| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Mon, 2 Oct 2023 13:18:14 +0300
From: Antoniu Miclaus <antoniu.miclaus@...log.com>
To: Antoniu Miclaus <antoniu.miclaus@...log.com>,
Jean Delvare <jdelvare@...e.com>,
Guenter Roeck <linux@...ck-us.net>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Conor Dooley <conor+dt@...nel.org>,
Jonathan Corbet <corbet@....net>,
<linux-hwmon@...r.kernel.org>, <devicetree@...r.kernel.org>,
<linux-kernel@...r.kernel.org>, <linux-doc@...r.kernel.org>
Subject: [PATCH v2 1/2] dt-bindings: hwmon: ltc2991: add bindings
Add dt-bindings for ltc2991 octal i2c voltage, current and temperature
monitor.
Signed-off-by: Antoniu Miclaus <antoniu.miclaus@...log.com>
---
changes in v2:
- make compatible const type
- remove `|` where not necessary
- switch to micro-ohms for the shunt resistor property
- add vendor prefix for temperature-enable
.../bindings/hwmon/adi,ltc2991.yaml | 114 ++++++++++++++++++
1 file changed, 114 insertions(+)
create mode 100644 Documentation/devicetree/bindings/hwmon/adi,ltc2991.yaml
diff --git a/Documentation/devicetree/bindings/hwmon/adi,ltc2991.yaml b/Documentation/devicetree/bindings/hwmon/adi,ltc2991.yaml
new file mode 100644
index 000000000000..3811ea07a04f
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/adi,ltc2991.yaml
@@ -0,0 +1,114 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+
+$id: http://devicetree.org/schemas/hwmon/adi,ltc2991.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices LTC2991 Octal I2C Voltage, Current and Temperature Monitor
+
+maintainers:
+ - Antoniu Miclaus <antoniu.miclaus@...log.com>
+
+description: |
+ The LTC2991 is used to monitor system temperatures, voltages and currents.
+ Through the I2C serial interface, the eight monitors can individually measure
+ supply voltages and can be paired for differential measurements of current
+ sense resistors or temperature sensing transistors.
+
+ Datasheet:
+ https://www.analog.com/en/products/ltc2991.html
+
+properties:
+ compatible:
+ const: adi,ltc2991
+
+ reg:
+ maxItems: 1
+
+ '#address-cells':
+ const: 1
+
+ '#size-cells':
+ const: 0
+
+ vcc-supply: true
+
+patternProperties:
+ "^channel@[0-3]$":
+ type: object
+ description:
+ Represents the differential/temperature channels.
+
+ properties:
+ reg:
+ description:
+ The channel number. LTC2991 can monitor 4 currents/temperatures.
+ items:
+ minimum: 0
+ maximum: 3
+
+ shunt-resistor-micro-ohms:
+ description:
+ The value of curent sense resistor in miliohms. Enables differential
+ input pair.
+
+ adi,temperature-enable:
+ description:
+ Enables temperature readings for a input pair.
+ type: boolean
+
+required:
+ - compatible
+ - reg
+ - vcc-supply
+
+additionalProperties: false
+
+examples:
+ - |
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ hwmon@48 {
+ compatible = "adi,ltc2991";
+ reg = <0x48>;
+ vcc-supply = <&vcc>;
+ };
+ };
+ - |
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ hwmon@48 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ compatible = "adi,ltc2991";
+ reg = <0x48>;
+ vcc-supply = <&vcc>;
+
+ channel@0 {
+ reg = <0x0>;
+ shunt-resistor-micro-ohms = <100000>;
+ };
+
+ channel@1 {
+ reg = <0x1>;
+ shunt-resistor-micro-ohms = <100000>;
+ };
+
+ channel@2 {
+ reg = <0x2>;
+ temperature-enable;
+ };
+
+ channel@3 {
+ reg = <0x3>;
+ temperature-enable;
+ };
+ };
+ };
+...
--
2.42.0
Powered by blists - more mailing lists