| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <CAJZ5v0ggY7r2u26vBARy=WGxh0p_72fa7=mbxz1jJAH9dkDBpg@mail.gmail.com>
Date: Tue, 3 Oct 2023 20:32:55 +0200
From: "Rafael J. Wysocki" <rafael@...nel.org>
To: D Scott Phillips <scott@...amperecomputing.com>
Cc: linux-acpi@...r.kernel.org, linux-pci@...r.kernel.org,
"Rafael J. Wysocki" <rafael@...nel.org>,
Bjorn Helgaas <helgaas@...nel.org>,
linux-kernel@...r.kernel.org, Len Brown <lenb@...nel.org>,
Darren Hart <darren@...amperecomputing.com>,
patches@...erecomputing.com
Subject: Re: [PATCH v2 2/2] PCI: hotplug: Add extension driver for Ampere
Altra hotplug LED control
On Sat, Sep 30, 2023 at 2:20 AM D Scott Phillips
<scott@...amperecomputing.com> wrote:
>
> On Ampere Altra, PCIe hotplug is handled through ACPI. A side interface is
> also present to request system firmware control of attention LEDs. Add an
> ACPI PCI Hotplug companion driver to support attention LED control.
>
> Signed-off-by: D Scott Phillips <scott@...amperecomputing.com>
Acked-by: Rafael J. Wysocki <rafael@...nel.org>
for the probing part.
> ---
> Changes since v1:
> - remove build-as-module restriction
> - add some more description
> - don't open code PCI_SLOT()
> - convert to a platform driver
>
> drivers/pci/hotplug/Kconfig | 12 ++
> drivers/pci/hotplug/Makefile | 1 +
> drivers/pci/hotplug/acpiphp_ampere_altra.c | 127 +++++++++++++++++++++
> 3 files changed, 140 insertions(+)
> create mode 100644 drivers/pci/hotplug/acpiphp_ampere_altra.c
>
> diff --git a/drivers/pci/hotplug/Kconfig b/drivers/pci/hotplug/Kconfig
> index 48113b210cf93..1472aef0fb812 100644
> --- a/drivers/pci/hotplug/Kconfig
> +++ b/drivers/pci/hotplug/Kconfig
> @@ -61,6 +61,18 @@ config HOTPLUG_PCI_ACPI
>
> When in doubt, say N.
>
> +config HOTPLUG_PCI_ACPI_AMPERE_ALTRA
> + tristate "ACPI PCI Hotplug driver Ampere Altra extensions"
> + depends on HOTPLUG_PCI_ACPI
> + depends on HAVE_ARM_SMCCC_DISCOVERY
> + help
> + Say Y here if you have an Ampere Altra system.
> +
> + To compile this driver as a module, choose M here: the
> + module will be called acpiphp_ampere_altra.
> +
> + When in doubt, say N.
> +
> config HOTPLUG_PCI_ACPI_IBM
> tristate "ACPI PCI Hotplug driver IBM extensions"
> depends on HOTPLUG_PCI_ACPI
> diff --git a/drivers/pci/hotplug/Makefile b/drivers/pci/hotplug/Makefile
> index 5196983220df6..240c99517d5e9 100644
> --- a/drivers/pci/hotplug/Makefile
> +++ b/drivers/pci/hotplug/Makefile
> @@ -23,6 +23,7 @@ obj-$(CONFIG_HOTPLUG_PCI_S390) += s390_pci_hpc.o
>
> # acpiphp_ibm extends acpiphp, so should be linked afterwards.
>
> +obj-$(CONFIG_HOTPLUG_PCI_ACPI_AMPERE_ALTRA) += acpiphp_ampere_altra.o
> obj-$(CONFIG_HOTPLUG_PCI_ACPI_IBM) += acpiphp_ibm.o
>
> pci_hotplug-objs := pci_hotplug_core.o
> diff --git a/drivers/pci/hotplug/acpiphp_ampere_altra.c b/drivers/pci/hotplug/acpiphp_ampere_altra.c
> new file mode 100644
> index 0000000000000..1b1fe5d6a3fbf
> --- /dev/null
> +++ b/drivers/pci/hotplug/acpiphp_ampere_altra.c
> @@ -0,0 +1,127 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * ACPI PCI Hot Plug Extension for Ampere Altra. Allows control of
> + * attention LEDs via requests to system firmware.
> + *
> + * Copyright (C) 2023 Ampere Computing LLC
> + */
> +
> +#define pr_fmt(fmt) "acpiphp_ampere_altra: " fmt
> +
> +#include <linux/init.h>
> +#include <linux/module.h>
> +#include <linux/pci.h>
> +#include <linux/pci_hotplug.h>
> +#include <linux/platform_device.h>
> +
> +#include "acpiphp.h"
> +
> +#define HANDLE_OPEN 0xb0200000
> +#define HANDLE_CLOSE 0xb0300000
> +#define REQUEST 0xf0700000
> +#define LED_CMD 0x00000004
> +#define LED_ATTENTION 0x00000002
> +#define LED_SET_ON 0x00000001
> +#define LED_SET_OFF 0x00000002
> +#define LED_SET_BLINK 0x00000003
> +
> +static u32 led_service_id[4];
> +
> +static int led_status(u8 status)
> +{
> + switch (status) {
> + case 1: return LED_SET_ON;
> + case 2: return LED_SET_BLINK;
> + default: return LED_SET_OFF;
> + }
> +}
> +
> +static int set_attention_status(struct hotplug_slot *slot, u8 status)
> +{
> + struct arm_smccc_res res;
> + struct pci_bus *bus;
> + struct pci_dev *root_port;
> + unsigned long flags;
> + u32 handle;
> + int ret = 0;
> +
> + bus = slot->pci_slot->bus;
> + root_port = pcie_find_root_port(bus->self);
> + if (!root_port)
> + return -ENODEV;
> +
> + local_irq_save(flags);
> + arm_smccc_smc(HANDLE_OPEN, led_service_id[0], led_service_id[1],
> + led_service_id[2], led_service_id[3], 0, 0, 0, &res);
> + if (res.a0) {
> + ret = -ENODEV;
> + goto out;
> + }
> + handle = res.a1 & 0xffff0000;
> +
> + arm_smccc_smc(REQUEST, LED_CMD, led_status(status), LED_ATTENTION,
> + pci_domain_nr(bus) | (PCI_SLOT(root_port->devfn) << 4), 0, 0,
> + handle, &res);
> + if (res.a0)
> + ret = -ENODEV;
> +
> + arm_smccc_smc(HANDLE_CLOSE, handle, 0, 0, 0, 0, 0, 0, &res);
> +
> + out:
> + local_irq_restore(flags);
> + return ret;
> +}
> +
> +static int get_attention_status(struct hotplug_slot *slot, u8 *status)
> +{
> + return -EINVAL;
> +}
> +
> +static struct acpiphp_attention_info ampere_altra_attn = {
> + .set_attn = set_attention_status,
> + .get_attn = get_attention_status,
> + .owner = THIS_MODULE,
> +};
> +
> +static int altra_led_probe(struct platform_device *pdev)
> +{
> + struct fwnode_handle *fwnode = dev_fwnode(&pdev->dev);
> + int ret;
> +
> + ret = fwnode_property_read_u32_array(fwnode, "uuid", led_service_id, 4);
> + if (ret) {
> + dev_err(&pdev->dev, "can't find uuid\n");
> + return ret;
> + }
> +
> + ret = acpiphp_register_attention(&ere_altra_attn);
> + if (ret) {
> + dev_err(&pdev->dev, "can't register driver\n");
> + return ret;
> + }
> + return 0;
> +}
> +
> +static void altra_led_remove(struct platform_device *pdev)
> +{
> + acpiphp_unregister_attention(&ere_altra_attn);
> +}
> +
> +static const struct acpi_device_id altra_led_ids[] = {
> + { "AMPC0008", 0 },
> + { }
> +};
> +MODULE_DEVICE_TABLE(acpi, altra_led_ids);
> +
> +static struct platform_driver altra_led_driver = {
> + .driver = {
> + .name = "ampere-altra-leds",
> + .acpi_match_table = altra_led_ids,
> + },
> + .probe = altra_led_probe,
> + .remove_new = altra_led_remove,
> +};
> +module_platform_driver(altra_led_driver);
> +
> +MODULE_AUTHOR("D Scott Phillips <scott@...amperecomputing.com>");
> +MODULE_LICENSE("GPL");
> --
> 2.41.0
>
Powered by blists - more mailing lists