Message-Id: <20231001081134.37101-1-alkuor@gmail.com>
Date:   Sun,  1 Oct 2023 04:11:20 -0400
From:   Abdel Alkuor <alkuor@...il.com>
To:     heikki.krogerus@...ux.intel.com, krzysztof.kozlowski+dt@...aro.org,
        bryan.odonoghue@...aro.org
Cc:     gregkh@...uxfoundation.org, linux-usb@...r.kernel.org,
        linux-kernel@...r.kernel.org, ryan.eleceng@...il.com,
        robh+dt@...nel.org, conor+dt@...nel.org,
        devicetree@...r.kernel.org, Abdel Alkuor <alkuor@...il.com>
Subject: [PATCH v9 00/14] Add TPS25750 USB type-C PD controller support

TPS25750 USB type-C PD controller has the same register offsets as
tps6598x. The following is a summary of incorporating TPS25750 into
TPS6598x driver:

- Only Check VID register (0x00) for TPS6598x and cd321x, as TPS25750 doesn't
  have VID register.

- TypeC port registration will be registered differently for each PD
  controller. TPS6598x uses system configuration register (0x28) to get
  pr/dr capabilities. On the other hand, TPS25750 will use data role property
  and PD status register (0x40) to get pr/dr capabilities as TPS25750 doesn't
  have register 0x28 supported.

- TPS25750 requires writing a binary configuration to switch PD
  controller from PTCH mode to APP mode which needs the following changes:
  - Add PTCH mode to the modes list.
  - Add an argument to tps6598x_check_mode to return the current mode.
  - Currently, tps6598x_exec_cmd has cmd timeout hardcoded to 1 second,
    and doesn't wait before checking DATA_OUT response. In TPS25750, patch 4CCs
    take longer than 1 second to execute and some requires a delay before
    checking DATA_OUT. To accommodate that, cmd_timeout and response_delay will
    be added as arguments to tps6598x_exec_cmd.
  - Implement applying patch sequence for TPS25750.

- In pm suspend callback, patch mode needs to be checked and the binary
  configuration should be applied if needed.

- For interrupt, TPS25750 has only one event register (0x14) and one mask
  register (0x16) of 11 bytes each, where TPS6598x has two event
  and two mask registers of 8 bytes each. Both TPS25750 and TPS65986x
  shares the same bit field offsets for events/masks/clear but many of
  there fields are reserved in TPS25750, the following needs to be done in
  tps6598x_interrupt:
  - Read EVENT1 register as a block of 11 bytes when tps25750 is present
  - Write CLEAR1 register as a block of 11 bytes when tps25750 is present
  - Add trace_tps25750_irq
  - During testing, I noticed that when a cable is plugged into the PD
    controller and before PD controller switches to APP mode, there is a
    lag between dr/pr updates and PlugInsertOrRemoval Event, so a check
    for dr/pr change needs to be added along TPS_REG_INT_PLUG_EVENT check

- Add TPS25750 traces for status and power status registers. Trace for
  data register won't be added as it doesn't exist in the device.

- Configure sleep mode for TPS25750.

v9:
 - PATCH 1: 
    - Add Reviewed-by
 - PATCH 2..7:
    - No changes
 - PATCH 8:
    - Move of_device_id to its original place
    - Move device data structs to the top of of_device_id
    - Use device_get_match_data to get device data
 - PATCH 9:
    - No changes
 - PATCH 10:
    - Move device data structs to the top of of_device_id
 - PATCH 11,12:
    - No changes
 - PATCH 13,14:
    - Move device data structs to the top of of_device_id
v8:
 - PATCH 1: 
    - Define reg-names at top-level
 - PATCH 2:
    - Add Reviewed-by
 - PATCH 3:
    - Revert mode check return
 - PATCH 4:
    - Return mode when mode is checked
    - Use device_is_compatible instead of of_device_is_compatible
 - PATCH 5,6:
    - No changes
 - PATCH 7:
    - Use device_is_compatible instead of of_device_is_compatible
 - PATCH 8,9:
    - No changes
 - PATCH 10:
    - Change tps->cb to tps->data
 - PATCH 11,12:
    - No changes
 - PATCH 13,14:
    - Change tps->cb to tps->data

v7:
 - PATCH 1: 
    - Define reg at top-level
    - Remove description from reg-names
 - PATCH 2..7: Add tps6598x to the subject
 - PATCH 8:
    - Add tps6598x to the subject
    - Create tps25750 interrupt handler
 - PATCH 9..11: Add tps6598x to the subject
 - PATCH 12: 
    - Add driver name to commit subject
    - Call trace_tps25750_irq directly from tps25750 interrupt
      handler
 - PATCH 13-14: Add tps6598x to the subject
      
v6:
 - PATCH 1: Use reg property for patch address
 - PATCH 2: Use tps6598x_exec_cmd as a wrapper
 - PATCH 3: Return current mode and check it directly
 - PATCH 4:
    - Don't check VID for tps25750 as the VID register doesn't exist
    - Remove is_tps25750 flag from tps6598x struct
    - Get patch address from reg property
 - PATCH 5: Update eeprom macro to use TPS instead
 - PATCH 6: No changes
 - PATCH 7: Check tps25750 using is_compatiable device node
 - PATCH 8: Create tipd callbacks factory 
 - PATCH 9: No changes
 - PATCH 10: Add port registration to tipd data factory
 - PATCH 11: Use tps25750_init instead of tps25750_apply_patch in resume
    	     as it initializes sleep mode
 - PATCH 12: Add trace irq to tipd callbacks factory
 - PATCH 13: Add trace power status to tipd data factory
 - PATCH 14: Add trace status to tipd data factory
v5:
 - PATCH 1: Add tps25750 bindings to tps6598x
 - PATCH 2: Remove tps25750 driver and incorperate tps25750
 	    into tps6598x driver
 - PATCH [3..15]: Incorporating tps25750 into tps6598x driver
v4:
 - PATCH 1: No change
 - PATCH 2: Fix comments style and drop of_match_ptr
v3:
 - PATCH 1: Fix node name
 - PATCH 2: Upload tps25750 driver patch
v2:
 - PATCH 1: General properties clean up

Abdel Alkuor (14):
  dt-bindings: usb: tps6598x: Add tps25750
  USB: typec: tsp6598x: Add cmd timeout and response delay
  USB: typec: tps6598x: Add patch mode to tps6598x
  USB: typec: tps6598x: Load TPS25750 patch bundle
  USB: typec: tps6598x: Check for EEPROM present
  USB: typec: tps6598x: Clear dead battery flag
  USB: typec: tps6598x: Apply patch again after power resume
  USB: typec: tps6598x: Add interrupt support for TPS25750
  USB: typec: tps6598x: Refactor tps6598x port registration
  USB: typec: tps6598x: Add port registration for tps25750
  USB: typec: tps6598x: Enable sleep mode for tps25750
  USB: typec: tps6598x: Add trace for tps25750 irq
  USB: typec: tps6598x: Add power status trace for tps25750
  USB: typec: tps6598x: Add status trace for tps25750

 .../devicetree/bindings/usb/ti,tps6598x.yaml  |  81 ++-
 drivers/usb/typec/tipd/core.c                 | 624 ++++++++++++++++--
 drivers/usb/typec/tipd/tps6598x.h             |  36 +
 drivers/usb/typec/tipd/trace.h                |  92 +++
 4 files changed, 762 insertions(+), 71 deletions(-)

-- 
2.34.1

Powered by blists - more mailing lists