linux-kernel - [PATCH 0/3] net: netconsole: configfs entries for boot target

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-Id: <20231002155349.2032826-1-leitao@debian.org>
Date:   Mon,  2 Oct 2023 08:53:46 -0700
From:   Breno Leitao <leitao@...ian.org>
To:     jlbec@...lplan.org, kuba@...nel.org, davem@...emloft.net,
        pabeni@...hat.com
Cc:     hch@....de, netdev@...r.kernel.org, linux-kernel@...r.kernel.org,
        horms@...nel.org
Subject: [PATCH 0/3] net: netconsole: configfs entries for boot target

There is a limitation in netconsole, where it is impossible to
disable or modify the target created from the command line parameter.
(netconsole=...).

"netconsole" cmdline parameter sets the remote IP, and if the remote IP
changes, the machine needs to be rebooted (with the new remote IP set in
the command line parameter).

This allows the user to modify a target without the need to restart the
machine.

This functionality sits on top of the dynamic target reconfiguration that is
already implemented in netconsole.

The way to modify a boot time target is creating special named configfs
directories, that will be associated with the targets coming from
`netconsole=...`.

Example:

Let's suppose you have two netconsole targets defined at boot time::

 netconsole=4444@...0.0.1/eth1,9353@...0.0.2/12:34:56:78:9a:bc;4444@...0.0.1/eth1,9353@...0.0.3/12:34:56:78:9a:bc

You can modify these targets in runtime by creating the following targets::

 $ mkdir cmdline1
 $ cat cmdline1/remote_ip
 10.0.0.3
 $ echo 0 > cmdline1/enabled
 $ echo 10.0.0.4 > cmdline1/remote_ip
 $ echo 1 > cmdline1/enabled

Breno Leitao (3):
  netconsole: Initialize configfs_item for default targets
  netconsole: Attach cmdline target to dynamic target
  Documentation: netconsole: add support for cmdline targets

 Documentation/networking/netconsole.rst | 21 ++++++++--
 drivers/net/netconsole.c                | 51 ++++++++++++++++++++++++-
 2 files changed, 67 insertions(+), 5 deletions(-)

-- 
2.34.1