[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20231002-for-ml-tqmls10xxa-v2-test-v3-5-402819b9a29b@ew.tq-group.com>
Date: Mon, 02 Oct 2023 10:43:54 +0200
From: Gregor Herburger <gregor.herburger@...tq-group.com>
To: Shawn Guo <shawnguo@...nel.org>, Li Yang <leoyang.li@....com>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Conor Dooley <conor+dt@...nel.org>
Cc: linux-arm-kernel@...ts.infradead.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, linux@...tq-group.com,
gregor.herburger@...tq-group.com
Subject: [PATCH v3 5/5] arm64: dts: freescale: add initial device tree for
TQMLS1088A
This adds support for TQMLS1088A SOM on MBLS10xxA baseboard.
Signed-off-by: Gregor Herburger <gregor.herburger@...tq-group.com>
---
arch/arm64/boot/dts/freescale/Makefile | 1 +
.../freescale/fsl-ls1088a-tqmls1088a-mbls10xxa.dts | 64 +++++++++
.../boot/dts/freescale/fsl-ls1088a-tqmls1088a.dtsi | 43 ++++++
.../dts/freescale/tqmls1088a-mbls10xxa-mc.dtsi | 146 +++++++++++++++++++++
4 files changed, 254 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile
index 6054527a32ea..a6725700518e 100644
--- a/arch/arm64/boot/dts/freescale/Makefile
+++ b/arch/arm64/boot/dts/freescale/Makefile
@@ -23,6 +23,7 @@ dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1046a-tqmls1046a-mbls10xxa.dtb
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1088a-qds.dtb
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1088a-rdb.dtb
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1088a-ten64.dtb
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1088a-tqmls1088a-mbls10xxa.dtb
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2080a-qds.dtb
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2080a-rdb.dtb
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2081a-rdb.dtb
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a-tqmls1088a-mbls10xxa.dts b/arch/arm64/boot/dts/freescale/fsl-ls1088a-tqmls1088a-mbls10xxa.dts
new file mode 100644
index 000000000000..e567918f6afc
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a-tqmls1088a-mbls10xxa.dts
@@ -0,0 +1,64 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright (c) 2018-2023 TQ-Systems GmbH <linux@...tq-group.com>,
+ * D-82229 Seefeld, Germany.
+ * Author: Gregor Herburger, Timo Herbrecher
+ *
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+
+#include "fsl-ls1088a-tqmls1088a.dtsi"
+#include "tqmls10xxa-mbls10xxa.dtsi"
+
+/ {
+ model = "TQ-Systems GmbH LS1088A TQMLS1088A SoM on MBLS10xxA board";
+ compatible = "tq,ls1088a-tqmls1088a-mbls10xxa", "tq,ls1088a-tqmls1088a",
+ "fsl,ls1088a";
+
+ aliases {
+ dpmac1 = &dpmac1;
+ dpmac2 = &dpmac2;
+ dpmac3 = &dpmac3;
+ dpmac4 = &dpmac4;
+ dpmac5 = &dpmac5;
+ dpmac6 = &dpmac6;
+ dpmac7 = &dpmac7;
+ dpmac8 = &dpmac8;
+ dpmac9 = &dpmac9;
+ dpmac10 = &dpmac10;
+ qsgmii-s1-p1 = &qsgmii1_phy1;
+ qsgmii-s1-p2 = &qsgmii1_phy2;
+ qsgmii-s1-p3 = &qsgmii1_phy3;
+ qsgmii-s1-p4 = &qsgmii1_phy4;
+ qsgmii-s2-p1 = &qsgmii2_phy1;
+ qsgmii-s2-p2 = &qsgmii2_phy2;
+ qsgmii-s2-p3 = &qsgmii2_phy3;
+ qsgmii-s2-p4 = &qsgmii2_phy4;
+ rgmii-s1 = &rgmii_phy1;
+ rgmii-s2 = &rgmii_phy2;
+ serial0 = &duart0;
+ serial1 = &duart1;
+ };
+
+ chosen {
+ stdout-path = &duart1;
+ };
+};
+
+&esdhc {
+ cd-gpios = <&gpio3 12 GPIO_ACTIVE_LOW>;
+ wp-gpios = <&gpio3 13 GPIO_ACTIVE_HIGH>;
+};
+
+&sfp1_i2c {
+ status = "okay";
+};
+
+&sfp2_i2c {
+ status = "okay";
+};
+
+#include "tqmls1088a-mbls10xxa-mc.dtsi"
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a-tqmls1088a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1088a-tqmls1088a.dtsi
new file mode 100644
index 000000000000..40da8d4807de
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a-tqmls1088a.dtsi
@@ -0,0 +1,43 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright (c) 2018-2023 TQ-Systems GmbH <linux@...tq-group.com>,
+ * D-82229 Seefeld, Germany.
+ * Author: Gregor Herburger, Timo Herbrecher
+ *
+ * Device Tree Include file for LS1088A based SoM of TQ
+ */
+
+#include "fsl-ls1088a.dtsi"
+#include "tqmls10xxa.dtsi"
+
+&qspi {
+ num-cs = <2>;
+ status = "okay";
+
+ qflash0: flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ spi-max-frequency = <62500000>;
+ spi-rx-bus-width = <4>;
+ spi-tx-bus-width = <4>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ };
+ };
+
+ qflash1: flash@1 {
+ compatible = "jedec,spi-nor";
+ reg = <1>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ spi-max-frequency = <62500000>;
+ spi-rx-bus-width = <4>;
+ spi-tx-bus-width = <4>;
+ };
+};
+
diff --git a/arch/arm64/boot/dts/freescale/tqmls1088a-mbls10xxa-mc.dtsi b/arch/arm64/boot/dts/freescale/tqmls1088a-mbls10xxa-mc.dtsi
new file mode 100644
index 000000000000..2471bb109e8e
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/tqmls1088a-mbls10xxa-mc.dtsi
@@ -0,0 +1,146 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright (c) 2018-2023 TQ-Systems GmbH <linux@...tq-group.com>,
+ * D-82229 Seefeld, Germany.
+ * Author: Gregor Herburger, Timo Herbrecher
+ *
+ * Device Tree Include file for MBLS10xxA from TQ (MC related sections)
+ */
+
+#include <dt-bindings/net/ti-dp83867.h>
+
+/ {
+ sfp1: sfp1 {
+ compatible = "sff,sfp";
+ i2c-bus = <&sfp1_i2c>;
+ mod-def0-gpios = <&gpioexp2 2 GPIO_ACTIVE_LOW>;
+ los-gpios = <&gpioexp2 3 GPIO_ACTIVE_HIGH>;
+ tx-fault-gpios = <&gpioexp2 0 GPIO_ACTIVE_HIGH>;
+ tx-disable-gpios = <&gpioexp2 1 GPIO_ACTIVE_HIGH>;
+ };
+
+ sfp2: sfp2 {
+ compatible = "sff,sfp";
+ i2c-bus = <&sfp2_i2c>;
+ mod-def0-gpios = <&gpioexp2 10 GPIO_ACTIVE_LOW>;
+ los-gpios = <&gpioexp2 11 GPIO_ACTIVE_HIGH>;
+ tx-fault-gpios = <&gpioexp2 8 GPIO_ACTIVE_HIGH>;
+ tx-disable-gpios = <&gpioexp2 9 GPIO_ACTIVE_HIGH>;
+ };
+};
+
+&dpmac1 {
+ pcs-handle = <&pcs1>;
+};
+
+&dpmac2 {
+ pcs-handle = <&pcs2>;
+};
+
+&dpmac3 {
+ pcs-handle = <&pcs3_0>;
+};
+
+&dpmac4 {
+ pcs-handle = <&pcs3_1>;
+};
+
+&dpmac5 {
+ pcs-handle = <&pcs3_2>;
+};
+
+&dpmac6 {
+ pcs-handle = <&pcs3_3>;
+};
+
+&dpmac7 {
+ pcs-handle = <&pcs7_0>;
+};
+
+&dpmac8 {
+ pcs-handle = <&pcs7_1>;
+};
+
+&dpmac9 {
+ pcs-handle = <&pcs7_2>;
+};
+
+&dpmac10 {
+ pcs-handle = <&pcs7_3>;
+};
+
+&emdio1 {
+ status = "okay";
+
+ qsgmii2_phy1: ethernet-phy@0 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <0x00>;
+ };
+
+ qsgmii2_phy2: ethernet-phy@1 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <0x01>;
+ };
+
+ qsgmii2_phy3: ethernet-phy@2 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <0x02>;
+ };
+
+ qsgmii2_phy4: ethernet-phy@3 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <0x03>;
+ };
+
+ rgmii_phy2: ethernet-phy@c {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <0x0c>;
+ ti,rx-internal-delay = <DP83867_RGMIIDCTL_1_50_NS>;
+ ti,tx-internal-delay = <DP83867_RGMIIDCTL_1_50_NS>;
+ ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_8_B_NIB>;
+ };
+
+ rgmii_phy1: ethernet-phy@e {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <0x0e>;
+ ti,rx-internal-delay = <DP83867_RGMIIDCTL_1_50_NS>;
+ ti,tx-internal-delay = <DP83867_RGMIIDCTL_1_50_NS>;
+ ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_8_B_NIB>;
+ };
+
+ qsgmii1_phy1: ethernet-phy@1c {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <0x1c>;
+ };
+
+ qsgmii1_phy2: ethernet-phy@1d {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <0x1d>;
+ };
+
+ qsgmii1_phy3: ethernet-phy@1e {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <0x1e>;
+ };
+
+ qsgmii1_phy4: ethernet-phy@1f {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <0x1f>;
+ };
+};
+
+&pcs_mdio1 {
+ status = "okay";
+};
+
+&pcs_mdio2 {
+ status = "okay";
+};
+
+&pcs_mdio3 {
+ status = "okay";
+};
+
+&pcs_mdio7 {
+ status = "okay";
+};
--
2.34.1
Powered by blists - more mailing lists