[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20231002120617.119602-1-benjamin.gaignard@collabora.com>
Date: Mon, 2 Oct 2023 14:05:24 +0200
From: Benjamin Gaignard <benjamin.gaignard@...labora.com>
To: mchehab@...nel.org, tfiga@...omium.org, m.szyprowski@...sung.com,
ming.qian@....com, ezequiel@...guardiasur.com.ar,
p.zabel@...gutronix.de, gregkh@...uxfoundation.org,
hverkuil-cisco@...all.nl, nicolas.dufresne@...labora.com
Cc: linux-media@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org,
linux-mediatek@...ts.infradead.org, linux-arm-msm@...r.kernel.org,
linux-rockchip@...ts.infradead.org, linux-staging@...ts.linux.dev,
kernel@...labora.com,
Benjamin Gaignard <benjamin.gaignard@...labora.com>
Subject: [PATCH v9 00/53] Add DELETE_BUF ioctl
Unlike when resolution change on keyframes, dynamic resolution change
on inter frames doesn't allow to do a stream off/on sequence because
it is need to keep all previous references alive to decode inter frames.
This constraint have two main problems:
- more memory consumption.
- more buffers in use.
To solve these issue this series introduce DELETE_BUFS ioctl and remove
the 32 buffers limit per queue.
VP9 conformance tests using fluster give a score of 210/305.
The 24 resize inter tests (vp90-2-21-resize_inter_* files) are ok
but require to use postprocessor.
Kernel branch is available here:
https://gitlab.collabora.com/benjamin.gaignard/for-upstream/-/commits/remove_vb2_queue_limit_v9
GStreamer branch to use DELETE_BUF ioctl and testing dynamic resolution
change is here:
https://gitlab.freedesktop.org/benjamin.gaignard1/gstreamer/-/commits/VP9_drc
changes in version 9:
- BUFFER_INDEX_MASK now depends on PAGE_SHIFT value to match
architectures requirements.
- Correctly initialize max_num_buffers in vb2_core_queue_init()
- run 'test-media -kmemleak mc' on top of the series and on patches 1 to 47 without failures.
- fix compilation issue in patch 50
changes in version 8:
- Add V4L2_BUF_CAP_SUPPORTS_SET_MAX_BUFS and new 'max_buffers' field in v4l2_create_buffers
structure to report the maximum number of buffers that a queue could allocate.
- Add V4L2_BUF_CAP_SUPPORTS_DELETE_BUFS to indicate that a queue support
DELETE_BUFS ioctl.
- Make some test drivers use more than 32 buffers and DELETE_BUFS ioctl.
- Fix remarks done by Hans
- Move "media: core: Rework how create_buf index returned value is
computed" patch to the top of the serie.
changes in version 7:
- Use a bitmap to know which entries are valid in queue bufs array.
The number of buffers in the queue could must calculated from the
bitmap so num_buffers becomes useless. This led to add quite few
patches to remove it from all the drivers.
Note: despiste my attention I may have miss some calls to
num_buffers...
- Split patches to make them more readable.
- Run v4l2-compliance with additional delete-bufs tests.
- Run ./test-media -kmemleak vivid and no more failures.
Note: I had to remove USERPTR streaming test because they to much
frequentely hit get_framevec bug. It is not related to my series
since this happens all the time on master branch.
- Fix Hans remarks on v6
changes in version 6:
- Get a patch per driver to use vb2_get_buffer() instead of directly access
to queue buffers array.
- Add lock in vb2_core_delete_buf()
- Use vb2_buffer instead of index
- Fix various comments
- Change buffer index name to BUFFER_INDEX_MASK
- Stop spamming kernel log with unbalanced counters
changes in version 5:
- Rework offset cookie encoding pattern is n ow the first patch of the
serie.
- Use static array instead of allocated one for postprocessor buffers.
changes in version 4:
- Stop using Xarray, instead let queues decide about their own maximum
number of buffer and allocate bufs array given that value.
- Rework offset cookie encoding pattern.
- Change DELETE_BUF to DELETE_BUFS because it now usable for
range of buffer to be symetrical of CREATE_BUFS.
- Add fixes tags on couple of Verisilicon related patches.
- Be smarter in Verisilicon postprocessor buffers management.
- Rebase on top of v6.4
changes in version 3:
- Use Xarray API to store allocated video buffers.
- No module parameter to limit the number of buffer per queue.
- Use Xarray inside Verisilicon driver to store postprocessor buffers
and remove VB2_MAX_FRAME limit.
- Allow Versilicon driver to change of resolution while streaming
- Various fixes the Verisilicon VP9 code to improve fluster score.
changes in version 2:
- Use a dynamic array and not a list to keep trace of allocated buffers.
Not use IDR interface because it is marked as deprecated in kernel
documentation.
- Add a module parameter to limit the number of buffer per queue.
- Add DELETE_BUF ioctl and m2m helpers.
Regards,
Benjamin
Benjamin Gaignard (53):
media: videobuf2: Rework offset 'cookie' encoding pattern
media: videobuf2: Stop spamming kernel log with all queue counter
media: videobuf2: Use vb2_buffer instead of index
media: amphion: Use vb2_get_buffer() instead of directly access to
buffers array
media: mediatek: jpeg: Use vb2_get_buffer() instead of directly access
to buffers array
media: mediatek: vdec: Remove useless loop
media: sti: hva: Use vb2_get_buffer() instead of directly access to
buffers array
media: visl: Use vb2_get_buffer() instead of directly access to
buffers array
media: atomisp: Use vb2_get_buffer() instead of directly access to
buffers array
media: dvb-core: Use vb2_get_buffer() instead of directly access to
buffers array
media: videobuf2: Access vb2_queue bufs array through helper functions
media: videobuf2: Be more flexible on the number of queue stored
buffers
media: Report the maximum possible number of buffers for the queue
media: test-drivers: vivid: Increase max supported buffers for capture
queues
media: test-drivers: vicodec: Increase max supported capture queue
buffers
media: verisilicon: Refactor postprocessor to store more buffers
media: verisilicon: Store chroma and motion vectors offset
media: verisilicon: g2: Use common helpers to compute chroma and mv
offsets
media: verisilicon: vp9: Allow to change resolution while streaming
media: Remove duplicated index vs q->num_buffers check
media: core: Add helper to get queue number of buffers
media: dvb-core: Do not initialize twice queue num_buffer field
media: dvb-frontends: rtl2832_srd: Use queue min_buffers_needed field
media: video-i2c: Set min_buffers_needed to 2
media: pci: cx18: Set correct value to min_buffers_needed field
media: pci: dt3155: Remove useless check
media: pci: netup_unidvb: Remove useless number of buffers check
media: pci: tw68: Stop direct calls to queue num_buffers field
media: pci: tw686x: Set min_buffers_needed to 3
media: amphion: Stop direct calls to queue num_buffers field
media: coda: Stop direct calls to queue num_buffers field
media: mediatek: vcodec: Stop direct calls to queue num_buffers field
media: nxp: Stop direct calls to queue num_buffers field
media: renesas: Set min_buffers_needed to 16
media: ti: Use queue min_buffers_needed field to set the min number of
buffers
media: verisilicon: Stop direct calls to queue num_buffers field
media: test-drivers: Stop direct calls to queue num_buffers field
media: usb: airspy: Set min_buffers_needed to 8
media: usb: cx231xx: Set min_buffers_needed to CX231XX_MIN_BUF
media: usb: hackrf: Set min_buffers_needed to 8
media: usb: usbtv: Set min_buffers_needed to 2
media: atomisp: Stop direct calls to queue num_buffers field
media: imx: Stop direct calls to queue num_buffers field
media: meson: vdec: Stop direct calls to queue num_buffers field
touchscreen: sur40: Stop direct calls to queue num_buffers field
sample: v4l: Stop direct calls to queue num_buffers field
media: cedrus: Stop direct calls to queue num_buffers field
media: core: Rework how create_buf index returned value is computed
media: core: Add bitmap manage bufs array entries
media: core: Free range of buffers
media: v4l2: Add DELETE_BUFS ioctl
media: v4l2: Add mem2mem helpers for DELETE_BUFS ioctl
media: test-drivers: Use helper for DELETE_BUFS ioctl
.../userspace-api/media/v4l/user-func.rst | 1 +
.../media/v4l/vidioc-create-bufs.rst | 8 +-
.../media/v4l/vidioc-delete-bufs.rst | 80 +++
.../media/v4l/vidioc-reqbufs.rst | 2 +
drivers/input/touchscreen/sur40.c | 5 +-
.../media/common/videobuf2/videobuf2-core.c | 553 +++++++++++-------
.../media/common/videobuf2/videobuf2-v4l2.c | 118 +++-
drivers/media/dvb-core/dvb_vb2.c | 17 +-
drivers/media/dvb-frontends/rtl2832_sdr.c | 9 +-
drivers/media/i2c/video-i2c.c | 5 +-
drivers/media/pci/cx18/cx18-streams.c | 13 +-
drivers/media/pci/dt3155/dt3155.c | 2 -
.../pci/netup_unidvb/netup_unidvb_core.c | 4 +-
drivers/media/pci/tw68/tw68-video.c | 6 +-
drivers/media/pci/tw686x/tw686x-video.c | 13 +-
drivers/media/platform/amphion/vpu_dbg.c | 30 +-
drivers/media/platform/amphion/vpu_v4l2.c | 4 +-
.../media/platform/chips-media/coda-common.c | 2 +-
.../platform/mediatek/jpeg/mtk_jpeg_core.c | 7 +-
.../vcodec/decoder/vdec/vdec_vp9_req_lat_if.c | 9 +-
.../mediatek/vcodec/encoder/mtk_vcodec_enc.c | 2 +-
drivers/media/platform/nxp/imx7-media-csi.c | 7 +-
drivers/media/platform/renesas/rcar_drif.c | 8 +-
drivers/media/platform/st/sti/hva/hva-v4l2.c | 9 +-
.../media/platform/ti/am437x/am437x-vpfe.c | 7 +-
drivers/media/platform/ti/cal/cal-video.c | 5 +-
.../media/platform/ti/davinci/vpif_capture.c | 5 +-
.../media/platform/ti/davinci/vpif_display.c | 5 +-
drivers/media/platform/ti/omap/omap_vout.c | 5 +-
drivers/media/platform/verisilicon/hantro.h | 9 +-
.../media/platform/verisilicon/hantro_drv.c | 5 +-
.../media/platform/verisilicon/hantro_g2.c | 14 +
.../platform/verisilicon/hantro_g2_hevc_dec.c | 18 +-
.../platform/verisilicon/hantro_g2_vp9_dec.c | 28 +-
.../media/platform/verisilicon/hantro_hw.h | 7 +-
.../platform/verisilicon/hantro_postproc.c | 93 ++-
.../media/platform/verisilicon/hantro_v4l2.c | 27 +-
.../media/test-drivers/vicodec/vicodec-core.c | 3 +
drivers/media/test-drivers/vim2m.c | 2 +
.../media/test-drivers/vimc/vimc-capture.c | 2 +
drivers/media/test-drivers/visl/visl-dec.c | 32 +-
drivers/media/test-drivers/visl/visl-video.c | 2 +
drivers/media/test-drivers/vivid/vivid-core.c | 14 +
.../media/test-drivers/vivid/vivid-meta-cap.c | 3 -
.../media/test-drivers/vivid/vivid-meta-out.c | 5 +-
.../test-drivers/vivid/vivid-touch-cap.c | 5 +-
.../media/test-drivers/vivid/vivid-vbi-cap.c | 5 +-
.../media/test-drivers/vivid/vivid-vbi-out.c | 5 +-
.../media/test-drivers/vivid/vivid-vid-cap.c | 5 +-
.../media/test-drivers/vivid/vivid-vid-out.c | 5 +-
drivers/media/usb/airspy/airspy.c | 9 +-
drivers/media/usb/cx231xx/cx231xx-417.c | 4 +-
drivers/media/usb/cx231xx/cx231xx-video.c | 4 +-
drivers/media/usb/hackrf/hackrf.c | 9 +-
drivers/media/usb/usbtv/usbtv-video.c | 3 +-
drivers/media/v4l2-core/v4l2-dev.c | 1 +
drivers/media/v4l2-core/v4l2-ioctl.c | 21 +-
drivers/media/v4l2-core/v4l2-mem2mem.c | 20 +
.../staging/media/atomisp/pci/atomisp_ioctl.c | 4 +-
drivers/staging/media/imx/imx-media-capture.c | 7 +-
drivers/staging/media/meson/vdec/vdec.c | 13 +-
.../staging/media/sunxi/cedrus/cedrus_h264.c | 8 +-
.../staging/media/sunxi/cedrus/cedrus_h265.c | 9 +-
include/media/v4l2-ioctl.h | 4 +
include/media/v4l2-mem2mem.h | 12 +
include/media/videobuf2-core.h | 65 +-
include/media/videobuf2-v4l2.h | 13 +
include/uapi/linux/videodev2.h | 24 +-
samples/v4l/v4l2-pci-skeleton.c | 5 +-
69 files changed, 964 insertions(+), 501 deletions(-)
create mode 100644 Documentation/userspace-api/media/v4l/vidioc-delete-bufs.rst
--
2.39.2
Powered by blists - more mailing lists