
input: ads7846: Move wait_for_sync() logic to driver
arch/arm/mach-pxa/gumstix.c | 24 +++++++------
arch/arm/mach-pxa/reset.c | 39 +++++++--------------
arch/arm/mach-pxa/reset.h | 3 +-
arch/arm/mach-pxa/spitz.c | 69 +++++++++++++++++++++++++------------
drivers/input/touchscreen/ads7846.c | 22 ++++++++----
drivers/usb/host/ohci-pxa27x.c | 7 ++++
include/linux/spi/ads7846.h | 1 -
7 files changed, 96 insertions(+), 69 deletions(-)
---
base-commit: 6465e260f48790807eef06b583b38ca9789b6072
change-id: 20230807-pxa-gpio-3ce25d574814
Best regards,
--
Duje Mihanović <duje.mihanovic@...le.hr>
Powered by blists - more mailing lists